new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 19

Does Unlearning Survive Collaboration? Robust Unlearning for Shared-Model LLM Teams

LLM unlearning is essential for removing sensitive or unwanted knowledge while preserving useful capabilities. As LLM teams are increasingly used to solve complex problems, forgetting must remain effective during collaboration. Despite advances in forgetting effectiveness, efficiency, and robustness to relearning, team deployment remains underexplored. We find that collaboration weakens forgetting: final-answer evaluations miss recoverable evidence in team messages, including complementary clues supporting joint recovery. We establish theoretically and confirm empirically that controlling final answers or individual messages does not ensure low recovery from their combination. To address this challenge, we propose Aggregation-Conditioned Unlearning (ACU). ACU trains a shared model using reconstruction feedback from individual and pooled messages, prioritizes views with higher recovery risk, and uses replacement-based credit assignment while protecting direct and collaborative utility. TOFU evaluates trajectory-level recovery, while WMDP-bio tests native forgetting and retained utility. On TOFU, ACU lowers full-trajectory recovery from 41.8% to 19.3% in ROUGE-L recall and factual recovery from 34.2% to 18.7% versus output-supervised training, with comparable retained-task performance. These results demonstrate that ACU curbs information leakage in LLM teams and generalizes across team sizes and readers.

  • 8 authors
·
Oct 18

Aligning Agents via Planning: A Benchmark for Trajectory-Level Reward Modeling

In classical Reinforcement Learning from Human Feedback (RLHF), Reward Models (RMs) serve as the fundamental signal provider for model alignment. As Large Language Models evolve into agentic systems capable of autonomous tool invocation and complex reasoning, the paradigm of reward modeling faces unprecedented challenges--most notably, the lack of benchmarks specifically designed to assess RM capabilities within tool-integrated environments. To address this gap, we present Plan-RewardBench, a trajectory-level preference benchmark designed to evaluate how well judges distinguish preferred versus distractor agent trajectories in complex tool-using scenarios. Plan-RewardBench covers four representative task families -- (i) Safety Refusal, (ii) Tool-Irrelevance / Unavailability, (iii) Complex Planning, and (iv) Robust Error Recovery -- comprising validated positive trajectories and confusable hard negatives constructed via multi-model natural rollouts, rule-based perturbations, and minimal-edit LLM perturbations. We benchmark representative RMs (generative, discriminative, and LLM-as-Judge) under a unified pairwise protocol, reporting accuracy trends across varying trajectory lengths and task categories. Furthermore, we provide diagnostic analyses of prevalent failure modes. Our results reveal that all three evaluator families face substantial challenges, with performance degrading sharply on long-horizon trajectories, underscoring the necessity for specialized training in agentic, trajectory-level reward modeling. Ultimately, Plan-RewardBench aims to serve as both a practical evaluation suite and a reusable blueprint for constructing agentic planning preference data.

  • 6 authors
·
Apr 8

Reinforcement Learning Foundations for Deep Research Systems: A Survey

Deep research systems, agentic AI that solve complex, multi-step tasks by coordinating reasoning, search across the open web and user files, and tool use, are moving toward hierarchical deployments with a Planner, Coordinator, and Executors. In practice, training entire stacks end-to-end remains impractical, so most work trains a single planner connected to core tools such as search, browsing, and code. While SFT imparts protocol fidelity, it suffers from imitation and exposure biases and underuses environment feedback. Preference alignment methods such as DPO are schema and proxy-dependent, off-policy, and weak for long-horizon credit assignment and multi-objective trade-offs. A further limitation of SFT and DPO is their reliance on human defined decision points and subskills through schema design and labeled comparisons. Reinforcement learning aligns with closed-loop, tool-interaction research by optimizing trajectory-level policies, enabling exploration, recovery behaviors, and principled credit assignment, and it reduces dependence on such human priors and rater biases. This survey is, to our knowledge, the first dedicated to the RL foundations of deep research systems. It systematizes work after DeepSeek-R1 along three axes: (i) data synthesis and curation; (ii) RL methods for agentic research covering stability, sample efficiency, long context handling, reward and credit design, multi-objective optimization, and multimodal integration; and (iii) agentic RL training systems and frameworks. We also cover agent architecture and coordination, as well as evaluation and benchmarks, including recent QA, VQA, long-form synthesis, and domain-grounded, tool-interaction tasks. We distill recurring patterns, surface infrastructure bottlenecks, and offer practical guidance for training robust, transparent deep research agents with RL.

  • 11 authors
·
Sep 8, 2025 2

The Compliance Trap: Diagnosing How AI Agents Consume Conflicting Memory

Memory is becoming a core component of long-horizon AI agents, allowing agents to reuse past experience when operating web browsers, software tools, and other interactive environments. Existing work mostly treats memory as a supply problem, asking what experience to write, how to store it, and which entry to retrieve for the next task. Yet we still lack a clear account of how models consume retrieved memory across a multi-step action trajectory. This consumption process matters because it determines not only what memories should be retrieved, but also what models and control policies are needed to use them safely. To diagnose this process, we propose Entry--Propagation--Recovery (E-P-R), a trajectory-level framework that asks where memory first changes an action, whether that change carries forward, and whether the agent can recover after leaving a correct path. We instantiate E-P-R on WebArena and on MemTrapBench, a controlled benchmark we build to isolate these phases. We find that the main failure often begins at entry: agents adopt conflicting memory at the first exposed decision point even when it is task-wrong. Repeated exposure then amplifies this early error, while recovery after divergence is weak. Together, these effects create a compliance trap: across models, conflicting memory induces similar compliance rates, but once agents comply, their success rates collapse to a low floor. Stronger agents therefore suffer larger absolute damage because each compliance event erases more baseline capability. These results suggest that memory-augmented agents should be evaluated not only by retrieval quality or final success rate, but by how they consume memory throughout the trajectory.

  • 3 authors
·
Jul 11

DecisionTraceBench: Tracking Decision-Critical Information in Multi-Party Spoken Conversations

In high-stakes domains such as finance, critical information evolves through multi-party interaction. Recovering these changes and their sources is fundamental to reliable speech understanding. Existing speech benchmarks focus on transcription, local understanding, and turn-level state prediction, leaving joint decision evolution across speakers insufficiently evaluated. We introduce DecisionTraceBench, a speech state-tracking benchmark for Decision-Critical Information State Tracking (DCIST). It jointly evaluates decision event sequences, speaker attribution, scope, and temporal evidence, using trajectory-level F1 to measure complete event-chain recovery. Our dataset comprises Chinese financial dialogues involving two to four speakers, with 100.39 hours of synthetic audio and 8.61 hours of human-performed recordings. On a fixed cohort of human-performed recordings, five cascaded systems and two direct-audio models achieve DCIST scores of 5.73% to 21.35%. Ablations with speaker-labeled reference scripts and no temporal localization requirements yield a maximum score of only 38.72%. Audio perturbation experiments further show that overall transcription error rates do not adequately reflect complete trajectory recovery. These findings reveal limitations in jointly understanding information provenance and state evolution, providing a benchmark for evaluating decision-process understanding and decision traceability in high-stakes speech applications.

  • 6 authors
·
Oct 25

Long-Horizon Agent Trajectory Attribution: A Unified Benchmark and Fine-Grained Annotation Framework

Large language model (LLM) agents increasingly operate through long-horizon trajectories involving user instructions, tool use, external observations, and memory. Existing benchmarks primarily evaluate behavioral outcomes but provide limited support for fine-grained attribution analysis. We introduce trajectory attribution and develop a benchmark and annotation framework for this task. The benchmark organizes heterogeneous trajectories under a unified component schema and provides annotations of the primary attribution component, together with attack and execution chains where applicable. Instantiating the benchmark with trajectories from AgentDojo and the Stage and Canary settings of Agent3Sigma yields more than 1,300 annotated trajectories covering task-aligned actions, unsafe actions, and safety refusals. The benchmark defines two evaluation tasks, primary attribution localization and attribution-chain recovery, and provides reference baselines based on incremental trajectory contribution and component-level leave-one-out perturbation. It captures diverse attribution settings, including local and long-range attribution as well as structured attribution chains. Reference baseline results exhibit substantial performance differences across these settings, providing an initial characterization of the benchmark's attribution challenges. Beyond this initial instantiation, we release a reusable annotation skill that enables trajectories generated by new agent models to be standardized, annotated, and evaluated under the same framework. Project resources and future releases are available at https://github.com/chenjing-2024/agent-trajectory-attribution.

  • 5 authors
·
Aug 6

Trajectory-Level Speculation with Semantic Verification for Tool-Using Agents

Large language model agents solve tasks through long sequences of tool calls, and the prevailing design has a single strong model generate every step, although many steps are routine enough for a much smaller model. Existing ways of sharing this work keep the strong model as the generator: routers and collaborative agents decide which model handles each query or step, and speculative methods check a small model's drafts one step at a time, usually against the strong model's own action. We introduce SpecAgent, a collaboration protocol that turns the strong model from the author of each step into a reviewer of steps drafted by a weak model. The weak model executes read-only tool calls as it drafts, so that every step is grounded in real observations, and holds the first action that would modify the environment. The strong model then verifies the drafted segment in a single prefill pass, commits the longest prefix it judges semantically valid, and repairs the first rejected step. Because verification replaces autoregressive decoding with parallel prefill, the strong model decodes only short verdicts and occasional repairs rather than every step. On τ^2-Bench, SpecAgent comes within one point of the strong model's success rate while roughly halving memory traffic and wall time, and on AutomationBench and VitaBench it recovers 44-75% of the quality gap while lowering both. In an edge-cloud deployment on MCP-Atlas with three cloud models, it closes 53-75% of the weak-strong quality gap while the strong model generates at most half as many tokens. These results suggest that a strong model need not author every step of an agent: reviewing grounded drafts retains most of its quality while cutting both latency and memory traffic.

  • 5 authors
·
Oct 14 2

UniMetric: Universal Metric Scale Recovery for Visual Geometry Foundation Models

Recent advances in multimodal foundation models, exemplified by GPT-6 Astra, raise the prospect of general-purpose embodied reasoning and planning. Using Internet videos for embodied pretraining calls for reliable physical-scale annotations. Yet visual geometry foundation models often recover scene structure and camera motion without reliable metric scale. We show that uncertain size priors of familiar objects can jointly constrain a reconstruction's shared scale. Building on this insight, we present UniMetric, a universal and training-free metric scale recovery framework for geometry foundation models, without additional sensors or task-specific metric supervision. Specifically, Metric Prior Acquisition elicits object height intervals from a vision-language model. Semantic-Geometric Alignment measures reconstructed object heights along the estimated support-surface normal in each frame and converts the priors into scale intervals. Global Scale Recovery reconciles these intervals through a convex objective, yielding a jointly feasible scale when they overlap and a unique compromise otherwise. The estimated sequence-level scale is applied uniformly to reconstructed points and camera translations. Controlled experiments with real VLM priors show that combining observations improves scale accuracy with exact relative object heights. To evaluate metric accuracy on GFM reconstructions without ground-truth scale alignment, we introduce MetricBench, covering twelve embodied, driving, and roadside subsets with sensor-derived ground truth. Across nine geometry foundation models, UniMetric reduces mean depth Abs Rel, reconstruction Chamfer distance, and trajectory error by 54.2%, 83.8%, and 65.6%, respectively, improving every model on all three tasks at the suite level. We release the UniMetric code and MetricBench data.

  • 8 authors
·
Oct 11

Mobility Anomaly Generation using LLM-Driven Behavior with Kinematic Constraints

Although the study of human trajectory anomalies is critical for advancing spatial data mining, empirical research remains severely hindered by a pervasive lack of ground-truth datasets. Despite the availability of several real-world and simulated human trajectory collections, these datasets exclusively capture normal mobility patterns and lack annotated anomalies. This specific scarcity is fundamentally driven by the inherent statistical rarity of anomalous events, precluding the feasibility of conventional observational methods. Compounding this challenge, the systematic acquisition of large-scale mobility data is strictly bottlenecked by prohibitive costs and stringent privacy regulations. To overcome these fundamental limitations and establish a reliable human trajectory anomalies dataset with annotated ground truth, we introduce a novel, end-to-end generative framework designed to synthesize realistic trajectory anomalies at scale. Our architecture bridges the gap between purely synthetic mobility data and complex real-world physical constraints by operating directly on baseline simulated trajectories. We employ Large Language Model (LLM) agents to systematically inject semantically meaningful behavioral anomalies such as irregular out-of-distribution check-ins and skipped routine visits. To ensure rigorous spatial validity, the system leverages map-constrained routing reconstruction to recalculate the physical transitions between these LLM agent-modified staypoints. Moreover, to narrow the simulation-to-reality gap, we augment the resulting trajectories with a context-aware spatial noise model, parameterized by environmental and location-specific variables, to accurately emulate heterogeneous GPS sensor degradation.

  • 3 authors
·
Jun 8

Lost in Recovery: Demystifying Recovery Behavior of Computer-Use Agents via Goal-Oriented Action Replay

Recent advances in large (vision) language models have enabled computer-use agents that automate digital workflows via fine-grained keyboard and mouse operations. However, such agents remain fragile in long-horizon settings, where errors accumulate and executed actions leave unintended side effects, making the ability to recover from failures critical. Yet, existing remedies remain inadequate: environment resets are infeasible in proprietary settings, action replay is prohibitively expensive over long horizons, and API-based rollback is limited to web environments, leaving model-based recovery largely unexplored. To address this gap, we present ReTrace, a scalable evaluation framework for systematically studying recovery behavior in computer-use agents. We formalize Transition-Consistent Recovery: identical downstream actions from the recovered and target states must yield identical outcomes. We operationalize this criterion through goal-oriented action replay following controlled error injection. Using ReTrace, we present the first systematic study of autonomous, model-based recovery, revealing that (i) ideal recovery can unlock model's latent task completion capabilities, (ii) current computer-use agents fail to exploit their latent recovery capabilities, and (iii) accurate model-based recovery yields measurable end-to-end gains. Together, these findings establish recovery as a fundamental capability for building reliable computer-use agents. Our code and dataset is available at https://github.com/BangProx/ReTRACE.

kaist-ai KAIST AI
·
Oct 19 3

ReLift: Dense 3D Tracking as Lifted Trajectory Repair

Dense 3D tracking from monocular video requires establishing point correspondences over time, estimating their depth, and inferring their trajectories during occlusion. Existing methods typically learn these tasks jointly, a demanding objective given the scarcity of 4D supervision. We show that strong pretrained 2D trackers and 3D geometry models provide an effective foundation: lifted trajectories, with occluded segments simply interpolated, already rival dedicated 3D trackers using the same geometry. However, lifted trajectories inherit correspondence and depth errors, and under occlusion, their depth comes from the occluder rather than the tracked point. We introduce ReLift, an efficient feed-forward framework that recasts dense 3D tracking as geometric trajectory repair and completion. At its core, a trajectory corrector alternates attention along and across trajectories to preserve reliable observations, repair corrupted positions, and complete missing motion. Using only geometric inputs allows us to train directly on 3D trajectories with simulated lifting errors, decoupling training from images and from any specific tracker or geometry model. Concentrating 4D supervision on trajectory refinement yields a reusable model that consistently improves lifted trajectories across trackers and geometry providers without retraining, so it benefits directly from future advances in either component. On WorldTrack, ReLift achieves state-of-the-art mean accuracy, improving on the strongest baselines by 2.1 APD on all points and 3.0 on dynamic points, with faster configurations remaining competitive with leading 3D trackers while running faster than 4RC. Visit our supplementry page for more examples and code.

Leveraging the Spatial Hierarchy: Coarse-to-fine Trajectory Generation via Cascaded Hybrid Diffusion

Urban mobility data has significant connections with economic growth and plays an essential role in various smart-city applications. However, due to privacy concerns and substantial data collection costs, fine-grained human mobility trajectories are difficult to become publicly available on a large scale. A promising solution to address this issue is trajectory synthesizing. However, existing works often ignore the inherent structural complexity of trajectories, unable to handle complicated high-dimensional distributions and generate realistic fine-grained trajectories. In this paper, we propose Cardiff, a coarse-to-fine Cascaded hybrid diffusion-based trajectory synthesizing framework for fine-grained and privacy-preserving mobility generation. By leveraging the hierarchical nature of urban mobility, Cardiff decomposes the generation process into two distinct levels, i.e., discrete road segment-level and continuous fine-grained GPS-level: (i) In the segment-level, to reduce computational costs and redundancy in raw trajectories, we first encode the discrete road segments into low-dimensional latent embeddings and design a diffusion transformer-based latent denoising network for segment-level trajectory synthesis. (ii) Taking the first stage of generation as conditions, we then design a fine-grained GPS-level conditional denoising network with a noise augmentation mechanism to achieve robust and high-fidelity generation. Additionally, the Cardiff framework not only progressively generates high-fidelity trajectories through cascaded denoising but also flexibly enables a tunable balance between privacy preservation and utility. Experimental results on three large real-world trajectory datasets demonstrate that our method outperforms state-of-the-art baselines in various metrics.

  • 5 authors
·
Jul 7, 2025

Learning Individual Dynamics from Sparse Cross-Sectional Snapshots

Predicting how a dynamical unit evolves over time - how an individual ages, an epidemic spreads, or a physical system degrades - typically requires dense longitudinal tracking. When only extremely sparse or entirely cross-sectional data is available, inferring individualized, continuous-time trajectories is fundamentally ill-posed. Existing methods force a strict compromise: sequence models (e.g. latent ODEs) require dense longitudinal data, while cross-sectional methods (e.g. optimal transport, flow matching-based) map aggregate populations, losing individual dynamics. In this paper, we demonstrate that this dichotomy can be broken. We introduce CADENCE, a principled probabilistic framework that recovers continuous individual trajectories from isolated snapshots by anchoring latent dynamics to static, individual-level contexts. We provide novel identifiability guarantees for single-timepoint trajectory inference. By combining a score-based spatial encoder (bijective Probability Flow ODE) to eliminate diffeomorphic ambiguities with a Soft Mixture-of-Experts (SMoE) router, we show that individual dynamical parameters and routing function are jointly identifiable. Across a suite of benchmarks spanning physical systems to real-world biological data, CADENCE, trained strictly on extremely sparse snapshots with context structure, matches or exceeds the performance of state-of-the-art sequential models trained on dense, full-trajectory data.

  • 4 authors
·
May 21

Effective and Efficient Representation Learning for Flight Trajectories

Flight trajectory data plays a vital role in the traffic management community, especially for downstream tasks such as trajectory prediction, flight recognition, and anomaly detection. Existing works often utilize handcrafted features and design models for different tasks individually, which heavily rely on domain expertise and are hard to extend. We argue that different flight analysis tasks share the same useful features of the trajectory. Jointly learning a unified representation for flight trajectories could be beneficial for improving the performance of various tasks. However, flight trajectory representation learning (TRL) faces two primary challenges, \ie unbalanced behavior density and 3D spatial continuity, which disable recent general TRL methods. In this paper, we propose Flight2Vec , a flight-specific representation learning method to address these challenges. Specifically, a behavior-adaptive patching mechanism is used to inspire the learned representation to pay more attention to behavior-dense segments. Moreover, we introduce a motion trend learning technique that guides the model to memorize not only the precise locations, but also the motion trend to generate better representations. Extensive experimental results demonstrate that Flight2Vec significantly improves performance in downstream tasks such as flight trajectory prediction, flight recognition, and anomaly detection.

  • 4 authors
·
Dec 20, 2024

Unify Change Point Detection and Segment Classification in a Regression Task for Transportation Mode Identification

Identifying travelers' transportation modes is important in transportation science and location-based services. It's appealing for researchers to leverage GPS trajectory data to infer transportation modes with the popularity of GPS-enabled devices, e.g., smart phones. Existing studies frame this problem as classification task. The dominant two-stage studies divide the trip into single-one mode segments first and then categorize these segments. The over segmentation strategy and inevitable error propagation bring difficulties to classification stage and make optimizing the whole system hard. The recent one-stage works throw out trajectory segmentation entirely to avoid these by directly conducting point-wise classification for the trip, whereas leaving predictions dis-continuous. To solve above-mentioned problems, inspired by YOLO and SSD in object detection, we propose to reframe change point detection and segment classification as a unified regression task instead of the existing classification task. We directly regress coordinates of change points and classify associated segments. In this way, our method divides the trip into segments under a supervised manner and leverage more contextual information, obtaining predictions with high accuracy and continuity. Two frameworks, TrajYOLO and TrajSSD, are proposed to solve the regression task and various feature extraction backbones are exploited. Exhaustive experiments on GeoLife dataset show that the proposed method has competitive overall identification accuracy of 0.853 when distinguishing five modes: walk, bike, bus, car, train. As for change point detection, our method increases precision at the cost of drop in recall. All codes are available at https://github.com/RadetzkyLi/TrajYOLO-SSD.

  • 2 authors
·
Dec 7, 2023

Trajectory Replay: Continuous-Time Mixture Transport for Lifelong Generative Models

Adapting pre-trained continuous-time generative models to sequentially incoming data without forgetting earlier tasks is a central challenge in lifelong learning. A leading strategy, generative replay, uses a generative model trained on historical tasks to augment its own continual update with synthetic samples from experience. However, it requires full trajectory simulations at every training step, which accumulate discretization errors and can degrade the replayed historical distribution. Here, we propose trajectory replay, which bypasses sample generation by training an updated velocity field to match both a frozen historical velocity along its trajectories and the incoming task's velocity field, weighted by a stability-plasticity coefficient. Through the lens of continuous-time transport, we show the resulting optimum averages the two task velocities by their respective densities and generates the mixture of their probability paths. Combined with mean velocity distillation, trajectory replay accesses historical trajectories using only a few network evaluations per continual update. Empirically, it outperforms generative replay and distillation baselines on class-incremental image generation. In two biological case studies, trajectory replay extends generative perturbation models to new contexts and experimental batches across two data modalities while preserving treatment-effect prediction.

  • 5 authors
·
Oct 18

SWE-Trail: History-Guided Trajectory Collection for Coding Agent Training

Coding agents solve repository issues through long sequences of exploration, editing, and validation. These trajectories are increasingly used as post-training data, so how they are collected shapes what the trained model learns. A common approach is to sample multiple trajectories independently for each issue and then select or curate them. However, as more trajectories are sampled independently, later trajectories become increasingly redundant, even though earlier trajectories could guide where subsequent collection effort should be spent. A natural way to use this history is to expose it to the coding agent as advice. But training on such trajectories can make the model rely on advice that is unavailable at test time, creating a train-test mismatch. Instead, we argue that history should guide where collection effort is spent, while the coding agent decides what to generate. We introduce SWE-Trail, a trajectory collector that uses earlier trajectories to guide subsequent collection while keeping that history outside the coding agent's context. During a new rollout, SWE-Trail uses history to identify a state where additional collection effort may be useful. There, the coding agent proposes candidate next actions from its ordinary context, and SWE-Trail briefly executes them from the same checkpoint to decide which route continues. We evaluate collection approaches by training student models on the trajectories they produce. For a 124B student initialized from Ling-3.0-flash-base, SWE-Trail improves mean resolution over independent sampling by 2.33 and 1.60 percentage points on SWE-bench Multilingual and SWE-bench Pro, respectively. Without history, the same pipeline produces more resolved trajectories than independent sampling, but improves by only 0.11 points on Multilingual. These results show the value of using history to guide collection without exposing it to the coding agent.

antgroup Ant Group
·
Oct 31 1

How Faithful Is Trajectory-Based Data Attribution? Error Sources, Remedies, and Practical Guidelines

Trajectory-based data attribution methods estimate the influence of training samples on model predictions by unrolling the training trajectory. They are widely used in applications such as data selection, data valuation, and model diagnosis, but there is a lack of comprehensive error analysis of these methods, raising concerns about method faithfulness and hindering reliable deployment. In this work, we provide the first systematic analysis of error sources in trajectory-based data attribution, together with concrete remedies to mitigate them and practical guidelines for downstream use. We organize the total error into three categories, config-level, algorithm-level, and system-level. We make three contributions. First, we identify optimizer mismatch as the dominant config-level error: existing methods derive their attribution under the assumption of SGD, even for models trained with the modern de facto optimizer AdamW. We propose AdamW-influence to fully account for AdamW's optimization dynamics, yielding improvements from 10% to over 300% in Spearman correlation between estimated and ground-truth influence across four settings spanning MLP, CNN, GPT-2, and Llama 3.2-1B. Second, we isolate the remaining algorithm-level error arising from the first-order Taylor approximation, identify the learning rate and trajectory length as factors governing the error magnitude, and derive a closed-form error proxy that can be evaluated along the original trajectory without retraining. Third, we translate these insights into practical guidelines for data selection by unifying offline and online strategies under a K-step look-ahead framework. Under this framework, online selection with a short horizon often matches or exceeds offline, and the optimal horizon can be tuned jointly with the learning rate. Together, these results turn the framework into an actionable selection recipe for practitioners.

  • 7 authors
·
May 11

CANTraj: Recovering Vehicle Trajectories from CAN Signals in Naturalistic Driving

Open driving releases and usage-based insurance programs often claim to prevent privacy breaches by omitting GPS records when sharing or collecting vehicle data. However, removing GPS coordinates from driving logs does not erase the location information carried by vehicle signals. While prior route-inference attacks have demonstrated that speed, steering, and driving events can be matched to road networks to reconstruct trajectories, existing studies rely on inconsistent prior assumptions and evaluation metrics and are tested only on small, restricted datasets, making their results difficult to compare and their real-world effectiveness uncertain. We release CANTraj, a naturalistic driving dataset pairing decoded CAN events with time-aligned GNSS trajectories (3,940 drives, 454 drivers), and CANTraj-Bench for evaluating trajectory recovery (3,675 drives, 431 drivers, 1,380 hours, 85,919 km). On 776 evaluation drives from 94 unseen drivers, we compare six re-implemented attacks and benchmark baselines under explicit information-access protocols, paired comparisons, and metrics incorporating failures. Experiments show that combining steering signals with road-network constraints yields the largest gain: With a known start and heading, adding steering to speed raises the online map filter's five-minute route recovery from 56% to 87%, with a median average displacement error of 43 m versus 921 m for map-free dead reckoning. Offline beam search recovers 88% of test routes with the heading and 81% without it. Because methods fail on different windows, we also evaluate an LLM harness that selects among candidate routes on 659 five-minute windows; its best configuration recovers 79% of routes on test and 83% on few-shot, outperforming the best baseline on test and matching it on few-shot. Data and code at huggingface.co/datasets/HenryYHW/CANTraj and github.com/WangYuHang-cmd/GPS--CAN.

MOTIF-Lab MOTIF-LAB
·
Nov 12 2

MAGE: Multi-scale Autoregressive Generation for Offline Reinforcement Learning

Generative models have gained significant traction in offline reinforcement learning (RL) due to their ability to model complex trajectory distributions. However, existing generation-based approaches still struggle with long-horizon tasks characterized by sparse rewards. Some hierarchical generation methods have been developed to mitigate this issue by decomposing the original problem into shorter-horizon subproblems using one policy and generating detailed actions with another. While effective, these methods often overlook the multi-scale temporal structure inherent in trajectories, resulting in suboptimal performance. To overcome these limitations, we propose MAGE, a Multi-scale Autoregressive GEneration-based offline RL method. MAGE incorporates a condition-guided multi-scale autoencoder to learn hierarchical trajectory representations, along with a multi-scale transformer that autoregressively generates trajectory representations from coarse to fine temporal scales. MAGE effectively captures temporal dependencies of trajectories at multiple resolutions. Additionally, a condition-guided decoder is employed to exert precise control over short-term behaviors. Extensive experiments on five offline RL benchmarks against fifteen baseline algorithms show that MAGE successfully integrates multi-scale trajectory modeling with conditional guidance, generating coherent and controllable trajectories in long-horizon sparse-reward settings.

  • 10 authors
·
Feb 27

TrajectoryFormer: 3D Object Tracking Transformer with Predictive Trajectory Hypotheses

3D multi-object tracking (MOT) is vital for many applications including autonomous driving vehicles and service robots. With the commonly used tracking-by-detection paradigm, 3D MOT has made important progress in recent years. However, these methods only use the detection boxes of the current frame to obtain trajectory-box association results, which makes it impossible for the tracker to recover objects missed by the detector. In this paper, we present TrajectoryFormer, a novel point-cloud-based 3D MOT framework. To recover the missed object by detector, we generates multiple trajectory hypotheses with hybrid candidate boxes, including temporally predicted boxes and current-frame detection boxes, for trajectory-box association. The predicted boxes can propagate object's history trajectory information to the current frame and thus the network can tolerate short-term miss detection of the tracked objects. We combine long-term object motion feature and short-term object appearance feature to create per-hypothesis feature embedding, which reduces the computational overhead for spatial-temporal encoding. Additionally, we introduce a Global-Local Interaction Module to conduct information interaction among all hypotheses and models their spatial relations, leading to accurate estimation of hypotheses. Our TrajectoryFormer achieves state-of-the-art performance on the Waymo 3D MOT benchmarks. Code is available at https://github.com/poodarchu/EFG .

  • 8 authors
·
Jun 9, 2023

C4D: 4D Made from 3D through Dual Correspondences

Recovering 4D from monocular video, which jointly estimates dynamic geometry and camera poses, is an inevitably challenging problem. While recent pointmap-based 3D reconstruction methods (e.g., DUSt3R) have made great progress in reconstructing static scenes, directly applying them to dynamic scenes leads to inaccurate results. This discrepancy arises because moving objects violate multi-view geometric constraints, disrupting the reconstruction. To address this, we introduce C4D, a framework that leverages temporal Correspondences to extend existing 3D reconstruction formulation to 4D. Specifically, apart from predicting pointmaps, C4D captures two types of correspondences: short-term optical flow and long-term point tracking. We train a dynamic-aware point tracker that provides additional mobility information, facilitating the estimation of motion masks to separate moving elements from the static background, thus offering more reliable guidance for dynamic scenes. Furthermore, we introduce a set of dynamic scene optimization objectives to recover per-frame 3D geometry and camera parameters. Simultaneously, the correspondences lift 2D trajectories into smooth 3D trajectories, enabling fully integrated 4D reconstruction. Experiments show that our framework achieves complete 4D recovery and demonstrates strong performance across multiple downstream tasks, including depth estimation, camera pose estimation, and point tracking. Project Page: https://littlepure2333.github.io/C4D

  • 4 authors
·
Oct 16, 2025

MOON: Learning When to Forget and How to Move On in Vision-and-Language Navigation

Recent vision-and-language navigation (VLN) policies act on their visual history, and an incorrect action can take them off the instructed route. Paired interventions on four VLN policies show that clearing the history doubles pooled success at the onset of a deviation but lowers it on route, while later in a deviation, removing only the off-route frames helps much less. After a deviation, the retained history keeps the policy from turning where a turn is needed, which we call behavioral inertia. We propose MOON, a framework that equips a frozen VLN policy with two lightweight modules, adding less than 1% of its parameters. A deviation judge decides when to forget, raising an alarm that clears the history when it predicts that the agent is off route. A recovery policy, trained with GRPO from alarm states, learns how to move on, turning more of the successes found only by sampling into a single greedy rollout. Experiments on R2R-CE and RxR-CE show that MOON reaches the highest R2R-CE success rate among the compared methods and raises the success rate of its frozen base by 5.2 and 6.0 points, and an ablation with a random trigger indicates that this gain depends on when the history is cleared. Without retraining, MOON also improves zero-shot object-goal navigation on HM3D-OVON. Together, these results suggest that deviation recovery depends on knowing when to forget, not only how to act. Code is available at https://github.com/AutoLab-SAI-SJTU/MOON.

  • 9 authors
·
Oct 23

Pre-training on Synthetic Driving Data for Trajectory Prediction

Accumulating substantial volumes of real-world driving data proves pivotal in the realm of trajectory forecasting for autonomous driving. Given the heavy reliance of current trajectory forecasting models on data-driven methodologies, we aim to tackle the challenge of learning general trajectory forecasting representations under limited data availability. We propose a pipeline-level solution to mitigate the issue of data scarcity in trajectory forecasting. The solution is composed of two parts: firstly, we adopt HD map augmentation and trajectory synthesis for generating driving data, and then we learn representations by pre-training on them. Specifically, we apply vector transformations to reshape the maps, and then employ a rule-based model to generate trajectories on both original and augmented scenes; thus enlarging the driving data without collecting additional real ones. To foster the learning of general representations within this augmented dataset, we comprehensively explore the different pre-training strategies, including extending the concept of a Masked AutoEncoder (MAE) for trajectory forecasting. Without bells and whistles, our proposed pipeline-level solution is general, simple, yet effective: we conduct extensive experiments to demonstrate the effectiveness of our data expansion and pre-training strategies, which outperform the baseline prediction model by large margins, e.g. 5.04%, 3.84% and 8.30% in terms of MR_6, minADE_6 and minFDE_6. The pre-training dataset and the codes for pre-training and fine-tuning are released at https://github.com/yhli123/Pretraining_on_Synthetic_Driving_Data_for_Trajectory_Prediction.

  • 8 authors
·
Sep 18, 2023

TrajPrism: A Multi-Task Benchmark for Language-Grounded Urban Trajectory Understanding

Urban mobility is naturally expressed both as trajectories in space and as natural-language descriptions of travel intent, constraints, and preferences. However, prior work rarely evaluates these two modalities together on the same real-world trajectories: trajectory modeling often stays geometry-centric, while language-centric mobility benchmarks frequently target route planning and tool use rather than fine-grained, verifiable alignment between text and the underlying route. We introduce TrajPrism, a multi-task benchmark for language-trajectory alignment that unifies (i) instruction-conditioned trajectory generation, (ii) language-driven semantic trajectory retrieval, and (iii) trajectory captioning, together with an evaluation protocol that measures trajectory fidelity, retrieval quality, and language groundedness. We construct TrajPrism by pairing real urban trajectories with judge-filtered language annotations generated under a four-dimensional travel-intent taxonomy. The benchmark contains 300K selected trajectories across Porto, San Francisco, and Beijing, yielding 2.1M task instances from three instruction variants, three retrieval queries, and one caption per trajectory. We further develop proof-of-concept models for each task: TrajAnchor for instruction-conditioned trajectory generation, TrajFuse for semantic trajectory retrieval, and TrajRap for trajectory captioning. These models instantiate the proposed tasks and show that geometry-only trajectory baselines leave a large gap on our protocol, especially where language is part of the input-output interface. We release TrajPrism with code and a reproducible annotation pipeline that is designed to be portable across cities, given compatible trajectory inputs and map resources.

  • 9 authors
·
May 10

Near-Future Policy Optimization

Reinforcement learning with verifiable rewards (RLVR) has become a core post-training recipe. Introducing suitable off-policy trajectories into on-policy exploration accelerates RLVR convergence and raises the performance ceiling, yet finding a source of such trajectories remains the key challenge. Existing mixed-policy methods either import trajectories from external teachers (high-quality but distributionally far) or replay past training trajectories (close but capped in quality), and neither simultaneously satisfies the strong enough (higher Q , more new knowledge to learn) and close enough (lower V , more readily absorbed) conditions required to maximize the effective learning signal S = Q/V. We propose Near-Future Policy Optimization (NPO), a simple mixed-policy scheme that learns from a policy's own near-future self: a later checkpoint from the same training run is a natural source of auxiliary trajectories that is both stronger than the current policy and closer than any external source, directly balancing trajectory quality against variance cost. We validate NPO through two manual interventions, early-stage bootstrapping and late-stage plateau breakthrough, and further propose AutoNPO,an adaptive variant that automatically triggers interventions from online training signals and selects the guide checkpoint that maximizes S. On Qwen3-VL-8B-Instruct with GRPO, NPO improves average performance from 57.88 to 62.84, and AutoNPO pushes it to 63.15, raising the final performance ceiling while accelerating convergence.

  • 9 authors
·
Apr 21 4

STRAP: Robot Sub-Trajectory Retrieval for Augmented Policy Learning

Robot learning is witnessing a significant increase in the size, diversity, and complexity of pre-collected datasets, mirroring trends in domains such as natural language processing and computer vision. Many robot learning methods treat such datasets as multi-task expert data and learn a multi-task, generalist policy by training broadly across them. Notably, while these generalist policies can improve the average performance across many tasks, the performance of generalist policies on any one task is often suboptimal due to negative transfer between partitions of the data, compared to task-specific specialist policies. In this work, we argue for the paradigm of training policies during deployment given the scenarios they encounter: rather than deploying pre-trained policies to unseen problems in a zero-shot manner, we non-parametrically retrieve and train models directly on relevant data at test time. Furthermore, we show that many robotics tasks share considerable amounts of low-level behaviors and that retrieval at the "sub"-trajectory granularity enables significantly improved data utilization, generalization, and robustness in adapting policies to novel problems. In contrast, existing full-trajectory retrieval methods tend to underutilize the data and miss out on shared cross-task content. This work proposes STRAP, a technique for leveraging pre-trained vision foundation models and dynamic time warping to retrieve sub-sequences of trajectories from large training corpora in a robust fashion. STRAP outperforms both prior retrieval algorithms and multi-task learning methods in simulated and real experiments, showing the ability to scale to much larger offline datasets in the real world as well as the ability to learn robust control policies with just a handful of real-world demonstrations.

  • 5 authors
·
Aug 17, 2025

RESPLE2: Inertial-Informed Recursive Non-Uniform Spline Estimation for Multi-Sensor Odometry with Global Refinement

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update step further incorporates heterogeneous sensor measurements at their native timestamps through continuous-time observation models, supporting flexible combinations of LiDARs, cameras, inertial measurement units, and leg kinematics. We further develop a lightweight global optimization module that directly refines non-uniform B-spline control points by incorporating loop-closure constraints derived from LiDAR-visual cues. We conduct extensive evaluations on public and experimental datasets across handheld, tracked, legged, and hybrid aerial-legged platforms, covering highly dynamic maneuvers with extreme accelerations. Compared with state-of-the-art multi-sensor odometry systems, RESPLE2 achieves competitive or superior estimation accuracy and robustness in the corresponding sensor configurations, particularly under aggressive motion, while maintaining real-time operation. We publicly release our code and experimental datasets at https://github.com/ASIG-X/RESPLE2.

  • 7 authors
·
Oct 26

Deep Stochastic Kinematic Models for Probabilistic Motion Forecasting in Traffic

In trajectory forecasting tasks for traffic, future output trajectories can be computed by advancing the ego vehicle's state with predicted actions according to a kinematics model. By unrolling predicted trajectories via time integration and models of kinematic dynamics, predicted trajectories should not only be kinematically feasible but also relate uncertainty from one timestep to the next. While current works in probabilistic prediction do incorporate kinematic priors for mean trajectory prediction, variance is often left as a learnable parameter, despite uncertainty in one time step being inextricably tied to uncertainty in the previous time step. In this paper, we show simple and differentiable analytical approximations describing the relationship between variance at one timestep and that at the next with the kinematic bicycle model. These approximations can be easily incorporated with negligible additional overhead into any existing trajectory forecasting framework utilizing probabilistic predictions, whether it is autoregressive or one-shot prediction. In our results, we find that encoding the relationship between variance across timesteps works especially well in unoptimal settings, such as with small or noisy datasets. We observe up to a 50% performance boost in partial dataset settings and up to an 8% performance boost in large-scale learning compared to previous kinematic prediction methods on SOTA trajectory forecasting architectures out-of-the-box, with no fine-tuning. In this paper, we show four analytical formulations of probabilistic kinematic priors which can be used for any Gaussian Mixture Model (GMM)-based deep learning models, quantify the error bound on linear approximations applied during trajectory unrolling, and show results to evaluate each formulation in trajectory forecasting.

  • 6 authors
·
Jun 3, 2024

FC-SWE: Failure-Conditioned RL for Long-Horizon Software Engineering Agents

Repository-level software engineering (SWE) is a challenging long-horizon setting: agents must reason over extended interactions, use tools, and adapt to stateful environments. Recent work trains SWE agents with reinforcement learning methods such as Group Relative Policy Optimization (GRPO), which independently sample multiple trajectories per issue, test the resulting patches, and compare terminal rewards within a fixed group. However, this training setup does not reuse verifier feedback from failed patches as context for subsequent attempts, even though this feedback contains valuable diagnostic information about what went wrong. Training on recovery trajectories is challenging because the preceding outcome determines whether the next trajectory is generated, while the failed execution determines its conditioning context. We introduce FC-SWE, a failure-conditioned RL framework that incorporates recovery attempts into policy training. After a patch fails verification, FC-SWE restores the repository to its original task state and uses the failed patch and verifier feedback as context for a recovery trajectory. FC-SWE adapts GRPO to these chains of complete, multi-turn tool-use trajectories through two mechanisms. Trajectory-local rewards preserve each attempt's verifier outcome, preventing recovery success from rewarding an earlier failed patch. Active-set advantage estimation forms a comparison group from all initial and recovery trajectories actually executed for the same issue, so failed attempts remain in the group while unexecuted attempts are excluded. On all 500 SWE-bench Verified tasks under a verifier-assisted protocol, FC-SWE with Qwen3.5-4B and SWE-agent achieves 41.7% Resolved@1 and 52.8% Resolved@2, compared with 38.9% and 48.5% for GRPO. Although trained with at most two attempts per chain, FC-SWE reaches 70.7% Resolved@11 under an eleven-attempt test-time budget.

nvidia NVIDIA
·
Oct 5 3

UniTE: A Survey and Unified Pipeline for Pre-training Spatiotemporal Trajectory Embeddings

Spatiotemporal trajectories are sequences of timestamped locations, which enable a variety of analyses that in turn enable important real-world applications. It is common to map trajectories to vectors, called embeddings, before subsequent analyses. Thus, the qualities of embeddings are very important. Methods for pre-training embeddings, which leverage unlabeled trajectories for training universal embeddings, have shown promising applicability across different tasks, thus attracting considerable interest. However, research progress on this topic faces two key challenges: a lack of a comprehensive overview of existing methods, resulting in several related methods not being well-recognized, and the absence of a unified pipeline, complicating the development of new methods and the analysis of methods. We present UniTE, a survey and a unified pipeline for this domain. In doing so, we present a comprehensive list of existing methods for pre-training trajectory embeddings, which includes methods that either explicitly or implicitly employ pre-training techniques. Further, we present a unified and modular pipeline with publicly available underlying code, simplifying the process of constructing and evaluating methods for pre-training trajectory embeddings. Additionally, we contribute a selection of experimental results using the proposed pipeline on real-world datasets. Implementation of the pipeline is publicly available at https://github.com/Logan-Lin/UniTE.

  • 11 authors
·
Nov 11, 2024

A Third-Order Gaussian Process Trajectory Representation Framework with Closed-Form Kinematics for Continuous-Time Motion Estimation

In this paper, we propose a third-order, i.e., white-noise-on-jerk, Gaussian Process (GP) Trajectory Representation (TR) framework for continuous-time (CT) motion estimation (ME) tasks. Our framework features a unified trajectory representation that encapsulates the kinematic models of both SO(3)timesR^3 and SE(3) pose representations. This encapsulation strategy allows users to use the same implementation of measurement-based factors for either choice of pose representation, which facilitates experimentation and comparison to achieve the best model for the ME task. In addition, unique to our framework, we derive the kinematic models with the closed-form temporal derivatives of the local variable of SO(3) and SE(3), which so far has only been approximated based on the Taylor expansion in the literature. Our experiments show that these kinematic models can improve the estimation accuracy in high-speed scenarios. All analytical Jacobians of the interpolated states with respect to the support states of the trajectory representation, as well as the motion prior factors, are also provided for accelerated Gauss-Newton (GN) optimization. Our experiments demonstrate the efficacy and efficiency of the framework in various motion estimation tasks such as localization, calibration, and odometry, facilitating fast prototyping for ME researchers. We release the source code for the benefit of the community. Our project is available at https://github.com/brytsknguyen/gptr.

  • 8 authors
·
Oct 30, 2024

Are Frontier VLM Agents Ready to Be Robot Generalists? An Empirical Study with the Embodied Agent Arena

A robot generalist must interpret a scene, act on it, and satisfy every condition of a task. How far do frontier vision-language models (VLMs) meet these demands? We introduce Embodied Agent Arena, evaluating ten VLM agents across Geometry, Spatial Reasoning, Affordance, Task Planning, and Manipulation. Its 1,000 cases combine 32 established sources with GeoProbe, our 168-case benchmark for camera, motion, depth, and scale estimation. A minimal harness leaves task decisions to the model through source-native interfaces. Closed-weight models lead all five domains, whereas open-weight VLMs show useful spatial reasoning but substantially lower planning and manipulation success. Beneath these averages, similar geometric errors conceal different scale and shape distortions, and valid region estimates need not identify usable action points. During execution, agents can achieve early subgoals yet lose object control, bind an action to the wrong receiving region, or stop before the required physical state holds. Additional computation does not uniformly resolve these failures: code repair can restore execution without completing the task, while self-review can reverse correct judgments. Failure costs also differ: the strongest planners concentrate failed-token expenditure in prolonged body-control tasks, whereas other models fail broadly across procedures. Matched traces show how successful recovery uses feedback to restore a missing prerequisite and advance the remaining task.

  • 10 authors
·
Oct 22 2

PRG-Fusion: Orchestrating Generative Priors with Reconstruction Evidence for Driving View Synthesis

Synthesizing photorealistic driving videos along specified trajectories is essential for scalable closed-loop simulation. Reconstruction-based methods leverage neural rendering to synthesize geometrically consistent views, but often exhibit diverse artifacts and missing content when the viewpoint deviates from the training trajectory. In contrast, generative models can synthesize realistic views along arbitrary trajectories from vehicle sensor data, yet often struggle to maintain temporal and geometric consistency across frames. To combine the strengths of both, we propose PRG-Fusion, a framework for driving view synthesis that uses reconstruction evidence to orchestrate generative priors across regions. Specifically, we extract region-wise degradation evidence from reconstructed driving scenes and convert it into Preserve, Repair, and Generate (PRG) labels. At inference, these labels serve as a unified routing policy for region-aware spatiotemporal synthesis, orchestrating 3DGS appearance preservation, LiDAR-guided structural correction, and video-prior-driven content completion across Preserve, Repair, and Generate regions, respectively. We then follow a two-stage training paradigm, first establish geometric control from sparse LiDAR projections and subsequently learning appearance control from dense 3DGS renderings. Extensive experiments on Waymo demonstrate that PRG-Fusion achieves state-of-the-art overall performance in novel trajectory video synthesis, with superior visual quality and geometric fidelity while maintaining competitive view consistency under large trajectory shifts.

  • 5 authors
·
Sep 6

SelfLift: Accelerating Few-Step Diffusion via Self-Recovering Resolution Transition

Few-step diffusion models substantially compress temporal computation, making the spatial cost of each model evaluation an increasingly dominant source of inference latency. Progressive-resolution inference reduces this cost by performing early denoising at low resolution and reserving high-resolution computation for refinement. However, existing methods typically lift intermediate latents directly and rely on subsequent steps to absorb the induced distribution mismatch. In the few-step regime, the limited recovery budget leaves these errors as visible artifacts, constraining how late the transition can occur and, consequently, how efficiently it can be performed. We introduce SelfLift, a self-recovering progressive-resolution framework that derives both transition-repair signals and trajectory-aligned supervision from the generative model itself. SelfLift-zero proposes a training-free Artifact-Aware Consistency Lift, using disagreement between direct latent lifting and pixel-VAE re-encoding as both a localized artifact-risk signal and a model-native correction direction. It enables reliable late transitions without external super-resolution, extra denoiser evaluations, or sampling-schedule modifications. Building on this robust transition, SelfLift-rich performs On-Policy Self Recovery on student-visited states, transferring dense high-resolution guidance from an internal self-teacher while remaining aligned with the altered progressive-resolution dynamics. Across FLUX.2-Klein and Z-Image-Turbo, SelfLift reduces end-to-end latency by 41.5% and 44.1%, respectively. Combined with timestep distillation, it delivers overall speedups of 29.61x and 19.21x over the corresponding 50-step models while preserving competitive generation quality, establishing a stronger speed-quality frontier for few-step diffusion.

  • 7 authors
·
Sep 15

PAS3R: Pose-Adaptive Streaming 3D Reconstruction for Long Video Sequences

Online monocular 3D reconstruction enables dense scene recovery from streaming video but remains fundamentally limited by the stability-adaptation dilemma: the reconstruction model must rapidly incorporate novel viewpoints while preserving previously accumulated scene structure. Existing streaming approaches rely on uniform or attention-based update mechanisms that often fail to account for abrupt viewpoint transitions, leading to trajectory drift and geometric inconsistencies over long sequences. We introduce PAS3R, a pose-adaptive streaming reconstruction framework that dynamically modulates state updates according to camera motion and scene structure. Our key insight is that frames contributing significant geometric novelty should exert stronger influence on the reconstruction state, while frames with minor viewpoint variation should prioritize preserving historical context. PAS3R operationalizes this principle through a motion-aware update mechanism that jointly leverages inter-frame pose variation and image frequency cues to estimate frame importance. To further stabilize long-horizon reconstruction, we introduce trajectory-consistent training objectives that incorporate relative pose constraints and acceleration regularization. A lightweight online stabilization module further suppresses high-frequency trajectory jitter and geometric artifacts without increasing memory consumption. Extensive experiments across multiple benchmarks demonstrate that PAS3R significantly improves trajectory accuracy, depth estimation, and point cloud reconstruction quality in long video sequences while maintaining competitive performance on shorter sequences.

  • 4 authors
·
Mar 21

TT4D: A Pipeline and Dataset for Table Tennis 4D Reconstruction From Monocular Videos

We present TT4D, a large-scale, high-fidelity table tennis dataset. It provides 140+ hours of reconstructed singles and doubles gameplay from monocular broadcast videos, featuring multimodal annotations like high-quality camera calibrations, precise 3D ball positions, ball spin, time segmentation, and 3D human meshes over time. This rich data provides a new foundation for virtual replay, in-depth player analysis, and robot learning. The dataset's combination of scale and precision is achieved through a novel reconstruction pipeline. Prior methods first partition a game sequence into individual shot segments based on the 2D ball track, and only then attempt reconstruction. However, 2D-based time segmentation collapses under occlusion and varied camera viewpoints, preventing reliable reconstruction. We invert this paradigm by first lifting the entire unsegmented 2D ball track to 3D through a learned lifting network. This 3D trajectory then allows us to reliably perform time segmentation. The learned lifting network also infers the ball's spin, handles unreliable ball detections, and successfully reconstructs the ball trajectory in cases of high occlusion. This lift-first design is necessary, as our pipeline is the only method capable of reconstructing table tennis gameplay from general-view broadcast monocular videos. We demonstrate the dataset's fidelity through two downstream tasks: estimating the racket's pose \& velocity at impact, and training a generative model of competitive rallies.

OOSTraj: Out-of-Sight Trajectory Prediction With Vision-Positioning Denoising

Trajectory prediction is fundamental in computer vision and autonomous driving, particularly for understanding pedestrian behavior and enabling proactive decision-making. Existing approaches in this field often assume precise and complete observational data, neglecting the challenges associated with out-of-view objects and the noise inherent in sensor data due to limited camera range, physical obstructions, and the absence of ground truth for denoised sensor data. Such oversights are critical safety concerns, as they can result in missing essential, non-visible objects. To bridge this gap, we present a novel method for out-of-sight trajectory prediction that leverages a vision-positioning technique. Our approach denoises noisy sensor observations in an unsupervised manner and precisely maps sensor-based trajectories of out-of-sight objects into visual trajectories. This method has demonstrated state-of-the-art performance in out-of-sight noisy sensor trajectory denoising and prediction on the Vi-Fi and JRDB datasets. By enhancing trajectory prediction accuracy and addressing the challenges of out-of-sight objects, our work significantly contributes to improving the safety and reliability of autonomous driving in complex environments. Our work represents the first initiative towards Out-Of-Sight Trajectory prediction (OOSTraj), setting a new benchmark for future research. The code is available at https://github.com/Hai-chao-Zhang/OOSTraj.

  • 5 authors
·
Apr 2, 2024

SingularTrajectory: Universal Trajectory Predictor Using Diffusion Model

There are five types of trajectory prediction tasks: deterministic, stochastic, domain adaptation, momentary observation, and few-shot. These associated tasks are defined by various factors, such as the length of input paths, data split and pre-processing methods. Interestingly, even though they commonly take sequential coordinates of observations as input and infer future paths in the same coordinates as output, designing specialized architectures for each task is still necessary. For the other task, generality issues can lead to sub-optimal performances. In this paper, we propose SingularTrajectory, a diffusion-based universal trajectory prediction framework to reduce the performance gap across the five tasks. The core of SingularTrajectory is to unify a variety of human dynamics representations on the associated tasks. To do this, we first build a Singular space to project all types of motion patterns from each task into one embedding space. We next propose an adaptive anchor working in the Singular space. Unlike traditional fixed anchor methods that sometimes yield unacceptable paths, our adaptive anchor enables correct anchors, which are put into a wrong location, based on a traversability map. Finally, we adopt a diffusion-based predictor to further enhance the prototype paths using a cascaded denoising process. Our unified framework ensures the generality across various benchmark settings such as input modality, and trajectory lengths. Extensive experiments on five public benchmarks demonstrate that SingularTrajectory substantially outperforms existing models, highlighting its effectiveness in estimating general dynamics of human movements. Code is publicly available at https://github.com/inhwanbae/SingularTrajectory .

  • 3 authors
·
Mar 27, 2024 1

Identifiable World Models from Pretrained Diffusion Representations

Diffusion-based world models can generate and predict trajectories in high-dimensional dynamical systems, but predictive accuracy does not imply that their latent coordinates recover the underlying state variables or causal interactions. We ask whether a frozen pretrained diffusion model can be equipped with identifiable coordinates without retraining its generative backbone. We show that auxiliary-variable nonlinear ICA guarantees can be transferred to Contrastive Diffusion Alignment (ConDA), which learns only a lightweight alignment map on top of frozen diffusion latents. Under standard TCL/GCL assumptions, the aligned representation identifies latent dynamical states up to permutation and componentwise invertible transformations, preserves the latent dynamic structural causal model, and reduces lagged graph recovery to transition-Jacobian sparsity. We evaluate TCL-, GCL-, and CEBRA-based ConDA against TDRL, CaRiNG, IDOL, temporal SuaVE, and iVAE across physical and robotic video systems. TCL and GCL achieve near-perfect blockwise state recovery and competitive lagged graph recovery, including exact recovery in a simulated falling-body system. In a simulated bipedal robot, learned dynamics recover the sign and temporal structure of responses to held-out control perturbations. These results show that a frozen generative diffusion model can be equipped with coordinates that are identifiable, structurally interpretable, and useful for analyzing intervention-relevant dynamics.

  • 3 authors
·
Oct 3

MotIF: Motion Instruction Fine-tuning

While success in many robotics tasks can be determined by only observing the final state and how it differs from the initial state - e.g., if an apple is picked up - many tasks require observing the full motion of the robot to correctly determine success. For example, brushing hair requires repeated strokes that correspond to the contours and type of hair. Prior works often use off-the-shelf vision-language models (VLMs) as success detectors; however, when success depends on the full trajectory, VLMs struggle to make correct judgments for two reasons. First, modern VLMs are trained only on single frames, and cannot capture changes over a full trajectory. Second, even if we provide state-of-the-art VLMs with an aggregate input of multiple frames, they still fail to detect success due to a lack of robot data. Our key idea is to fine-tune VLMs using abstract representations that are able to capture trajectory-level information such as the path the robot takes by overlaying keypoint trajectories on the final image. We propose motion instruction fine-tuning (MotIF), a method that fine-tunes VLMs using the aforementioned abstract representations to semantically ground the robot's behavior in the environment. To benchmark and fine-tune VLMs for robotic motion understanding, we introduce the MotIF-1K dataset containing 653 human and 369 robot demonstrations across 13 task categories. MotIF assesses the success of robot motion given the image observation of the trajectory, task instruction, and motion description. Our model significantly outperforms state-of-the-art VLMs by at least twice in precision and 56.1% in recall, generalizing across unseen motions, tasks, and environments. Finally, we demonstrate practical applications of MotIF in refining and terminating robot planning, and ranking trajectories on how they align with task and motion descriptions. Project page: https://motif-1k.github.io

  • 4 authors
·
Sep 15, 2024

RIVO: Lightweight Adaptive Rerouting for Deep Research Agents

Deep Research agents rely on long-horizon reasoning and iterative tool use to solve complex information-seeking tasks. However, adaptive decision-making over these trajectories remains challenging, as agents may stop prematurely when further evidence is needed, continue unnecessarily after sufficient evidence has been gathered, or fail to redirect unproductive trajectories. Existing solutions either require costly model retraining and dense turn-level supervision, or rely on heuristic control rules that are not directly optimized for downstream research utility. This motivates a lightweight, utility-aware alternative for Deep Research control. We formulate adaptive rerouting in long-horizon Deep Research as a state-conditioned trajectory correction problem. Based on this view, we introduce RIVO, a lightweight plug-in framework for adaptive trajectory correction. The agent estimates its research state from lightweight signals and determines whether trajectory redirection is needed. Once triggered, the plug-in modifies the Host token logits to steer generation toward a more promising research direction. Theoretical analysis shows that, under a value-alignment condition and bounded local curvature, a sufficiently small logit intervention can locally improve expected downstream research utility. We further construct BrowseCore, a curated dataset with a paired local corpus, for efficient and controlled Deep Research experimentation. Building on this resource, the plug-in is trained from downstream outcomes, enabling it to learn corrections that improve subsequent research and final task performance. Extensive experiments across multiple Deep Research benchmarks and control settings demonstrate the effectiveness of our method, showing that lightweight logit intervention can improve long-horizon research without retraining the underlying Host model.

  • 3 authors
·
Oct 10

TrackNetV5: Residual-Driven Spatio-Temporal Refinement and Motion Direction Decoupling for Fast Object Tracking

The TrackNet series has established a strong baseline for fast-moving small object tracking in sports. However, existing iterations face significant limitations: V1-V3 struggle with occlusions due to a reliance on purely visual cues, while TrackNetV4, despite introducing motion inputs, suffers from directional ambiguity as its absolute difference method discards motion polarity. To overcome these bottlenecks, we propose TrackNetV5, a robust architecture integrating two novel mechanisms. First, to recover lost directional priors, we introduce the Motion Direction Decoupling (MDD) module. Unlike V4, MDD decomposes temporal dynamics into signed polarity fields, explicitly encoding both movement occurrence and trajectory direction. Second, we propose the Residual-Driven Spatio-Temporal Refinement (R-STR) head. Operating on a coarse-to-fine paradigm, this Transformer-based module leverages factorized spatio-temporal contexts to estimate a corrective residual, effectively recovering occluded targets. Extensive experiments on the TrackNetV2 dataset demonstrate that TrackNetV5 achieves a new state-of-the-art F1-score of 0.9859 and an accuracy of 0.9733, significantly outperforming previous versions. Notably, this performance leap is achieved with a marginal 3.7% increase in FLOPs compared to V4, maintaining real-time inference capabilities while delivering superior tracking precision.

  • 5 authors
·
Jan 12

EgoRecovery: Acquiring Failure Recovery Ability Through Human Recovery Demonstration

Robust embodied robots should be able to recover from failures and retry tasks in order to operate reliably in unstructured and noisy real-world environments. Achieving this capability requires training policies on data that captures recovery behaviors. However, collecting such data through robot teleoperation is difficult to scale, as it is time-consuming to induce diverse failure states, perform corrective actions, and reset the environment. This challenge is further exacerbated by the high diversity of failure modes, which demands substantially more recovery data than success demonstrations. In this work, we show that egocentric human data capturing failure recovery processes provides a scalable alternative. By efficiently arranging task-level failure configurations and recording short recovery segments, human operators can generate more than 10x as much valid recovery data per hour compared to robot teleoperation under our protocol. To address the embodiment gap between human and robot, we propose EgoRecovery, a co-training framework for learning recovery behavior, where human recovery demonstrations are aligned to a compact corrective-intent space shared with robot data, which captures the timing and magnitude of correction. Only a small number of robot recovery demonstrations are required to connect this intent to executable robot actions. At deployment, a learned recovery gate predicts when correction is needed from robot observations and activates the corrective intent only in recovery states. Experiments on real-world recovery tasks show that EgoRecovery improves success from failure starts over robot-only recovery, direct co-training with human recovery data, and direct intent-transfer baselines.

  • 11 authors
·
Jul 22

Diffusion Models as Optimizers for Efficient Planning in Offline RL

Diffusion models have shown strong competitiveness in offline reinforcement learning tasks by formulating decision-making as sequential generation. However, the practicality of these methods is limited due to the lengthy inference processes they require. In this paper, we address this problem by decomposing the sampling process of diffusion models into two decoupled subprocesses: 1) generating a feasible trajectory, which is a time-consuming process, and 2) optimizing the trajectory. With this decomposition approach, we are able to partially separate efficiency and quality factors, enabling us to simultaneously gain efficiency advantages and ensure quality assurance. We propose the Trajectory Diffuser, which utilizes a faster autoregressive model to handle the generation of feasible trajectories while retaining the trajectory optimization process of diffusion models. This allows us to achieve more efficient planning without sacrificing capability. To evaluate the effectiveness and efficiency of the Trajectory Diffuser, we conduct experiments on the D4RL benchmarks. The results demonstrate that our method achieves it 3-it 10 times faster inference speed compared to previous sequence modeling methods, while also outperforming them in terms of overall performance. https://github.com/RenMing-Huang/TrajectoryDiffuser Keywords: Reinforcement Learning and Efficient Planning and Diffusion Model

  • 7 authors
·
Jul 22, 2024

When Does Trajectory-Level Supervision Permit Efficient Offline Reinforcement Learning?

Offline reinforcement learning is typically analyzed under process-level reward supervision, yet many sequential decision datasets record only trajectory-level outcomes. We develop a statistical theory for offline policy optimization from such outcome-level supervision. We first study the canonical setting where the target remains the expected cumulative reward, but each offline trajectory provides only a scalar label whose conditional mean is the cumulative return. We propose OPAC, a pessimistic actor-critic algorithm that learns a latent reward model and optimizes a policy from trajectory-level labels. We prove a high-probability guarantee of order widetilde O(H^2C_{sa(π^star)/n}) and a matching lower bound, characterizing the sharp statistical cost of replacing process-level rewards with one trajectory-level label. We then extend the principle to preference-based feedback, preserving the leading horizon and concentrability dependence up to preference-model constants. Finally, we study generalized outcome-based offline RL, where both the supervision and the objective are trajectory-level quantities induced by a nonlinear aggregation of latent per-step rewards. This problem is not learnable in general: for all-success objectives, any offline learner may require Ω(2^H) trajectories even with deterministic transitions and constant concentrability. We then identify a tractable regime through two structural coefficients, κ_μ(σ) and χ_μ(σ), capturing information loss in outcome aggregation and generalized Bellman updates, under which generalized OPAC achieves polynomial sample complexity. Together, our results delineate when outcome-level supervision enables sample-efficient offline control and when missing process-level rewards create fundamental statistical barriers.

Lyra 2.0: Explorable Generative 3D Worlds

Recent advances in video generation enable a new paradigm for 3D scene creation: generating camera-controlled videos that simulate scene walkthroughs, then lifting them to 3D via feed-forward reconstruction techniques. This generative reconstruction approach combines the visual fidelity and creative capacity of video models with 3D outputs ready for real-time rendering and simulation. Scaling to large, complex environments requires 3D-consistent video generation over long camera trajectories with large viewpoint changes and location revisits, a setting where current video models degrade quickly. Existing methods for long-horizon generation are fundamentally limited by two forms of degradation: spatial forgetting and temporal drifting. As exploration proceeds, previously observed regions fall outside the model's temporal context, forcing the model to hallucinate structures when revisited. Meanwhile, autoregressive generation accumulates small synthesis errors over time, gradually distorting scene appearance and geometry. We present Lyra 2.0, a framework for generating persistent, explorable 3D worlds at scale. To address spatial forgetting, we maintain per-frame 3D geometry and use it solely for information routing -- retrieving relevant past frames and establishing dense correspondences with the target viewpoints -- while relying on the generative prior for appearance synthesis. To address temporal drifting, we train with self-augmented histories that expose the model to its own degraded outputs, teaching it to correct drift rather than propagate it. Together, these enable substantially longer and 3D-consistent video trajectories, which we leverage to fine-tune feed-forward reconstruction models that reliably recover high-quality 3D scenes.

nvidia NVIDIA
·
Apr 13 4

Manifold4D: Denoising on Point Cloud Rendered Manifolds for Video Re-shooting

Video re-shooting re-renders a monocular video of a dynamic scene along a user-specified camera trajectory, and the dominant recipe supplies the target geometry explicitly: per-frame depth lifts the source video into a 4D point cloud, which is rasterized along the trajectory into a point cloud render. Because the render and the source video are both handed to the network as visual conditions, they compete at every denoising step, leaving the model with a trust dilemma --- how much of the render to believe --- which can degrade trajectory control or visual quality on data outside the training distribution. We argue that a render already pixel-aligned with the target view does not need to be supplied as an explicit conditioning stream at all. We propose MANIFOLD4D, which injects the render directly into the initial noise of flow matching, so that generation no longer departs from standard Gaussian noise but from a new noise manifold carrying geometric information, leaving the source video as the only visual condition. The render is thus used exactly once, and the network is never asked to learn how to read it; in subsequent denoising steps the model can focus on the source video. On our DAVIS-Traj benchmark and on the Vista4D evaluation set, MANIFOLD4D attains the best camera-control accuracy on every metric, lowering rotation error by 25% and 27% and translation error by up to 32% over the strongest baseline, while matching it in video fidelity and leading on real-world novel-view photometric quality. In a user study, our method achieves clear advantages in trajectory following and dynamic consistency. The gap widens as the yaw amplitude grows past the training range, and the model still recovers correct dynamic motion from the source video when the render is deliberately corrupted, confirming that the geometric prior guides generation without overriding it.

  • 6 authors
·
Aug 27

Improving Robotic Imitation Learning via Trajectory Standardization

Imitation learning for robotic manipulation relies on large sets of human demonstration trajectories, which are often noisy and temporally irregular due to variable operator speed, intermittent pauses, and inconsistent action density. A common preprocessing strategy is time-uniform downsampling to shorten sequences, but it cannot effectively remove speed-induced non-uniformity or redundant pauses. This mismatch degrades data quality and hinders policy learning. To address this issue, we propose Information-Standardized Trajectory Resampling (ISR), an offline preprocessing method for effective imitation learning. ISR resamples each trajectory by enforcing approximately equal information distance between adjacent points. Specifically, we map trajectories onto an information-modulated Riemannian manifold and perform geodesic-equidistant parameterization. We construct an information-intensity field from velocity and acceleration norms: the velocity term removes small-motion redundancy, while the acceleration term preserves high-curvature and fine-manipulation phases. We evaluate ISR on three real-world manipulation tasks with mainstream imitation learning policies. Compared with the baseline time-uniform 3x downsampling, ISR improves task success rates by about 25%, remains robust across datasets collected from different operators, and reduces both dataset size and training cost. The code and videos are publicly available at https://d-robotics-ai-lab.github.io/isr.page.

  • 7 authors
·
Jun 21

Particle Trajectory Representation Learning with Masked Point Modeling

Effective self-supervised learning (SSL) techniques have been key to unlocking large datasets for representation learning. While many promising methods have been developed using online corpora and captioned photographs, their application to scientific domains, where data encodes highly specialized knowledge, remains a challenge. Liquid Argon Time Projection Chambers (LArTPCs) provide high-resolution 3D imaging for fundamental physics, but analysis of their sparse, complex point cloud data often relies on supervised methods trained on large simulations, introducing potential biases. We introduce the Point-based Liquid Argon Masked Autoencoder (PoLAr-MAE), applying masked point modeling to unlabeled LArTPC images using domain-specific volumetric tokenization and energy prediction. We show this SSL approach learns physically meaningful trajectory representations directly from data. This yields remarkable data efficiency: fine-tuning on just 100 labeled events achieves track/shower semantic segmentation performance comparable to the state-of-the-art supervised baseline trained on >100,000 events. Furthermore, internal attention maps exhibit emergent instance segmentation of particle trajectories. While challenges remain, particularly for fine-grained features, we make concrete SSL's potential for building a foundation model for LArTPC image analysis capable of serving as a common base for all data reconstruction tasks. To facilitate further progress, we release PILArNet-M, a large dataset of 1M LArTPC events. Project site: https://youngsm.com/polarmae.

  • 3 authors
·
Feb 4, 2025

SEE4D: Pose-Free 4D Generation via Auto-Regressive Video Inpainting

Immersive applications call for synthesizing spatiotemporal 4D content from casual videos without costly 3D supervision. Existing video-to-4D methods typically rely on manually annotated camera poses, which are labor-intensive and brittle for in-the-wild footage. Recent warp-then-inpaint approaches mitigate the need for pose labels by warping input frames along a novel camera trajectory and using an inpainting model to fill missing regions, thereby depicting the 4D scene from diverse viewpoints. However, this trajectory-to-trajectory formulation often entangles camera motion with scene dynamics and complicates both modeling and inference. We introduce SEE4D, a pose-free, trajectory-to-camera framework that replaces explicit trajectory prediction with rendering to a bank of fixed virtual cameras, thereby separating camera control from scene modeling. A view-conditional video inpainting model is trained to learn a robust geometry prior by denoising realistically synthesized warped images and to inpaint occluded or missing regions across virtual viewpoints, eliminating the need for explicit 3D annotations. Building on this inpainting core, we design a spatiotemporal autoregressive inference pipeline that traverses virtual-camera splines and extends videos with overlapping windows, enabling coherent generation at bounded per-step complexity. We validate See4D on cross-view video generation and sparse reconstruction benchmarks. Across quantitative metrics and qualitative assessments, our method achieves superior generalization and improved performance relative to pose- or trajectory-conditioned baselines, advancing practical 4D world modeling from casual videos.

  • 11 authors
·
Oct 30, 2025

FlowHMR: Physically Plausible Motion Capture from Video

We present FlowHMR, a framework for recovering physically plausible global 3D human motion from monocular video. Previous learning-based methods typically regress human motion directly from video and train the network with geometric supervision. However, recovering human motion from monocular video is inherently ambiguous in depth, and direct regression tends to collapse toward an averaged solution. Moreover, the recovered motions are not guaranteed to be physically plausible, so physics-based tracking of them often fails. To address these challenges, we formulate video motion capture as a video-conditioned motion generation problem and first pretrain a flow matching model for this task. Given an input video, the pretrained model generates diverse motion candidates, but not all of them are faithful to the video or physically trackable. We therefore post-train the model using Group Relative Policy Optimization (GRPO) with two rewards. A fidelity reward encourages consistency with the input video. A tracking reward favors motions that a physics-based controller can track successfully. Together, these rewards shift the model's output preference, so the post-trained model stays faithful to the input video while producing more physically plausible motion. We further introduce Wild-4K, a large and diverse dataset of about 4K internet videos, for evaluating human motion recovery in the wild. Qualitative and quantitative experiments on Wild-4K show that our method outperforms state-of-the-art methods in overall motion fidelity and achieves a physical tracking success rate of 82.47%, compared with 62.82% for the strongest baseline, GVHMR.

  • 11 authors
·
Oct 1

'Explaining RL Decisions with Trajectories': A Reproducibility Study

This work investigates the reproducibility of the paper 'Explaining RL decisions with trajectories'. The original paper introduces a novel approach in explainable reinforcement learning based on the attribution decisions of an agent to specific clusters of trajectories encountered during training. We verify the main claims from the paper, which state that (i) training on less trajectories induces a lower initial state value, (ii) trajectories in a cluster present similar high-level patterns, (iii) distant trajectories influence the decision of an agent, and (iv) humans correctly identify the attributed trajectories to the decision of the agent. We recover the environments used by the authors based on the partial original code they provided for one of the environments (Grid-World), and implemented the remaining from scratch (Seaquest, HalfCheetah, Breakout and Q*Bert). While we confirm that (i), (ii), and (iii) partially hold, we extend on the largely qualitative experiments from the authors by introducing a quantitative metric to further support (iii), and new experiments and visual results for (i). Moreover, we investigate the use of different clustering algorithms and encoder architectures to further support (ii). We could not support (iv), given the limited extent of the original experiments. We conclude that, while some of the claims can be supported, further investigations and experiments could be of interest. We recognise the novelty of the work from the authors and hope that our work paves the way for clearer and more transparent approaches.

  • 4 authors
·
Nov 11, 2024

FlowATC: Aircraft Trajectory Prediction via Flow Matching

Building accurate decision-support tools for next-generation air traffic control requires robust trajectory prediction models. We present a flow-matching architecture trained exclusively on historical aircraft trajectories, with no route labels or chart supervision. Trained on 1.15 million Automatic Dependent Surveillance-Broadcast trajectory windows collected over the San Francisco Bay Area, the model generates aircraft trajectory distributions that closely match historical traffic, reproducing known airspace structure around San Francisco Airport such as the shape of SFO's published NIITE FOUR departure procedure. Our model is trained directly on the native, irregular ADS-B sampling interval. Trajectory prediction is cast as sequence inpainting using a block-causal Transformer that denoises future state tokens conditioned on the observed history using Conditional Flow Matching or Denoising Diffusion Probabilistic Models. We compare our architecture against constant-velocity, deterministic-Long Short Term Memory, and Conditional Variational Autoencoders baselines. At matched parameter count, CFM outperforms DDPM by 11-26% in minADE@20, and both generative objectives surpass the CVAE baseline by 31-41%. We further show that the error degrades gracefully with prediction horizon, and the architecture remains effective when retrained on temporally decimated feeds. Lastly, we sample K independent completions, yielding spatial probabilistic occupancy estimates that can serve as input to downstream conflict-risk estimation.

  • 5 authors
·
Sep 14

ReflectDrive-2: Reinforcement-Learning-Aligned Self-Editing for Discrete Diffusion Driving

We introduce ReflectDrive-2, a masked discrete diffusion planner with separate action expert for autonomous driving that represents plans as discrete trajectory tokens and generates them through parallel masked decoding. This discrete token space enables in-place trajectory revision: AutoEdit rewrites selected tokens using the same model, without requiring an auxiliary refinement network. To train this capability, we use a two-stage procedure. First, we construct structure-aware perturbations of expert trajectories along longitudinal progress and lateral heading directions and supervise the model to recover the original expert trajectory. We then fine-tune the full decision--draft--reflect rollout with reinforcement learning (RL), assigning terminal driving reward to the final post-edit trajectory and propagating policy-gradient credit through full-rollout transitions. Full-rollout RL proves crucial for coupling drafting and editing: under supervised training alone, inference-time AutoEdit improves PDMS by at most 0.3, whereas RL increases its gain to 1.9. We also co-design an efficient reflective decoding stack for the decision--draft--reflect pipeline, combining shared-prefix KV reuse, Alternating Step Decode, and fused on-device unmasking. On NAVSIM, ReflectDrive-2 achieves 91.0 PDMS with camera-only input and 94.8 PDMS in a best-of-6 oracle setting, while running at 31.8 ms average latency on NVIDIA Thor.

  • 10 authors
·
May 5 3

Trajectory Unlearning on LLM-based Agents

Existing large language model (LLM) unlearning has focused primarily on removing specific knowledge, such as harmful facts, private data, or copyrighted content. However, as LLMs are increasingly deployed as autonomous agents, a fundamental yet overlooked problem emerges: beyond suppressing what an agent knows, an agent should not reproduce undesired behaviors through its action trajectories. In this work, we introduce trajectory-level unlearning, a new problem formulation that targets the removal of specific action trajectories in long-horizon agentic tasks, rather than factual knowledge. We identify two fundamental challenges that distinguish trajectory unlearning from knowledge unlearning: (1) our unlearning target is what the agent does, not what it says; and (2) trajectories are sequentially dependent action sequences that cannot be decomposed into isolated prompt-response pairs without losing inter-step structure. To address these challenges, we propose Group-injected Relative Policy Optimization (GiRPO), which injects forget trajectories into the policy rollout group with penalized rewards and isolates the normalization statistics, yielding a stable and bounded unlearning signal that does not corrupt gradient updates for normal task trajectories. We construct trajectory unlearning benchmarks from two application scenarios, household tasks (ALFWorld) and online shopping (WebShop), and design three complementary metrics for evaluating forgetting quality and model utility. Experiments on ALFWorld and WebShop demonstrate that GiRPO effectively unlearns target trajectories while preserving task success rates, outperforming existing knowledge-unlearning baselines on both forgetting quality and task utility.

  • 2 authors
·
Sep 26

Industrial Kinematic Trajectory Model (IKTM): Coordinate-Free Autoregressive Generator

Mobility simulation supports logistics, safety, and communications planning in industrial environments such as ports, mines, and airports. Existing trajectory models, however, rely on absolute coordinates, road-network tokens, or semantic zones: representations that are site-specific and not well suited to unstructured industrial terrain. We introduce the Industrial Kinematic Trajectory Model (IKTM), a coordinate-free trajectory generator that represents industrial vehicle motion through kinematic sequences (speed and heading change) with no absolute spatial reference. IKTM uses an autoregressive causal transformer with probabilistic mixture heads and extends our prior coordinate-free Markovian model with deep sequence modelling and an explicit duration-conditioning signal. Trained on one site and evaluated zero-shot on three unseen sites, it matches the small-turn shape of the empirical turn-rate distributions of held-out telematics; across all four sites, the per-site mean Jensen-Shannon divergence over 100 sampling seeds spans approximately 0.035-0.050 bits under an oracle-length duration-target protocol and approximately 0.032-0.042 bits under a fully zero-shot prior-length protocol, with similar ranges whether out-of-distribution (OOD) duration targets are drawn from each held-out site's empirical length distribution or from the Site A prior. Both protocols stay above the metric's sampling-noise floor (<=0.0049 bits). Paired by site, the oracle-length values are 5.3-6.0x lower than those of a re-implementation of our prior Markovian model under the same 1 Hz protocol. Termination is duration-conditioned rather than spatial: rollouts stop on 100% of trials with a length-tracking error of +0.0 +/- 0.0 s against the sampled target (100 of 100 exactly on target; N=100, T=0.2, untouched in-distribution test split).

  • 2 authors
·
Aug 26

RAP: 3D Rasterization Augmented End-to-End Planning

Imitation learning for end-to-end driving trains policies only on expert demonstrations. Once deployed in a closed loop, such policies lack recovery data: small mistakes cannot be corrected and quickly compound into failures. A promising direction is to generate alternative viewpoints and trajectories beyond the logged path. Prior work explores photorealistic digital twins via neural rendering or game engines, but these methods are prohibitively slow and costly, and thus mainly used for evaluation. In this work, we argue that photorealism is unnecessary for training end-to-end planners. What matters is semantic fidelity and scalability: driving depends on geometry and dynamics, not textures or lighting. Motivated by this, we propose 3D Rasterization, which replaces costly rendering with lightweight rasterization of annotated primitives, enabling augmentations such as counterfactual recovery maneuvers and cross-agent view synthesis. To transfer these synthetic views effectively to real-world deployment, we introduce a Raster-to-Real feature-space alignment that bridges the sim-to-real gap. Together, these components form Rasterization Augmented Planning (RAP), a scalable data augmentation pipeline for planning. RAP achieves state-of-the-art closed-loop robustness and long-tail generalization, ranking first on four major benchmarks: NAVSIM v1/v2, Waymo Open Dataset Vision-based E2E Driving, and Bench2Drive. Our results show that lightweight rasterization with feature alignment suffices to scale E2E training, offering a practical alternative to photorealistic rendering. Project page: https://alan-lanfeng.github.io/RAP/.

  • 8 authors
·
Oct 5, 2025

RESETTLE: Robotic Recovery through Disagreement-Triggered Retrieval and Efficient Corrective Control

Reliable robotic manipulation requires timely intervention to correct emerging deviations and restore progress after execution errors. However, recovery methods based on repeated vision-language reasoning or iterative online optimization can incur substantial latency, delaying intervention. To address these challenges, we introduce RESETTLE(Robotic rEcovery through diSagrEement-Triggered reTrievaL and Efficient Corrective Control), a model-agnostic framework that provides computationally efficient recovery at the action-execution interface of frozen robot policies. RESETTLE triggers recovery when two action proposals independently sampled under identical conditioning persistently disagree. It retrieves a same-task demonstration reference using an adapted V-JEPA encoder and combines a state-servo prior with a guarded visual residual to execute one corrective action without online trajectory optimization or additional vision-language reasoning, then returns control to the base policy. Across six base policies in simulation, RESETTLE achieves up to 8.70%, 6.28%, and 6.83% absolute success-rate gains on LIBERO-Plus, Meta-World, and RoboCasa Tabletop, respectively, with further improvements on four real-world tasks using two policies. In QwenPI-based comparisons, its monitoring-and-recovery computation latency is 74.04%--93.57% lower than VoLoAgent's monitoring-and-planning latency for grasp and place tool calls. It also raises Harness VLA's LIBERO-Pro Swap success from 42% to 50%, demonstrating compatibility with high-level agentic planning. Code available at: https://github.com/JIA-Lab-research/RESETTLE

  • 9 authors
·
Oct 7

Travel Back To Move Forward: Retrospective Exploration and Evolving for Long Horizon Agents

Large language model agents increasingly operate in long-horizon environments where early mistakes can trigger cascading failures and trap agents in dead-end trajectories. Agents must therefore be able to proactively recover from such states and turn their exploratory experience into guidance for subsequent decisions. We introduce ReTRAIL, a framework that enables agents to rewind the environment to earlier states while preserving valid progress and carrying forward knowledge learned from abandoned exploration. The environment state moves backward while the agent's knowledge continues to move forward. ReTRAIL trains a shared policy with two complementary signals: State-Anchored GRPO compares alternative continuations from revisited states to improve execution, while a branch-advancement reward guides reflection through the progress of subsequent exploration. Experiments across four interactive benchmark MineSweeper, Sokoban, ALFWorld and ScienceWorld show that simply adding a rewind primitive provides limited benefit and can even degrade performance. In contrast, ReTRAIL enables agents to rewind from unproductive states and use insights from abandoned branches to guide subsequent exploration. These results demonstrate the value of coupling environment rewinding with experience reuse within an ongoing task for long-horizon task solving. The code is available at https://github.com/whi497/ReTRAIL.

  • 10 authors
·
Oct 8

Bug Report Specification Refinement with Trajectory Guidance for Automated Program Repair

Bug reports serve as task specifications for repository-level automated program repair (APR) agents, but they often describe only the observed failure and omit repair-relevant information such as the failure-inducing behavior, behavioral requirement, and implementation scope. As a result, a repair agent may inspect irrelevant code, infer an incorrect requirement, or generate a patch that addresses the reported symptom without restoring the intended repository behavior. We present TrajSpec, a trajectory-guided approach for repository-supported bug report specification refinement. Given an original report and a pre-fix repository, TrajSpec runs a trajectory-collection agent and uses the resulting unverified trajectory as a source of trajectory-derived specification evidence. It organizes this evidence into a three-level representation consisting of a high-level interpretation of the issue, diagnostic findings supporting that interpretation, and concrete repository observations. TrajSpec then generates a draft refined report and applies repository-based review to remove unsupported claims, revise uncertain claims, and add repository-supported details. We evaluate TrajSpec on all 300 SWE-Bench Lite instances using Mini-SWE-Agent V2. TrajSpec's refined reports improve Pass@1 from 41.00% to 59.67% with GPT-5-mini and from 54.67% to 64.33% with MiniMax M2.5. On a stratified sample of 100 instances, TrajSpec's refined reports also improve Pass@1 from 41.00% to 71.00% with Agentless and from 47.00% to 72.00% with AutoCodeRover. Ablation results show that removing repository-based review or the hierarchical evidence representation reduces Pass@1 from 59.67% to 48.00% and 47.67%, respectively. Overall, TrajSpec provides actionable repository-supported context that consistently improves repair performance.

  • 8 authors
·
Jul 7

Effective Multi-sensor Conditioning for Street-view Novel-view Synthesis

Modern vehicle platforms are equipped with a rich sensor suite, including LiDAR, calibrated multi-camera rigs, and accurate ego-motion, that in principle offers strong signal for re-rendering a driving scene from novel viewpoints. A growing line of recent work leverages video diffusion models for this task, using their generative priors to synthesize plausible novel views from sparse vehicle observations. In practice, however, existing methods exploit only a fragment of this signal, and their quality tends to degrade as the target trajectory departs from the recorded driving path. We argue that this is fundamentally a multi-sensor fusion problem: sparse LiDAR reprojections supply accurate but incomplete metric geometry, surround-view reference imagery supplies dense appearance but no metric depth, and camera poses tie the two together across views. We introduce StreetNVS, a video diffusion framework that jointly conditions on all three signals through a Reference-Enhanced Camera Attention module based on a relative ray-level positional encoding. We develop a two-stage curriculum training strategy that gradually exposes the model to increasingly sparse LiDAR. On the Waymo Open Dataset, StreetNVS substantially outperforms state-of-the-art baselines under sparse LiDAR conditioning, matches methods that rely on 10-100 times denser point clouds. We further show capabilities of synthesizing coherent videos along extreme out-of-trajectory paths such as elevation, lane-shift, pullback, and rotation. Our website: https://streetnvs.github.io

  • 10 authors
·
Aug 18

Trace Anything: Representing Any Video in 4D via Trajectory Fields

Effective spatio-temporal representation is fundamental to modeling, understanding, and predicting dynamics in videos. The atomic unit of a video, the pixel, traces a continuous 3D trajectory over time, serving as the primitive element of dynamics. Based on this principle, we propose representing any video as a Trajectory Field: a dense mapping that assigns a continuous 3D trajectory function of time to each pixel in every frame. With this representation, we introduce Trace Anything, a neural network that predicts the entire trajectory field in a single feed-forward pass. Specifically, for each pixel in each frame, our model predicts a set of control points that parameterizes a trajectory (i.e., a B-spline), yielding its 3D position at arbitrary query time instants. We trained the Trace Anything model on large-scale 4D data, including data from our new platform, and our experiments demonstrate that: (i) Trace Anything achieves state-of-the-art performance on our new benchmark for trajectory field estimation and performs competitively on established point-tracking benchmarks; (ii) it offers significant efficiency gains thanks to its one-pass paradigm, without requiring iterative optimization or auxiliary estimators; and (iii) it exhibits emergent abilities, including goal-conditioned manipulation, motion forecasting, and spatio-temporal fusion. Project page: https://trace-anything.github.io/.

ByteDance-Seed ByteDance Seed
·
Oct 15, 2025 2

Action Learning for Scientific Simulations

Understanding and controlling how systems evolve is central to science and engineering, where many problems require reasoning about complete trajectories. Existing approaches typically learn local dynamics or generate trajectories, but objectives constructed from individual transitions can miss dependencies across time, while generative models do not necessarily provide a tractable objective for evaluating and optimizing arbitrary paths. We study action learning, the problem of recovering a stochastic action from trajectory observations, yielding a common objective for reasoning about dynamical systems. We introduce LEAP (Learned Energy on Action Paths), which anchors the unknown action to a tractable reference process and learns the remaining correction by comparing observed trajectories with reference trajectories. This construction yields a differentiable objective on path space that can capture both local dynamical structure and nonadditive dependencies across time. Once learned, the same action can be flexibly reused for path ranking and inference, mechanism steering, constrained optimization and sampling. Across stochastic physical systems, many-body orbital dynamics and molecular simulations, LEAP recovers underlying dynamics, captures dependencies across time and enables transfer across inference objectives and physical conditions. We show that action learning is a promising framework for turning trajectory observations into reusable objectives for scientific inference and control.

  • 3 authors
·
Oct 21