Daily Papers

As LLM-based agents increasingly browse the web on users' behalf, a natural question arises: can websites passively identify which underlying model powers an agent? Doing so would represent a significant security risk, enabling targeted attacks tailored to known model vulnerabilities. Across 14 frontier LLMs and four web environments spanning information retrieval and shopping tasks, we show that an agent's actions and interaction timings, captured via a passive JavaScript tracker, are sufficient to identify the underlying model with up to 96\% F1. We formalise this attack surface by demonstrating that classifiers trained on agent actions generalise across model sizes and families. We further show that strong classifiers can be trained from few interaction traces and that agent identity can be inferred early within an episode. Injecting randomised timing delays between actions substantially degrades classifier performance, but does not provide robust protection: a classifier retrained on delayed traces largely recovers performance. We release our harness and a labelled corpus of agent traces https://github.com/KabakaWilliam/known_actions{here}.

Current open-source prompt-injection detectors converge on two architectural choices: regular-expression pattern matching and fine-tuned transformer classifiers. Both share failure modes that recent work has made concrete. Regular expressions miss paraphrased attacks. Fine-tuned classifiers are vulnerable to adaptive adversaries: a 2025 NAACL Findings study reported that eight published indirect-injection defenses were bypassed with greater than fifty percent attack success rates under adaptive attacks. This work proposes seven detection techniques that each port a specific mechanism from a discipline outside large-language-model security: forensic linguistics, materials-science fatigue analysis, deception technology from network security, local-sequence alignment from bioinformatics, mechanism design from economics, spectral signal analysis from epidemiology, and taint tracking from compiler theory. Three of the seven techniques are implemented in the prompt-shield v0.4.1 release (Apache 2.0) and evaluated in a four-configuration ablation across six datasets including deepset/prompt-injections, NotInject, LLMail-Inject, AgentHarm, and AgentDojo. The local-alignment detector lifts F1 on deepset from 0.033 to 0.378 with zero additional false positives. The stylometric detector adds 11.1 percentage points of F1 on an indirect-injection benchmark. The fatigue tracker is validated via a probing-campaign integration test. All code, data, and reproduction scripts are released under Apache 2.0.

How would you fairly evaluate two multi-object tracking algorithms (i.e. trackers), each one employing a different object detector? Detectors keep improving, thus trackers can make less effort to estimate object states over time. Is it then fair to compare a new tracker employing a new detector with another tracker using an old detector? In this paper, we propose a novel performance measure, named Tracking Effort Measure (TEM), to evaluate trackers that use different detectors. TEM estimates the improvement that the tracker does with respect to its input data (i.e. detections) at frame level (intra-frame complexity) and sequence level (inter-frame complexity). We evaluate TEM over well-known datasets, four trackers and eight detection sets. Results show that, unlike conventional tracking evaluation measures, TEM can quantify the effort done by the tracker with a reduced correlation on the input detections. Its implementation is publicly available online at https://github.com/vpulab/MOT-evaluation.

Tracking and following objects of interest is critical to several robotics use cases, ranging from industrial automation to logistics and warehousing, to healthcare and security. In this paper, we present a robotic system to detect, track, and follow any object in real-time. Our approach, dubbed ``follow anything'' (FAn), is an open-vocabulary and multimodal model -- it is not restricted to concepts seen at training time and can be applied to novel classes at inference time using text, images, or click queries. Leveraging rich visual descriptors from large-scale pre-trained models (foundation models), FAn can detect and segment objects by matching multimodal queries (text, images, clicks) against an input image sequence. These detected and segmented objects are tracked across image frames, all while accounting for occlusion and object re-emergence. We demonstrate FAn on a real-world robotic system (a micro aerial vehicle) and report its ability to seamlessly follow the objects of interest in a real-time control loop. FAn can be deployed on a laptop with a lightweight (6-8 GB) graphics card, achieving a throughput of 6-20 frames per second. To enable rapid adoption, deployment, and extensibility, we open-source all our code on our project webpage at https://github.com/alaamaalouf/FollowAnything . We also encourage the reader the watch our 5-minutes explainer video in this https://www.youtube.com/watch?v=6Mgt3EPytrw .

As AI coding agents become more autonomous, they increasingly ship code iteratively, with the codebase persisting across sessions. This persistence creates a new attack surface: a misaligned or prompt-injected agent can distribute attacks across pull requests (PRs) and time its payload for the PR with the best natural cover. To study the resulting dynamics, we introduce Iterative VibeCoding, a setting for AI control, the study of safely deploying capable but potentially untrusted AI. In Iterative VibeCoding, a coding agent builds software over a sequence of PRs in a persistent codebase while pursuing a covert side task. Our benchmark includes two task families: CLI tools and Flask web services, across 20 total task variations. We use Claude Sonnet 4.5 as the attack agent and GPT-4o as the monitor. We compare gradual attacks, which distribute the side task across PRs, against non-gradual attacks concentrated in a single PR. No single monitor is robust to both: which strategy evades best (success while evading the monitor) depends on the monitor type, so a defender cannot close off both gradual and non-gradual attacks with any one monitor. High evasion (>= 65%) generalizes across model attack agent backends (Sonnet 4.5, Gemini 3.1 Pro, Kimi K2.5), confirming this is a property of the persistent-state attack surface rather than a single model's capability. Evasion also remains high across state-of-the-art monitor models and the gap between gradual and non-gradual evasion widens for more capable models. We introduce a stateful link-tracker monitor that tracks suspicious buildup across PRs. On both task families, it detects gradual attacks substantially better than diff monitors that merely see more accumulated history. Combining this stronger monitor with trajectory monitors in a four-monitor ensemble reduces gradual-attack evasion from 93% under the weakest standard diff monitor to 47%.

Current coding-agent benchmarks usually pro- vide the full task specification upfront. Real research coding often does not: the intended system is progressively disclosed through in- teraction, requiring the agent to track durable design commitments across a long session. We introduce a benchmark for this setting and study faithfulne Ss Loss U nder eM ergent s Pecification (SLUMP), defined as the reduc- tion in final implementation faithfulness un- der emergent specification relative to a single- shot specification control. The benchmark con- tains 20 recent ML papers (10 ICML 2025, 10 NeurIPS 2025), 371 atomic verifiable compo- nents, and interaction scripts of approximately 60 coding requests that progressively disclose the target design without revealing the paper itself. Final repositories are scored with a five-level component-faithfulness rubric and accompanied by an exposure audit to verify that scored components are recoverable from the visible interaction. Evaluated on Claude Code and Codex, the single-shot specification control achieves higher overall implementation fidelity on 16/20 and 14/20 papers, respectively. Structural integration degrades under emergent specification on both platforms, while seman- tic faithfulness loss is substantial on Claude Code and small on Codex. As a mitigation case study, we introduce ProjectGuard, an exter- nal project-state layer for specification tracking. On Claude Code, ProjectGuard recovers 90% of the faithfulness gap, increases fully faith- ful components from 118 to 181, and reduces severe failures from 72 to 49. These results identify specification tracking as a distinct eval- uation target for long-horizon coding agents.

Smart contracts, self-executing programs on the blockchain, facilitate reliable value exchanges without centralized oversight. Despite the recent focus on dynamic analysis of their transaction histories in both industry and academia, no open-source tool currently offers comprehensive tracking of complete transaction information to extract user-desired data such as invariant-related data. This paper introduces OpenTracer, designed to address this gap. OpenTracer guarantees comprehensive tracking of every execution step, providing complete transaction information. OpenTracer has been employed to analyze 350,800 Ethereum transactions, successfully inferring 23 different types of invariant from predefined templates. The tool is fully open-sourced, serving as a valuable resource for developers and researchers aiming to study transaction behaviors or extract and validate new invariants from transaction traces. The source code of OpenTracer is available at https://github.com/jeffchen006/OpenTracer.

Websites use third-party ads and tracking services to deliver targeted ads and collect information about users that visit them. These services put users' privacy at risk, and that is why users' demand for blocking these services is growing. Most of the blocking solutions rely on crowd-sourced filter lists manually maintained by a large community of users. In this work, we seek to simplify the update of these filter lists by combining different websites through a large-scale graph connecting all resource requests made over a large set of sites. The features of this graph are extracted and used to train a machine learning algorithm with the aim of detecting ads and tracking resources. As our approach combines different information sources, it is more robust toward evasion techniques that use obfuscation or changing the usage patterns. We evaluate our work over the Alexa top-10K websites and find its accuracy to be 96.1% biased and 90.9% unbiased with high precision and recall. It can also block new ads and tracking services, which would necessitate being blocked by further crowd-sourced existing filter lists. Moreover, the approach followed in this paper sheds light on the ecosystem of third-party tracking and advertising.

Prompt injection attacks manipulate webpage content to cause web agents to execute attacker-specified tasks instead of the user's intended ones. Existing methods for detecting and localizing such attacks achieve limited effectiveness, as their underlying assumptions often do not hold in the web-agent setting. In this work, we propose WebSentinel, a two-step approach for detecting and localizing prompt injection attacks in webpages. Given a webpage, Step I extracts segments of interest that may be contaminated, and Step II evaluates each segment by checking its consistency with the webpage content as context. We show that WebSentinel is highly effective, substantially outperforming baseline methods across multiple datasets of both contaminated and clean webpages that we collected. Our code is available at: https://github.com/wxl-lxw/WebSentinel.

This paper presents a novel method of executable steganography using the alpha transparency layer of ICO image files to embed and deliver self-decompressing JavaScript payloads within web browsers. By targeting the least significant bit (LSB) of non-transparent alpha layer image values, the proposed method successfully conceals compressed JavaScript code inside a favicon image without affecting visual fidelity. Global web traffic loads 294 billion favicons daily and consume 0.9 petabytes of network bandwidth. A proof-of-concept implementation demonstrates that a 64x64 ICO image can embed up to 512 bytes uncompressed, or 0.8 kilobyte when using lightweight two-fold compression. On page load, a browser fetches the favicon as part of standard behavior, allowing an embedded loader script to extract and execute the payload entirely in memory using native JavaScript APIs and canvas pixel access. This creates a two-stage covert channel requiring no additional network or user requests. Testing across multiple browsers in both desktop and mobile environments confirms successful and silent execution of the embedded script. We evaluate the threat model, relate it to polymorphic phishing attacks that evade favicon-based detection, and analyze evasion of content security policies and antivirus scanners. We map nine example MITRE ATT&CK Framework objectives to single line JavaScript to execute arbitrarily in ICO files. Existing steganalysis and sanitization defenses are discussed, highlighting limitations in detecting or neutralizing alpha-channel exploits. The results demonstrate a stealthy and reusable attack surface that blurs traditional boundaries between static images and executable content. Because modern browsers report silent errors when developers specifically fail to load ICO files, this attack surface offers an interesting example of required web behaviors that in turn compromise security.

Visual object tracking aims to localize the target object of each frame based on its initial appearance in the first frame. Depending on the input modility, tracking tasks can be divided into RGB tracking and RGB+X (e.g. RGB+N, and RGB+D) tracking. Despite the different input modalities, the core aspect of tracking is the temporal matching. Based on this common ground, we present a general framework to unify various tracking tasks, termed as OneTracker. OneTracker first performs a large-scale pre-training on a RGB tracker called Foundation Tracker. This pretraining phase equips the Foundation Tracker with a stable ability to estimate the location of the target object. Then we regard other modality information as prompt and build Prompt Tracker upon Foundation Tracker. Through freezing the Foundation Tracker and only adjusting some additional trainable parameters, Prompt Tracker inhibits the strong localization ability from Foundation Tracker and achieves parameter-efficient finetuning on downstream RGB+X tracking tasks. To evaluate the effectiveness of our general framework OneTracker, which is consisted of Foundation Tracker and Prompt Tracker, we conduct extensive experiments on 6 popular tracking tasks across 11 benchmarks and our OneTracker outperforms other models and achieves state-of-the-art performance.

Context: Exhaustive fuzzing of modern JavaScript engines is infeasible due to the vast number of program states and execution paths. Coverage-guided fuzzers waste effort on low-risk inputs, often ignoring vulnerability-triggering ones that do not increase coverage. Existing heuristics proposed to mitigate this require expert effort, are brittle, and hard to adapt. Objective: We propose a data-centric, LLM-boosted alternative that learns from historical vulnerabilities to automatically identify minimal static (code) and dynamic (runtime) features for detecting high-risk inputs. Method: Guided by historical V8 bugs, iterative prompting generated 115 static and 49 dynamic features, with the latter requiring only five trace flags, minimizing instrumentation cost. After feature selection, 41 features remained to train an XGBoost model to predict high-risk inputs during fuzzing. Results: Combining static and dynamic features yields over 85% precision and under 1% false alarms. Only 25% of these features are needed for comparable performance, showing that most of the search space is irrelevant. Conclusion: This work introduces feature-guided fuzzing, an automated data-driven approach that replaces coverage with data-directed inference, guiding fuzzers toward high-risk states for faster, targeted, and reproducible vulnerability discovery. To support open science, all scripts and data are available at https://github.com/KKGanguly/DataCentricFuzzJS .

Multi-object tracking (MOT) aims at estimating bounding boxes and identities of objects in videos. Most methods obtain identities by associating detection boxes whose scores are higher than a threshold. The objects with low detection scores, e.g. occluded objects, are simply thrown away, which brings non-negligible true object missing and fragmented trajectories. To solve this problem, we present a simple, effective and generic association method, tracking by associating almost every detection box instead of only the high score ones. For the low score detection boxes, we utilize their similarities with tracklets to recover true objects and filter out the background detections. When applied to 9 different state-of-the-art trackers, our method achieves consistent improvement on IDF1 score ranging from 1 to 10 points. To put forwards the state-of-the-art performance of MOT, we design a simple and strong tracker, named ByteTrack. For the first time, we achieve 80.3 MOTA, 77.3 IDF1 and 63.1 HOTA on the test set of MOT17 with 30 FPS running speed on a single V100 GPU. ByteTrack also achieves state-of-the-art performance on MOT20, HiEve and BDD100K tracking benchmarks. The source code, pre-trained models with deploy versions and tutorials of applying to other trackers are released at https://github.com/ifzhang/ByteTrack.

This paper introduces SFSORT, the world's fastest multi-object tracking system based on experiments conducted on MOT Challenge datasets. To achieve an accurate and computationally efficient tracker, this paper employs a tracking-by-detection method, following the online real-time tracking approach established in prior literature. By introducing a novel cost function called the Bounding Box Similarity Index, this work eliminates the Kalman Filter, leading to reduced computational requirements. Additionally, this paper demonstrates the impact of scene features on enhancing object-track association and improving track post-processing. Using a 2.2 GHz Intel Xeon CPU, the proposed method achieves an HOTA of 61.7\% with a processing speed of 2242 Hz on the MOT17 dataset and an HOTA of 60.9\% with a processing speed of 304 Hz on the MOT20 dataset. The tracker's source code, fine-tuned object detection model, and tutorials are available at https://github.com/gitmehrdad/SFSORT.

With the emergence of the Node.js ecosystem, JavaScript has become a widely-used programming language for implementing server-side web applications. In this paper, we present the first empirical study of static code analysis tools for detecting vulnerabilities in Node.js code. To conduct a comprehensive tool evaluation, we created the largest known curated dataset of Node.js code vulnerabilities. We characterized and annotated a set of 957 vulnerabilities by analyzing information contained in npm advisory reports. We tested nine different tools and found that many important vulnerabilities appearing in the OWASP Top-10 are not detected by any tool. The three best performing tools combined only detect up to 57.6% of all vulnerabilities in the dataset, but at a very low precision of 0.11%. Our curated dataset offers a new benchmark to help characterize existing Node.js code vulnerabilities and foster the development of better vulnerability detection tools for Node.js code.

Statically analyzing dynamically-typed code is a challenging endeavor, as even seemingly trivial tasks such as determining the targets of procedure calls are non-trivial without knowing the types of objects at compile time. Addressing this challenge, gradual typing is increasingly added to dynamically-typed languages, a prominent example being TypeScript that introduces static typing to JavaScript. Gradual typing improves the developer's ability to verify program behavior, contributing to robust, secure and debuggable programs. In practice, however, users only sparsely annotate types directly. At the same time, conventional type inference faces performance-related challenges as program size grows. Statistical techniques based on machine learning offer faster inference, but although recent approaches demonstrate overall improved accuracy, they still perform significantly worse on user-defined types than on the most common built-in types. Limiting their real-world usefulness even more, they rarely integrate with user-facing applications. We propose CodeTIDAL5, a Transformer-based model trained to reliably predict type annotations. For effective result retrieval and re-integration, we extract usage slices from a program's code property graph. Comparing our approach against recent neural type inference systems, our model outperforms the current state-of-the-art by 7.85% on the ManyTypes4TypeScript benchmark, achieving 71.27% accuracy overall. Furthermore, we present JoernTI, an integration of our approach into Joern, an open source static analysis tool, and demonstrate that the analysis benefits from the additional type information. As our model allows for fast inference times even on commodity CPUs, making our system available through Joern leads to high accessibility and facilitates security research.

This paper presents an eight-week observational comparison of 68 single-file HTML generations collected across 17 public experiments in the "HTML AI Battle" project between December 10, 2025 and February 4, 2026. Four reasoning model families, GPT, Gemini, Grok, and Claude, were compared under a fixed public-interface protocol with no custom instructions, no personality tuning, and no repair prompts. Each output was evaluated from a rendered browser video using human scores and a Gemini LLM-as-a-judge layer for prompt adherence, functional correctness, and UI quality, then packaged into a standardized social-media protocol spanning X (Twitter), TikTok, and YouTube. The tracker was also used for two supervised predictive analyses: an experiment-level model for 24-hour X impressions and a generation-level model for HTML verbosity. Under this protocol, Claude was the strongest and most consistent family, leading mean performance and winning 9/17 prompts under the primary human weighted score. Longer measured reasoning time was not associated with higher quality overall. Gemini as a judge was significantly more lenient than the human evaluator on functional correctness and overall performance, while stable self-favoring bias remained unresolved. The exploratory X-impressions model remained weak under post-screen cross-validation (MAE = 46,874, R^2 = -0.377), whereas the HTML-lines model performed better, with a model-family-only baseline outperforming prompt-aware alternatives (MAE = 135.2, R^2 = 0.576). Overall, selected pre-publication technical/audio variables were not sufficient to predict 24-hour X reach, while code verbosity was driven much more by model family than by prompt wording. The comparisons remain observational and are limited by public-interface drift, access-path differences, and one primary human scorer.

Reactive programming frameworks such as React allow developers to build interactive applications by declaratively specifying how outputs depend on changing inputs. Although this model makes it easy to reason about what an application computes, the temporal behavior of reactive programs remains difficult to understand and verify. Applications implicitly rely on timing assumptions buried in framework runtimes, leading to subtle bugs such as stale reads, transient inconsistencies, order-dependent behavior, and unintended feedback cycles. To address these challenges, this paper presents Willow, a core calculus for reactive programming inspired by React. Willow gives a time-aware operational semantics that models computation in terms of renders, the fundamental evaluation step in which components produce user interface descriptions, and pairs it with a novel type-and-effect system that statically tracks timing behavior as effects. A "next" modality expresses delays measured not only in renders but in any unit the host environment exposes--renders, network requests, or milliseconds. A family of modalities tracks the lifecycle of event handlers: when they are registered, when they fire, when pending events are canceled and when handlers are removed. A key insight is that the resulting effects form a temporal dependency graph, letting standard graph algorithms statically detect render cascades and inter-render loops that cause non-termination or performance degradation. We formalize Willow and prove preservation of the effect system with respect to the time-aware semantics. We also implement a prototype checker with automatic effect inference and evaluate it on representative reactive patterns such as debouncing, form inputs, and API-driven updates. Our results demonstrate that time-aware typing provides a practical foundation for reasoning about the temporal correctness of reactive programs.

Large language model (LLM) agents now execute long, tool-using tasks where final outcome checks can arrive too late for intervention. Online warning requires lightweight prefix monitors over heterogeneous traces, but hand-authored event schemas are brittle and deployment-time LLM judging is costly. We introduce PrefixGuard, a trace-to-monitor framework with an offline StepView induction step followed by supervised monitor training. StepView induces deterministic typed-step adapters from raw trace samples, and the monitor learns an event abstraction and prefix-risk scorer from terminal outcomes. Across WebArena, τ^2-Bench, SkillsBench, and TerminalBench, the strongest PrefixGuard monitors reach 0.900/0.710/0.533/0.557 AUPRC. Using the strongest backend within each representation, they improve over raw-text controls by an average of +0.137 AUPRC. LLM judges remain substantially weaker under the same prefix-warning protocol. We also derive an observability ceiling on score-based area under the precision-recall curve (AUPRC) that separates monitor error from failures lacking evidence in the observed prefix. For finite-state audit, post-hoc deterministic finite automaton (DFA) extraction remains compact on WebArena and τ^2-Bench (29 and 20 states) but expands to 151 and 187 states on SkillsBench and TerminalBench. Finally, first-alert diagnostics show that strong ranking does not imply deployment utility: WebArena ranks well yet fails to support low-false-alarm alerts, whereas τ^2-Bench and TerminalBench retain more actionable early alerts. Together, these results position PrefixGuard as a practical monitor-synthesis recipe with explicit diagnostics for when prefix warnings translate into actionable interventions.

In existing joint detection and tracking methods, pairwise relational features are used to match previous tracklets to current detections. However, the features may not be discriminative enough for a tracker to identify a target from a large number of detections. Selecting only high-scored detections for tracking may lead to missed detections whose confidence score is low. Consequently, in the online setting, this results in disconnections of tracklets which cannot be recovered. In this regard, we present Sparse Graph Tracker (SGT), a novel online graph tracker using higher-order relational features which are more discriminative by aggregating the features of neighboring detections and their relations. SGT converts video data into a graph where detections, their connections, and the relational features of two connected nodes are represented by nodes, edges, and edge features, respectively. The strong edge features allow SGT to track targets with tracking candidates selected by top-K scored detections with large K. As a result, even low-scored detections can be tracked, and the missed detections are also recovered. The robustness of K value is shown through the extensive experiments. In the MOT16/17/20 and HiEve Challenge, SGT outperforms the state-of-the-art trackers with real-time inference speed. Especially, a large improvement in MOTA is shown in the MOT20 and HiEve Challenge. Code is available at https://github.com/HYUNJS/SGT.

This paper presents a comprehensive experimental evaluation and detailed analysis of state-of-the-art multi-object tracking algorithms, with an emphasis on quantifying the individual contributions of detection and association components to overall tracking performance. Unlike existing surveys that primarily offer theoretical categorizations or taxonomies of tracking methods, our work adopts a rigorous experimental perspective grounded in publicly available implementations, providing practical guidance for researchers and practitioners in method selection and system design. We introduce a unified pipeline diagram that consolidates the core components across the two main branches of visual multi-object tracking: tracking-by-detection and end-to-end deep learning paradigms, and systematically analyze the object detection, feature extraction, and data association modules. Through extensive empirical studies on standard benchmarks, including MOT16, MOT17, MOT20, SportsMOT, DanceTrack, and CrowdTrack datasets, we reveal critical insights: (1) detection quality dominates association strategy performance, with detector improvements yielding more than 10% gains compared to less than 5% from refined association strategies; (2) modern deep learning detectors paired with specialized re-identification models significantly outperform joint detection and embedding approaches; and (3) transformer-based end-to-end methods exhibit greater robustness to detection quality variations but at a substantial computational cost. Our findings from extensive experiments provide key insights into component-level effects in MOT, particularly the dominant influence of detection quality relative to association, while offering practical insights for designing and optimizing MOT systems under varying performance and robustness requirements. Code and experimental setups are available at github.com/linh-gist/VisualMOT.

Recently, Multi-Object Tracking (MOT) has attracted rising attention, and accordingly, remarkable progresses have been achieved. However, the existing methods tend to use various basic models (e.g, detector and embedding model), and different training or inference tricks, etc. As a result, the construction of a good baseline for a fair comparison is essential. In this paper, a classic tracker, i.e., DeepSORT, is first revisited, and then is significantly improved from multiple perspectives such as object detection, feature embedding, and trajectory association. The proposed tracker, named StrongSORT, contributes a strong and fair baseline for the MOT community. Moreover, two lightweight and plug-and-play algorithms are proposed to address two inherent "missing" problems of MOT: missing association and missing detection. Specifically, unlike most methods, which associate short tracklets into complete trajectories at high computation complexity, we propose an appearance-free link model (AFLink) to perform global association without appearance information, and achieve a good balance between speed and accuracy. Furthermore, we propose a Gaussian-smoothed interpolation (GSI) based on Gaussian process regression to relieve the missing detection. AFLink and GSI can be easily plugged into various trackers with a negligible extra computational cost (1.7 ms and 7.1 ms per image, respectively, on MOT17). Finally, by fusing StrongSORT with AFLink and GSI, the final tracker (StrongSORT++) achieves state-of-the-art results on multiple public benchmarks, i.e., MOT17, MOT20, DanceTrack and KITTI. Codes are available at https://github.com/dyhBUPT/StrongSORT and https://github.com/open-mmlab/mmtracking.

When a professional web developer's code fails a test, they do not simply re-read the stack trace. They open the application in a browser, click buttons, inspect computed styles, and run diagnostic commands to understand what went wrong. Existing feedback mechanisms for coding agents rely on screenshots, LLM-as-a-judge scoring, or natural-language corrections, but few interact with the live application the way a developer would. We introduce WatchPoint, a simulated-user system that mimics real developer behavior by generating and executing diagnostic scripts against the running application, producing structured observations that guide the coding model's retry. Unlike prior approaches that target single-file edits or evaluate using non-executable metrics, we operate on Web-Bench, a benchmark of 50 multi-file web projects comprising 1,000 sequentially dependent tasks, verified by deterministic end-to-end tests. WatchPoint recovers 57.6% of the tasks it diagnoses, and a controlled user study confirms the simulation's realism: human testers achieve a comparable recovery rate (54.5%), providing evidence that automated diagnostic scripts can substitute for interactive human testing on sequential web development tasks. We further identify a pattern of capability gaps that governs when simulated-user feedback is helpful and when it should be withheld.

Object tracking has achieved significant progress over the past few years. However, state-of-the-art trackers become increasingly heavy and expensive, which limits their deployments in resource-constrained applications. In this work, we present LightTrack, which uses neural architecture search (NAS) to design more lightweight and efficient object trackers. Comprehensive experiments show that our LightTrack is effective. It can find trackers that achieve superior performance compared to handcrafted SOTA trackers, such as SiamRPN++ and Ocean, while using much fewer model Flops and parameters. Moreover, when deployed on resource-constrained mobile chipsets, the discovered trackers run much faster. For example, on Snapdragon 845 Adreno GPU, LightTrack runs 12times faster than Ocean, while using 13times fewer parameters and 38times fewer Flops. Such improvements might narrow the gap between academic models and industrial deployments in object tracking task. LightTrack is released at https://github.com/researchmm/LightTrack.

Deobfuscating JavaScript (JS) code poses a significant challenge in web security, particularly as obfuscation techniques are frequently used to conceal malicious activities within scripts. While Large Language Models (LLMs) have recently shown promise in automating the deobfuscation process, transforming detection and mitigation strategies against these obfuscated threats, a systematic benchmark to quantify their effectiveness and limitations has been notably absent. To address this gap, we present JsDeObsBench, a dedicated benchmark designed to rigorously evaluate the effectiveness of LLMs in the context of JS deobfuscation. We detail our benchmarking methodology, which includes a wide range of obfuscation techniques ranging from basic variable renaming to sophisticated structure transformations, providing a robust framework for assessing LLM performance in real-world scenarios. Our extensive experimental analysis investigates the proficiency of cutting-edge LLMs, e.g., GPT-4o, Mixtral, Llama, and DeepSeek-Coder, revealing superior performance in code simplification despite challenges in maintaining syntax accuracy and execution reliability compared to baseline methods. We further evaluate the deobfuscation of JS malware to exhibit the potential of LLMs in security scenarios. The findings highlight the utility of LLMs in deobfuscation applications and pinpoint crucial areas for further improvement.

Existing benchmarks for MLLM-generated web artifacts assess interaction through local evidence and miss the requirement-induced states and transitions that determine whether a page works. We introduce WebRISE, which compiles task requirements into Interaction Contract Graphs (ICGs) of observable states, user-intent transitions, and DOM/visual assertions for implementation-agnostic browser execution. WebRISE spans 442 tasks across five input modalities (Text, Markdown, Sketch, Image, Video), with 5,495 transitions and 5,271 requirement checks that separate user-stated functions from implicit product-level constraints. Across 14 MLLMs, even the strongest model reaches only 65.6% transition validity and 66.3% requirement coverage, and visual quality is no proxy for behavior (Qwen3.6-35B-A3B on Markdown: V=80.8 yet T=15.5). Video gives the strongest interaction signal (+10.6 pp implicit coverage over Text), while implicit constraints persist; defect injection shows ICG-based scoring detects state errors at 2-16x the rate of checkpoint-style evaluation.

Efficient visual trackers overfit to their training distributions and lack generalization abilities, resulting in them performing well on their respective in-distribution (ID) test sets and not as well on out-of-distribution (OOD) sequences, imposing limitations to their deployment in-the-wild under constrained resources. We introduce SiamABC, a highly efficient Siamese tracker that significantly improves tracking performance, even on OOD sequences. SiamABC takes advantage of new architectural designs in the way it bridges the dynamic variability of the target, and of new losses for training. Also, it directly addresses OOD tracking generalization by including a fast backward-free dynamic test-time adaptation method that continuously adapts the model according to the dynamic visual changes of the target. Our extensive experiments suggest that SiamABC shows remarkable performance gains in OOD sets while maintaining accurate performance on the ID benchmarks. SiamABC outperforms MixFormerV2-S by 7.6\% on the OOD AVisT benchmark while being 3x faster (100 FPS) on a CPU. Our code and models are available at https://wvuvl.github.io/SiamABC/.

While long-horizon mobile GUI agents typically rely on thought-action-observation loops, they struggle to separate persistent task states from transient screen observations. As execution histories grow, this entanglement imposes a severe context burden, causing agents to forget initial requirements, hallucinate progress, or repeatedly interact with stale interfaces. To address this, we introduce Task-State Representation (TSR), a training-free framework that explicitly decouples task state from sensory input. Acting as a lightweight external wrapper, TSR maintains three structured components: a global instruction summary, a dynamic progress tracker for subgoals, and a transition-aware action verifier. By continuously updating through pre- and post-action visual comparisons, TSR effectively guides the agent's reasoning without requiring architectural modifications. Experiments across four mobile GUI benchmarks validate TSR's effectiveness, yielding up to a 12 absolute point increase in success rate on complex cross-application and memory-intensive tasks.

Large Language Models (LLMs) are increasingly integrated into code editors to provide AI-powered code suggestions. Yet many of these suggestions are ignored, resulting in wasted computation, increased latency, and unnecessary interruptions. We introduce a lightweight pre-filtering model that predicts the likelihood of suggestion acceptance before invoking the LLM, using only real-time developer telemetry such as typing speed, file navigation, and editing activity. Deployed in a production-grade Visual Studio Code plugin over four months of naturalistic use, our approach nearly doubled acceptance rates (18.4% -> 34.2%) while suppressing 35% of low-value LLM calls. These findings demonstrate that behavioral signals alone can meaningfully improve both user experience and system efficiency in LLM-assisted programming, highlighting the value of timing-aware, privacy-preserving adaptation mechanisms. The filter operates solely on pre-invocation editor telemetry and never inspects code or prompts.

We present FEAR, a family of fast, efficient, accurate, and robust Siamese visual trackers. We present a novel and efficient way to benefit from dual-template representation for object model adaption, which incorporates temporal information with only a single learnable parameter. We further improve the tracker architecture with a pixel-wise fusion block. By plugging-in sophisticated backbones with the abovementioned modules, FEAR-M and FEAR-L trackers surpass most Siamese trackers on several academic benchmarks in both accuracy and efficiency. Employed with the lightweight backbone, the optimized version FEAR-XS offers more than 10 times faster tracking than current Siamese trackers while maintaining near state-of-the-art results. FEAR-XS tracker is 2.4x smaller and 4.3x faster than LightTrack with superior accuracy. In addition, we expand the definition of the model efficiency by introducing FEAR benchmark that assesses energy consumption and execution speed. We show that energy consumption is a limiting factor for trackers on mobile devices. Source code, pretrained models, and evaluation protocol are available at https://github.com/PinataFarms/FEARTracker.

Agent Skills package reusable instructions and assets for tool-using language-model agents. Progressive loading creates failure boundaries poorly represented by session-, model-, or tool-centric traces: a Skill can be discovered but not activated, activated without instructions, or appear successful without an independently verified outcome. We present Skill Runtime Intelligence, a passive runtime-intelligence system that reconstructs supported Skill-lifecycle stages across heterogeneous harnesses while preserving unsupported stages as unknown. Its Run Panorama separates immutable events, deterministic relations, inferred diagnoses, and controlled outcomes with four evidence grades; optional trace import and OTLP/HTTP export support existing observability deployments. Across six frozen repository profiles, three coding agents, and seven clean or fault-injected conditions, all 126 executions preserve source worktrees and each correlates to exactly one source session. Yet adapters expose three distinct semantics: no Skill runs; complete runs but no failure-like events; or failure-like events in every operational-failure and clean session. In a seven-template diagnostic study, semantic aliases and Panorama localize the same six non-clean boundaries but differ in exact/status behavior; both Raw views emit a failure status on all 18 clean cases, while Panorama emits none. A known-rule graph conforms to 126/126 frozen contracts, whereas a second model completes only 228/378 calls. These observations motivate executable adapter qualification and show that event presence is not boundary fidelity, composite exact scores mask distinct errors, and model explanations must not overwrite deterministic facts.

Multi-object tracking (MOT) has traditionally focused on estimating trajectories of all objects in a video, without selectively reasoning about user-specified targets under semantic instructions. In this work, we introduce a query-driven tracking paradigm that formulates tracking as a spatiotemporal reasoning problem conditioned on natural language queries. Given a reference frame, a video sequence, and a textual query, the goal is to localize and track only the target(s) specified in the query while maintaining temporal coherence and identity consistency. To support this setting, we construct RMOT26, a large-scale benchmark with grounded queries and sequence-level splits to prevent identity leakage and enable robust evaluation of generalization. We further present QTrack, an end-to-end vision-language model that integrates multimodal reasoning with tracking-oriented localization. Additionally, we introduce a Temporal Perception-Aware Policy Optimization strategy with structured rewards to encourage motion-aware reasoning. Extensive experiments demonstrate the effectiveness of our approach for reasoning-centric, language-guided tracking. Code and data are available at https://github.com/gaash-lab/QTrack

Visual object tracking aims to continuously locate specific targets within sequential frames, evolving from single-modal methods to multi-modal ones. However, existing multi-modal trackers are typically designed for fixed modality combinations, requiring separate models for different inputs. This leads to a poor adaptability to missing or imperfect modalities, and limited generalization. To address these issues, we propose a novel unified framework called AnyTrack for object tracking with any modalities. Specifically, we design a Modality-aware Interaction Module (MIM) to facilitate dynamic interaction across diverse modalities. This module bridges modality discrepancies and aggregates temporal cues to maintain spatio-temporal consistency during cross-modal interaction. Furthermore, we introduce a Context Understanding Module (CUM) to establish spatial correspondence between visual features and target locations via global-local prompts. This module employs target-aware context modeling to enhance foreground-background discrimination for precise localization. Finally, to support the training and evaluation under diverse modalities, we extend existing multi-modal object tracking benchmarks by incorporating grayscale images, language descriptions, and audio clips. Extensive experiments with both complete and missing modality settings demonstrate that our AnyTrack achieves state-of-the-art performance, validating its effectiveness and flexibility. The source code is available at https://github.com/IdolLab/AnyTrack.

Tool-augmented LLM agents raise new security risks: tool executions can introduce runtime-only behaviors, including prompt injection and unintended exposure of external inputs (e.g., environment secrets or local files). While existing scanners often focus on static artifacts, analyzing runtime behavior is challenging because directly executing untrusted tools can itself be dangerous. We present MCP-SandboxScan, a lightweight framework motivated by the Model Context Protocol (MCP) that safely executes untrusted tools inside a WebAssembly/WASI sandbox and produces auditable reports of external-to-sink exposures. Our prototype (i) extracts LLM-relevant sinks from runtime outputs (prompt/messages and structured tool-return fields), (ii) instantiates external-input candidates from environment values, mounted file contents, and output-surfaced HTTP fetch intents, and (iii) links sources to sinks via snippet-based substring matching. Case studies on three representative tools show that MCP-SandboxScan can surface provenance evidence when external inputs appear in prompt/messages or tool-return payloads, and can expose filesystem capability violations as runtime evidence. We further compare against a lightweight static string-signature baseline and use a micro-benchmark to characterize false negatives under transformations and false positives from short-token collisions.

Scripting interfaces enable users to automate tasks and customize software workflows, but creating scripts traditionally requires programming expertise and familiarity with specific APIs, posing barriers for many users. While Large Language Models (LLMs) can generate code from natural language queries, runtime code generation is severely limited due to unverified code, security risks, longer response times, and higher computational costs. To bridge the gap, we propose an offline simulation framework to curate a software-specific skillset, a collection of verified scripts, by exploiting LLMs and publicly available scripting guides. Our framework comprises two components: (1) task creation, using top-down functionality guidance and bottom-up API synergy exploration to generate helpful tasks; and (2) skill generation with trials, refining and validating scripts based on execution feedback. To efficiently navigate the extensive API landscape, we introduce a Graph Neural Network (GNN)-based link prediction model to capture API synergy, enabling the generation of skills involving underutilized APIs and expanding the skillset's diversity. Experiments with Adobe Illustrator demonstrate that our framework significantly improves automation success rates, reduces response time, and saves runtime token costs compared to traditional runtime code generation. This is the first attempt to use software scripting interfaces as a testbed for LLM-based systems, highlighting the advantages of leveraging execution feedback in a controlled environment and offering valuable insights into aligning AI capabilities with user needs in specialized software domains.

Code agents can autonomously resolve GitHub issues, yet when they fail, current evaluation provides no visibility into where or why. Metrics such as Pass@1 collapse an entire execution into a single binary outcome, making it difficult to identify where and why the agent went wrong. To address this limitation, we introduce TRAJEVAL, a diagnostic framework that decomposes agent trajectories into three interpretable stages: search (file localization), read (function comprehension), and edit (modification targeting). For each stage, we compute precision and recall by comparing against reference patches. Analyzing 16,758 trajectories across three agent architectures and seven models, we find universal inefficiencies (all agents examine approximately 22x more functions than necessary) yet distinct failure modes: GPT-5 locates relevant code but targets edits incorrectly, while Qwen-32B fails at file discovery entirely. We validate that these diagnostics are predictive, achieving model-level Pass@1 prediction within 0.87-2.1% MAE, and actionable: real-time feedback based on trajectory signals improves two state-of-the-art models by 2.2-4.6 percentage points while reducing costs by 20-31%. These results demonstrate that our framework not only provides a more fine-grained analysis of agent behavior, but also translates diagnostic signals into tangible performance gains. More broadly, TRAJEVAL transforms agent evaluation beyond outcome-based benchmarking toward mechanism-driven diagnosis of agent success and failure.

Most online multi-object trackers perform object detection stand-alone in a neural net without any input from tracking. In this paper, we present a new online joint detection and tracking model, TraDeS (TRAck to DEtect and Segment), exploiting tracking clues to assist detection end-to-end. TraDeS infers object tracking offset by a cost volume, which is used to propagate previous object features for improving current object detection and segmentation. Effectiveness and superiority of TraDeS are shown on 4 datasets, including MOT (2D tracking), nuScenes (3D tracking), MOTS and Youtube-VIS (instance segmentation tracking). Project page: https://jialianwu.com/projects/TraDeS.html.

Code agents are advancing rapidly, but debugging them is becoming increasingly difficult. As frameworks orchestrate parallel tool calls and multi-stage workflows over complex tasks, making the agent's state transitions and error propagation hard to observe. In these runs, an early misstep can trap the agent in unproductive loops or even cascade into fundamental errors, forming hidden error chains that make it hard to tell when the agent goes off track and why. Existing agent tracing analyses either focus on simple interaction or rely on small-scale manual inspection, which limits their scalability and usefulness for real coding workflows. We present CodeTracer, a tracing architecture that parses heterogeneous run artifacts through evolving extractors, reconstructs the full state transition history as a hierarchical trace tree with persistent memory, and performs failure onset localization to pinpoint the failure origin and its downstream chain. To enable systematic evaluation, we construct CodeTraceBench from a large collection of executed trajectories generated by four widely used code agent frameworks on diverse code tasks (e.g., bug fixing, refactoring, and terminal interaction), with supervision at both the stage and step levels for failure localization. Experiments show that CodeTracer substantially outperforms direct prompting and lightweight baselines, and that replaying its diagnostic signals consistently recovers originally failed runs under matched budgets. Our code and data are publicly available.

Cell tracking is a ubiquitous image analysis task in live-cell microscopy. Unlike multiple object tracking (MOT) for natural images, cell tracking typically involves hundreds of similar-looking objects that can divide in each frame, making it a particularly challenging problem. Current state-of-the-art approaches follow the tracking-by-detection paradigm, i.e. first all cells are detected per frame and successively linked in a second step to form biologically consistent cell tracks. Linking is commonly solved via discrete optimization methods, which require manual tuning of hyperparameters for each dataset and are therefore cumbersome to use in practice. Here we propose Trackastra, a general purpose cell tracking approach that uses a simple transformer architecture to directly learn pairwise associations of cells within a temporal window from annotated data. Importantly, unlike existing transformer-based MOT pipelines, our learning architecture also accounts for dividing objects such as cells and allows for accurate tracking even with simple greedy linking, thus making strides towards removing the requirement for a complex linking step. The proposed architecture operates on the full spatio-temporal context of detections within a time window by avoiding the computational burden of processing dense images. We show that our tracking approach performs on par with or better than highly tuned state-of-the-art cell tracking algorithms for various biological datasets, such as bacteria, cell cultures and fluorescent particles. We provide code at https://github.com/weigertlab/trackastra.

Tracking often uses a multi-stage pipeline of feature extraction, target information integration, and bounding box estimation. To simplify this pipeline and unify the process of feature extraction and target information integration, we present a compact tracking framework, termed as MixFormer, built upon transformers. Our core design is to utilize the flexibility of attention operations, and propose a Mixed Attention Module (MAM) for simultaneous feature extraction and target information integration. This synchronous modeling scheme allows to extract target-specific discriminative features and perform extensive communication between target and search area. Based on MAM, we build our MixFormer tracking framework simply by stacking multiple MAMs with progressive patch embedding and placing a localization head on top. In addition, to handle multiple target templates during online tracking, we devise an asymmetric attention scheme in MAM to reduce computational cost, and propose an effective score prediction module to select high-quality templates. Our MixFormer sets a new state-of-the-art performance on five tracking benchmarks, including LaSOT, TrackingNet, VOT2020, GOT-10k, and UAV123. In particular, our MixFormer-L achieves NP score of 79.9% on LaSOT, 88.9% on TrackingNet and EAO of 0.555 on VOT2020. We also perform in-depth ablation studies to demonstrate the effectiveness of simultaneous feature extraction and information integration. Code and trained models are publicly available at https://github.com/MCG-NJU/MixFormer.

Security of Android devices is now paramount, given their wide adoption among consumers. As researchers develop tools for statically or dynamically detecting suspicious apps, malware writers regularly update their attack mechanisms to hide malicious behavior implementation. This poses two problems to current research techniques: static analysis approaches, given their over-approximations, can report an overwhelming number of false alarms, while dynamic approaches will miss those behaviors that are hidden through evasion techniques. We propose in this work a static approach specifically targeted at highlighting hidden sensitive operations, mainly sensitive data flows. The prototype version of HiSenDroid has been evaluated on a large-scale dataset of thousands of malware and goodware samples on which it successfully revealed anti-analysis code snippets aiming at evading detection by dynamic analysis. We further experimentally show that, with FlowDroid, some of the hidden sensitive behaviors would eventually lead to private data leaks. Those leaks would have been hard to spot either manually among the large number of false positives reported by the state of the art static analyzers, or by dynamic tools. Overall, by putting the light on hidden sensitive operations, HiSenDroid helps security analysts in validating potential sensitive data operations, which would be previously unnoticed.

Web AI agents such as ChatGPT Agent and GenSpark are increasingly used for routine web-based tasks, yet they still rely on text-based input prompts, lack proactive detection of user intent, and offer no support for interactive data analysis and decision making. We present WebSeek, a mixed-initiative browser extension that enables users to discover and extract information from webpages to then flexibly build, transform, and refine tangible data artifacts-such as tables, lists, and visualizations-all within an interactive canvas. Within this environment, users can perform analysis-including data transformations such as joining tables or creating visualizations-while an in-built AI both proactively offers context-aware guidance and automation, and reactively responds to explicit user requests. An exploratory user study (N=15) with WebSeek as a probe reveals participants' diverse analysis strategies, underscoring their desire for transparency and control during human-AI collaboration.

Multi-Object Tracking (MOT) has been notoriously difficult to evaluate. Previous metrics overemphasize the importance of either detection or association. To address this, we present a novel MOT evaluation metric, HOTA (Higher Order Tracking Accuracy), which explicitly balances the effect of performing accurate detection, association and localization into a single unified metric for comparing trackers. HOTA decomposes into a family of sub-metrics which are able to evaluate each of five basic error types separately, which enables clear analysis of tracking performance. We evaluate the effectiveness of HOTA on the MOTChallenge benchmark, and show that it is able to capture important aspects of MOT performance not previously taken into account by established metrics. Furthermore, we show HOTA scores better align with human visual evaluation of tracking performance.

We investigate the application of ByteTrack in the realm of multiple object tracking. ByteTrack, a simple tracking algorithm, enables the simultaneous tracking of multiple objects by strategically incorporating detections with a low confidence threshold. Conventionally, objects are initially associated with high confidence threshold detections. When the association between objects and detections becomes ambiguous, ByteTrack extends the association to lower confidence threshold detections. One notable drawback of the existing ByteTrack approach is its reliance on a fixed threshold to differentiate between high and low-confidence detections. In response to this limitation, we introduce a novel and adaptive approach. Our proposed method entails a dynamic adjustment of the confidence threshold, leveraging insights derived from overall detections. Through experimentation, we demonstrate the effectiveness of our adaptive confidence threshold technique while maintaining running time compared to ByteTrack.

The integration of event and tracking data has become essential for advanced analysis in soccer. However, synchronizing these two modalities remains a significant challenge due to temporal and spatial inaccuracies in manually recorded event timestamps. Existing synchronizers typically rely on annotated event locations, which themselves are prone to spatial errors and thus can distort synchronization results. To address this issue, we propose ELASTIC (Event-Location-AgnoSTIC synchronizer), a synchronization framework that only uses features derived from tracking data. ELASTIC also explicitly detects the end times of pass-like events and separates the detection of major and minor events, which improves the completeness of the synchronized output and reduces error cascade across events. We annotated the ground truth timestamps of 2,134 events from three Eredivisie matches to measure the synchronization accuracy, and the experimental results demonstrate that ELASTIC outperforms existing synchronizers by a large margin.

AI agents are increasingly asked to carry out work that spans minutes, hours, or longer. Yet the default model of agent behavior is continuous action: issuing tool calls, refreshing pages, searching for alternatives, or otherwise trying to force progress. This is the wrong approach for many long-running tasks, which are better served by a strategy of sustained attention. Instead, agents should monitor an environment, notice when an external event makes progress possible, then respond promptly without wasting resources while waiting. To measure progress on this class of tasks, we introduce SentinelBench, an open-source benchmark for time-evolving monitoring tasks. SentinelBench contains 100 tasks across 10 synthetic web environments, including email, calendars, finance, professional networking, and entertainment. Each environment exposes a live web interface and replays a scripted sequence of events, requiring agents to navigate and reason about web pages whose state shifts underfoot. SentinelBench measures task completion, reaction time, and resource use, exposing the tradeoff between responsiveness and cost. We report results across three models and two browser-agent harnesses, establishing performance baselines for future comparison and demonstrating how agent design choices can dramatically impact key metrics. Together, these results show that SentinelBench distinguishes meaningful differences in agent behavior.

While text-to-image models offer numerous benefits, they also pose significant societal risks. Detecting AI-generated images is crucial for mitigating these risks. Detection methods can be broadly categorized into passive and watermark-based approaches: passive detectors rely on artifacts present in AI-generated images, whereas watermark-based detectors proactively embed watermarks into such images. A key question is which type of detector performs better in terms of effectiveness, robustness, and efficiency. However, the current literature lacks a comprehensive understanding of this issue. In this work, we aim to bridge that gap by developing ImageDetectBench, the first comprehensive benchmark to compare the effectiveness, robustness, and efficiency of passive and watermark-based detectors. Our benchmark includes four datasets, each containing a mix of AI-generated and non-AI-generated images. We evaluate five passive detectors and four watermark-based detectors against eight types of common perturbations and three types of adversarial perturbations. Our benchmark results reveal several interesting findings. For instance, watermark-based detectors consistently outperform passive detectors, both in the presence and absence of perturbations. Based on these insights, we provide recommendations for detecting AI-generated images, e.g., when both types of detectors are applicable, watermark-based detectors should be the preferred choice. Our code and data are publicly available at https://github.com/moyangkuo/ImageDetectBench.git.

Understanding the dynamic behavior of computer programs during normal working conditions is an important task, which has multiple security benefits such as the development of behavior-based anomaly detection, vulnerability discovery, and patching. Existing works achieved this goal by collecting and analyzing various data including network traffic, system calls, instruction traces, etc. In this paper, we explore the use of a new type of data, performance counters, to analyze the dynamic behavior of programs. Using existing primitives, we develop a tool named perfextract to capture data from different performance counters for a program during its startup time, thus forming multiple time series to represent the dynamic behavior of the program. We analyze the collected data and develop a semi-supervised clustering algorithm that allows us to classify each program using its performance counter time series into a specific group and to identify the intrinsic behavior of that group. We carry out extensive experiments with 18 real-world programs that belong to 4 groups including web browsers, text editors, image viewers, and audio players. The experimental results show that the examined programs can be accurately differentiated based on their performance counter data regardless of whether programs are run in physical or virtual environments.

Smart contract transactions associated with security attacks often exhibit distinct behavioral patterns compared with historical benign transactions before the attacking events. While many runtime monitoring and guarding mechanisms have been proposed to validate invariants and stop anomalous transactions on the fly, the empirical effectiveness of the invariants used remains largely unexplored. In this paper, we studied 23 prevalent invariants of 8 categories, which are either deployed in high-profile protocols or endorsed by leading auditing firms and security experts. Using these well-established invariants as templates, we developed a tool Trace2Inv which dynamically generates new invariants customized for a given contract based on its historical transaction data. We evaluated Trace2Inv on 42 smart contracts that fell victim to 27 distinct exploits on the Ethereum blockchain. Our findings reveal that the most effective invariant guard alone can successfully block 18 of the 27 identified exploits with minimal gas overhead. Our analysis also shows that most of the invariants remain effective even when the experienced attackers attempt to bypass them. Additionally, we studied the possibility of combining multiple invariant guards, resulting in blocking up to 23 of the 27 benchmark exploits and achieving false positive rates as low as 0.32%. Trace2Inv outperforms current state-of-the-art works on smart contract invariant mining and transaction attack detection in terms of both practicality and accuracy. Though Trace2Inv is not primarily designed for transaction attack detection, it surprisingly found two previously unreported exploit transactions, earlier than any reported exploit transactions against the same victim contracts.

This paper addresses limitations in 3D tracking-by-detection methods, particularly in identifying legitimate trajectories and reducing state estimation drift in Kalman filters. Existing methods often use threshold-based filtering for detection scores, which can fail for distant and occluded objects, leading to false positives. To tackle this, we propose a novel track validity mechanism and multi-stage observational gating process, significantly reducing ghost tracks and enhancing tracking performance. Our method achieves a 29.47% improvement in Multi-Object Tracking Accuracy (MOTA) on the KITTI validation dataset with the Second detector. Additionally, a refined Kalman filter term reduces localization noise, improving higher-order tracking accuracy (HOTA) by 4.8%. The online framework, RobMOT, outperforms state-of-the-art methods across multiple detectors, with HOTA improvements of up to 3.92% on the KITTI testing dataset and 8.7% on the validation dataset, while achieving low identity switch scores. RobMOT excels in challenging scenarios, tracking distant objects and prolonged occlusions, with a 1.77% MOTA improvement on the Waymo Open dataset, and operates at a remarkable 3221 FPS on a single CPU, proving its efficiency for real-time multi-object tracking.

We present ProvenanceWidgets, a Javascript library of UI control elements such as radio buttons, checkboxes, and dropdowns to track and dynamically overlay a user's analytic provenance. These in situ overlays not only save screen space but also minimize the amount of time and effort needed to access the same information from elsewhere in the UI. In this paper, we discuss how we design modular UI control elements to track how often and how recently a user interacts with them and design visual overlays showing an aggregated summary as well as a detailed temporal history. We demonstrate the capability of ProvenanceWidgets by recreating three prior widget libraries: (1) Scented Widgets, (2) Phosphor objects, and (3) Dynamic Query Widgets. We also evaluated its expressiveness and conducted case studies with visualization developers to evaluate its effectiveness. We find that ProvenanceWidgets enables developers to implement custom provenance-tracking applications effectively. ProvenanceWidgets is available as open-source software at https://github.com/ProvenanceWidgets to help application developers build custom provenance-based systems.

Since autonomous coding agents generate complex behaviors at high-volume, we may want to use other LLMs to monitor actions to reduce the risk from dangerous misaligned behavior. To better understand the limitations of such monitors against the diverse attack strategies that a coding agent could use, we present SLEIGHT-Bench (Subtle Low-itEration Insight-Guided Harmful Transcripts), a benchmark of synthetic transcripts containing 40 attacks across 11 categories, each showing a coding agent covertly pursuing a harmful objective (e.g. weight exfiltration, credential theft, unmonitored rogue deployment). We find that 20 of 40 attacks are never caught by an Opus 4.6 monitor with extended thinking across 10 trials at a 1% false-positive rate, while the overall catch rate is 32%. We identify several evasion strategies such as exploiting model priors, user instruction ambiguity, and state manipulation, which facilitate creating attacks that evade frontier monitors. We also elicit stronger monitor performance using coding agents as monitors versus regular prompted monitors, and for some evasion strategies show improved catch rates with targeted monitor prompts. Our dataset and evaluation framework are available at https://github.com/safety-research/sleight-bench and https://huggingface.co/datasets/sleightbench/SLEIGHT-Bench.

We study pursuit-evasion games in highly occluded urban environments, e.g. tall buildings in a city, where a scout (quadrotor) tracks multiple dynamic targets on the ground. We show that we can build a neural radiance field (NeRF) representation of the city -- online -- using RGB and depth images from different vantage points. This representation is used to calculate the information gain to both explore unknown parts of the city and track the targets -- thereby giving a completely first-principles approach to actively tracking dynamic targets. We demonstrate, using a custom-built simulator using Open Street Maps data of Philadelphia and New York City, that we can explore and locate 20 stationary targets within 300 steps. This is slower than a greedy baseline, which does not use active perception. But for dynamic targets that actively hide behind occlusions, we show that our approach maintains, at worst, a tracking error of 200m; the greedy baseline can have a tracking error as large as 600m. We observe a number of interesting properties in the scout's policies, e.g., it switches its attention to track a different target periodically, as the quality of the NeRF representation improves over time, the scout also becomes better in terms of target tracking. Code is available at https://github.com/grasp-lyrl/ActiveScout.

Agent benchmarks often evaluate only final answers even when agents run on stateful runtimes. We argue this under-specifies what is being evaluated: the proper unit is a declared model-plus-runtime configuration whose failures can occur in evidence acquisition, runtime routing, safety boundaries, or repeated execution. We present ClawProBench, a trace-aware benchmark for runtime-native agent evaluation instantiated on OpenClaw, a live agent runtime with workspace tools and native surfaces for browsing, memory, messaging, scheduling, skills, and subagents. ClawProBench defines two tracks: a 102-scenario full profile with live workspace and native-runtime routing tasks, and a frozen 68-scenario holdout with closed-world JSON output contracts for robust ranking. Trials are scored from execution traces via a safety-gated formula combining correctness, process quality, and efficiency, preserving failure evidence for audit. Our anonymous artifact includes benchmark definitions, scoring code, manifests and sanitized traces. We evaluate 68 configurations on the full profile and 37 on holdout. The top safety-gated average trace score is 0.7671. Native-runtime tasks underperform workspace-live tasks (0.5238 vs. 0.6415). On holdout, pass@k-any outperforms strict three-trial pass (0.6638 vs. 0.2890), while full-profile and holdout rankings show weak alignment (Spearman 0.1300). Rankings based purely on correctness differ substantially from process-aware, safety-gated and strict-pass views. Final-answer leaderboards may hide native-surface weaknesses, one-off successes and trace-local agent failure modes.

Temporal information is crucial for visual tracking, but existing multi-frame trackers are vulnerable to model drift caused by naively aggregating noisy historical predictions. In this paper, we introduce DTPTrack, a lightweight and generalizable module designed to be seamlessly integrated into existing trackers to suppress drift. Our framework consists of two core components: (1) a Temporal Reliability Calibrator (TRC) mechanism that learns to assign a per-frame reliability score to historical states, filtering out noise while anchoring on the ground-truth template; and (2) a Temporal Guidance Synthesizer (TGS) module that synthesizes this calibrated history into a compact set of dynamic temporal priors to provide predictive guidance. To demonstrate its versatility, we integrate DTPTrack into three diverse tracking architectures--OSTrack, ODTrack, and LoRAT-and show consistent, significant performance gains across all baselines. Our best-performing model, built upon an extended LoRATv2 backbone, sets a new state-of-the-art on several benchmarks, achieving a 77.5% Success rate on LaSOT and an 80.3% AO on GOT-10k.

Experiment trackers show how training is progressing, but changing a live run still usually requires trainer-specific code. We present Interactive Training 2, an open-source control plane for steering training through a shared protocol. Training applications declare which settings and actions they expose, humans and automated controllers submit requests through the same interface, and the training loop validates and applies them at safe control points. A customized Aim workspace combines live metrics and controls with a chronological record of requests and outcomes. We demonstrate the system across five NLP and reinforcement-learning workflows. The released code and traces provide a reusable foundation for auditable human- and agent-guided training.

Autonomous UI agents powered by AI have tremendous potential to boost human productivity by automating routine tasks such as filing taxes and paying bills. However, a major challenge in unlocking their full potential is security, which is exacerbated by the agent's ability to take action on their user's behalf. Existing tests for prompt injections in web agents either over-simplify the threat by testing unrealistic scenarios or giving the attacker too much power, or look at single-step isolated tasks. To more accurately measure progress for secure web agents, we introduce WASP -- a new publicly available benchmark for end-to-end evaluation of Web Agent Security against Prompt injection attacks. Evaluating with WASP shows that even top-tier AI models, including those with advanced reasoning capabilities, can be deceived by simple, low-effort human-written injections in very realistic scenarios. Our end-to-end evaluation reveals a previously unobserved insight: while attacks partially succeed in up to 86% of the case, even state-of-the-art agents often struggle to fully complete the attacker goals -- highlighting the current state of security by incompetence.

We introduce MacroBench, a code-first benchmark that evaluates whether LLMs can synthesize reusable browser-automation programs (macros) from natural-language goals by reading HTML/DOM and emitting Selenium. MacroBench instantiates seven self-hosted sites covering 681 tasks across interaction complexity and targeting difficulty. Our end-to-end protocol validates generated code via static checks, sandboxed execution, and outcome verification (DOM assertions, database snapshots), and includes a safety suite for scraping, spam/abuse, and credential/privacy prompts. Across 2,636 model-task runs, we observe stratified success: GPT-4o-mini (96.8%), GPT-4o (95.3%), Gemini (89.0%), DeepSeek (83.4%). Models handle simple tasks reliably (91.7%) but fail on complex workflows (0.0%), and none meet production-quality coding practices despite functional completion. We release our complete benchmark pipeline, evaluation framework, and experimental results at https://github.com/hyunjun1121/MacroBench to enable reproducible assessment of macro synthesis for web automation.

Computer-use agents pay full frontier inference to re-derive routines their user has already performed, because an agent's memory today records what the user said, not what the user did. We compile passively captured screen activity into agent memory with a deterministic, zero-model pipeline: it segments a local capture stream into typed activity frames, bounded episodes carrying application, site, timing, input volume, and evidence pointers back to the raw rows, with no model in the loop, so the output is byte-identical, cacheable, and mechanically auditable. On one professional's single-user corpus of 128,756 frames over 51 active days, the compiler reduces a day of raw capture to a prompt-ready context block 86x smaller in 68 ms, and an agent reading that block answers questions about the day at 98.4% accuracy (Wilson 95% CI 91.7-99.7%) against an independent oracle, versus 66-80% for an LLM summary of the same capture, a mid-tier model reading the block matching a frontier one. The same compiler doubles as a demand-side cost instrument. Read off passive, pre-delegation human activity rather than agent rollouts, it supplies two parameters that agent-cost models assume but, to our knowledge, have not measured: the Routine Overhead Ratio R and the routine recurrence h. We report first values of R, a modeled upper bound, at 60-343x, and a delegable recurrence of 9.0% in-sample and 7.7% out-of-sample, for a realistic all-fleet token ceiling near 8%; a compiled routine replays deterministically with the model out of the loop, demonstrated live at zero model tokens on a guard-matched hit. Schema, compiler, and evaluation harness are open.

Despite great recent advances in visual tracking, its further development, including both algorithm design and evaluation, is limited due to lack of dedicated large-scale benchmarks. To address this problem, we present LaSOT, a high-quality Large-scale Single Object Tracking benchmark. LaSOT contains a diverse selection of 85 object classes, and offers 1,550 totaling more than 3.87 million frames. Each video frame is carefully and manually annotated with a bounding box. This makes LaSOT, to our knowledge, the largest densely annotated tracking benchmark. Our goal in releasing LaSOT is to provide a dedicated high quality platform for both training and evaluation of trackers. The average video length of LaSOT is around 2,500 frames, where each video contains various challenge factors that exist in real world video footage,such as the targets disappearing and re-appearing. These longer video lengths allow for the assessment of long-term trackers. To take advantage of the close connection between visual appearance and natural language, we provide language specification for each video in LaSOT. We believe such additions will allow for future research to use linguistic features to improve tracking. Two protocols, full-overlap and one-shot, are designated for flexible assessment of trackers. We extensively evaluate 48 baseline trackers on LaSOT with in-depth analysis, and results reveal that there still exists significant room for improvement. The complete benchmark, tracking results as well as analysis are available at http://vision.cs.stonybrook.edu/~lasot/.

Most existing pre-trained language models for source code focus on learning the static code text, typically augmented with static code structures (abstract syntax tree, dependency graphs, etc.). However, program semantics will not be fully exposed before the real execution. Without an understanding of the program execution, statically pre-trained models fail to comprehensively capture the dynamic code properties, such as the branch coverage and the runtime variable values, and they are consequently less effective at code understanding tasks, such as retrieving semantic clones and detecting software vulnerabilities. To close the gap between the static nature of language models and the dynamic characteristics of programs, we introduce TRACED, an execution-aware pre-training strategy for source code. Specifically, we pre-train code language models with a combination of source code, executable inputs, and corresponding execution traces. Our goal is to teach code models the complicated execution logic during the pre-training, enabling the model to statically estimate the dynamic code properties without repeatedly executing code during task-specific fine-tuning. To illustrate the effectiveness of our proposed approach, we fine-tune and evaluate TRACED on three downstream tasks: static execution estimation, clone retrieval, and vulnerability detection. The empirical results show that TRACED relatively improves the statically pre-trained code models by 12.4% for complete execution path prediction and by 25.2% for runtime variable value predictions. TRACED also significantly outperforms statically pre-trained models in clone retrieval and vulnerability detection across four public benchmarks.

Segment Anything 2 (SAM2) enables robust single-object tracking using segmentation. To extend this to multi-object tracking (MOT), we propose SAM2MOT, introducing a novel Tracking by Segmentation paradigm. Unlike Tracking by Detection or Tracking by Query, SAM2MOT directly generates tracking boxes from segmentation masks, reducing reliance on detection accuracy. SAM2MOT has two key advantages: zero-shot generalization, allowing it to work across datasets without fine-tuning, and strong object association, inherited from SAM2. To further improve performance, we integrate a trajectory manager system for precise object addition and removal, and a cross-object interaction module to handle occlusions. Experiments on DanceTrack, UAVDT, and BDD100K show state-of-the-art results. Notably, SAM2MOT outperforms existing methods on DanceTrack by +2.1 HOTA and +4.5 IDF1, highlighting its effectiveness in MOT. Code is available at https://github.com/TripleJoy/SAM2MOT.

In this work, we propose an approach for collecting completion usage logs from the users in an IDE and using them to train a machine learning based model for ranking completion candidates. We developed a set of features that describe completion candidates and their context, and deployed their anonymized collection in the Early Access Program of IntelliJ-based IDEs. We used the logs to collect a dataset of code completions from users, and employed it to train a ranking CatBoost model. Then, we evaluated it in two settings: on a held-out set of the collected completions and in a separate A/B test on two different groups of users in the IDE. Our evaluation shows that using a simple ranking model trained on the past user behavior logs significantly improved code completion experience. Compared to the default heuristics-based ranking, our model demonstrated a decrease in the number of typing actions necessary to perform the completion in the IDE from 2.073 to 1.832. The approach adheres to privacy requirements and legal constraints, since it does not require collecting personal information, performing all the necessary anonymization on the client's side. Importantly, it can be improved continuously: implementing new features, collecting new data, and evaluating new models - this way, we have been using it in production since the end of 2020.

Large language models (LLMs) are increasingly asked not only to write static interfaces, but to construct executable interactive worlds from natural language. Browser-native 3D, commonly built with Three.js, is a natural next frontier: generated programs must integrate assets, obey spatial and physical constraints, and keep user-facing controls synchronized with hidden runtime state. Existing web-generation benchmarks and evaluators, however, largely observe only pixels or DOM nodes, while the mechanics of a Three.js world unfold inside an opaque <canvas>. We introduce WorldCoder-Bench, a benchmark for autonomous, physically grounded 3D world synthesis. WorldCoder-Bench contains 2,026 expert-curated tasks across Simulation, Rendering, and Application scenarios, with optional .glb assets and hidden behavioral contracts. We further propose StateProbe, an execution-based protocol that probes generated programs in a sandboxed browser and verifies hidden, mutation-hardened contracts over runtime states and transitions. Beyond verification coverage, we report Return on Automation and Time Efficiency Multiplier to measure correctness-adjusted cost and time savings. Across nine frontier models, the best system reaches only 27.8% verification coverage on WorldCoder-Core and 19.9% on WorldCoder-Robust, with failures dominated by state-schema drift and broken interaction chains rather than missing scene elements. Utility metrics further show that cheap or fast models can still provide substantial value on easier domains. WorldCoder-Bench is available at https://anonymous.4open.science/r/WorldCoder-Bench/.

Computer-use agents provide a promising path toward general software automation because they can interact directly with arbitrary graphical user interfaces instead of relying on brittle, application-specific integrations. Despite recent advances in benchmark performance, strong computer-use agents remain expensive and slow in practice, since most systems invoke large multimodal models at nearly every interaction step. We argue that this uniform allocation of compute is fundamentally inefficient for long-horizon GUI tasks. Such trajectories are highly heterogeneous: many steps are routine and can be handled reliably by smaller, cheaper policies, while errors tend to concentrate at a relatively small number of high-risk moments. Across computer-use benchmarks, these failures repeatedly take two forms: progress stalls, where the agent loops, repeats ineffective actions, or fails to make meaningful progress, and silent semantic drift, where the agent continues taking locally plausible actions after already deviating from the user's true goal. To address this inefficiency, we propose an event-driven, step-level cascade for computer-use agents that runs a small policy by default and escalates to a stronger model only when lightweight learned monitors detect elevated risk. Our framework combines two complementary signals: a Stuck Monitor that detects degraded progress from recent reasoning-action history and triggers recovery, and a Milestone Monitor that identifies semantically meaningful checkpoints where sparse verification is most informative for catching drift. This design turns always-on frontier-model inference into adaptive, on-demand compute allocation over the course of an evolving interaction. The framework is modular and deployment-oriented: it can be layered on top of existing computer-use agents without changing the underlying agent architecture or retraining the large model.

Multi-object tracking aims to maintain object identities over time by associating detections across video frames. Two dominant paradigms exist in literature: tracking-by-detection methods, which are computationally efficient but rely on handcrafted association heuristics, and end-to-end approaches, which learn association from data at the cost of higher computational complexity. We propose Track-Detection Link Prediction (TDLP), a tracking-by-detection method that performs per-frame association via link prediction between tracks and detections, i.e., by predicting the correct continuation of each track at every frame. TDLP is architecturally designed primarily for geometric features such as bounding boxes, while optionally incorporating additional cues, including pose and appearance. Unlike heuristic-based methods, TDLP learns association directly from data without handcrafted rules, while remaining modular and computationally efficient compared to end-to-end trackers. Extensive experiments on multiple benchmarks demonstrate that TDLP consistently surpasses state-of-the-art performance across both tracking-by-detection and end-to-end methods. Finally, we provide a detailed analysis comparing link prediction with metric learning-based association and show that link prediction is more effective, particularly when handling heterogeneous features such as detection bounding boxes. Our code is available at https://github.com/Robotmurlock/TDLP{https://github.com/Robotmurlock/TDLP}.

One-stream Transformer-based trackers achieve advanced performance in visual object tracking but suffer from significant computational overhead that hinders real-time deployment. While token pruning offers a path to efficiency, existing methods are fragmented. They typically prune the search region, dynamic template, and static template in isolation, overlooking critical inter-component dependencies, which yields suboptimal pruning and degraded accuracy. To address this, we introduce UTPTrack, a simple and Unified Token Pruning framework that, for the first time, jointly compresses all three components. UTPTrack employs an attention-guided, token type-aware strategy to holistically model redundancy, a design that seamlessly supports unified tracking across multimodal and language-guided tasks within a single model. Extensive evaluations on 10 benchmarks demonstrate that UTPTrack achieves a new state-of-the-art in the accuracy-efficiency trade-off for pruning-based trackers, pruning 65.4% of vision tokens in RGB-based tracking and 67.5% in unified tracking while preserving 99.7% and 100.5% of baseline performance, respectively. This strong performance across both RGB and multimodal scenarios underlines its potential as a robust foundation for future research in efficient visual tracking. Code will be released at https://github.com/EIT-NLP/UTPTrack.

Background: Some developer activity traditionally performed manually, such as making code commits, opening, managing, or closing issues is increasingly subject to automation in many OSS projects. Specifically, such activity is often performed by tools that react to events or run at specific times. We refer to such automation tools as bots and, in many software mining scenarios related to developer productivity or code quality it is desirable to identify bots in order to separate their actions from actions of individuals. Aim: Find an automated way of identifying bots and code committed by these bots, and to characterize the types of bots based on their activity patterns. Method and Result: We propose BIMAN, a systematic approach to detect bots using author names, commit messages, files modified by the commit, and projects associated with the ommits. For our test data, the value for AUC-ROC was 0.9. We also characterized these bots based on the time patterns of their code commits and the types of files modified, and found that they primarily work with documentation files and web pages, and these files are most prevalent in HTML and JavaScript ecosystems. We have compiled a shareable dataset containing detailed information about 461 bots we found (all of whom have more than 1000 commits) and 13,762,430 commits they created.

The goal of multi-object tracking (MOT) is detecting and tracking all the objects in a scene, while keeping a unique identifier for each object. In this paper, we present a new robust state-of-the-art tracker, which can combine the advantages of motion and appearance information, along with camera-motion compensation, and a more accurate Kalman filter state vector. Our new trackers BoT-SORT, and BoT-SORT-ReID rank first in the datasets of MOTChallenge [29, 11] on both MOT17 and MOT20 test sets, in terms of all the main MOT metrics: MOTA, IDF1, and HOTA. For MOT17: 80.5 MOTA, 80.2 IDF1, and 65.0 HOTA are achieved. The source code and the pre-trained models are available at https://github.com/NirAharon/BOT-SORT

LLM-based agents are rapidly being adopted across diverse domains. Since they interact with users without supervision, they must be tested extensively. Current testing approaches focus on acceptance-level evaluation from the user's perspective. While intuitive, these tests require manual evaluation, are difficult to automate, do not facilitate root cause analysis, and incur expensive test environments. In this paper, we present methods to enable structural testing of LLM-based agents. Our approach utilizes traces (based on OpenTelemetry) to capture agent trajectories, employs mocking to enforce reproducible LLM behavior, and adds assertions to automate test verification. This enables testing agent components and interactions at a deeper technical level within automated workflows. We demonstrate how structural testing enables the adaptation of software engineering best practices to agents, including the test automation pyramid, regression testing, test-driven development, and multi-language testing. In representative case studies, we demonstrate automated execution and faster root-cause analysis. Collectively, these methods reduce testing costs and improve agent quality through higher coverage, reusability, and earlier defect detection. We provide an open source reference implementation on GitHub.

Recent years have seen substantial progress in diffusion-based controllable video generation. However, achieving precise control in complex scenarios, including fine-grained object parts, sophisticated motion trajectories, and coherent background movement, remains a challenge. In this paper, we introduce TrackGo, a novel approach that leverages free-form masks and arrows for conditional video generation. This method offers users with a flexible and precise mechanism for manipulating video content. We also propose the TrackAdapter for control implementation, an efficient and lightweight adapter designed to be seamlessly integrated into the temporal self-attention layers of a pretrained video generation model. This design leverages our observation that the attention map of these layers can accurately activate regions corresponding to motion in videos. Our experimental results demonstrate that our new approach, enhanced by the TrackAdapter, achieves state-of-the-art performance on key metrics such as FVD, FID, and ObjMC scores. The project page of TrackGo can be found at: https://zhtjtcz.github.io/TrackGo-Page/

Visual object tracking (VOT) has been widely adopted in mission-critical applications, such as autonomous driving and intelligent surveillance systems. In current practice, third-party resources such as datasets, backbone networks, and training platforms are frequently used to train high-performance VOT models. Whilst these resources bring certain convenience, they also introduce new security threats into VOT models. In this paper, we reveal such a threat where an adversary can easily implant hidden backdoors into VOT models by tempering with the training process. Specifically, we propose a simple yet effective few-shot backdoor attack (FSBA) that optimizes two losses alternately: 1) a feature loss defined in the hidden feature space, and 2) the standard tracking loss. We show that, once the backdoor is embedded into the target model by our FSBA, it can trick the model to lose track of specific objects even when the trigger only appears in one or a few frames. We examine our attack in both digital and physical-world settings and show that it can significantly degrade the performance of state-of-the-art VOT trackers. We also show that our attack is resistant to potential defenses, highlighting the vulnerability of VOT models to potential backdoor attacks.

This report presents a framework called Segment And Track Anything (SAMTrack) that allows users to precisely and effectively segment and track any object in a video. Additionally, SAM-Track employs multimodal interaction methods that enable users to select multiple objects in videos for tracking, corresponding to their specific requirements. These interaction methods comprise click, stroke, and text, each possessing unique benefits and capable of being employed in combination. As a result, SAM-Track can be used across an array of fields, ranging from drone technology, autonomous driving, medical imaging, augmented reality, to biological analysis. SAM-Track amalgamates Segment Anything Model (SAM), an interactive key-frame segmentation model, with our proposed AOT-based tracking model (DeAOT), which secured 1st place in four tracks of the VOT 2022 challenge, to facilitate object tracking in video. In addition, SAM-Track incorporates Grounding-DINO, which enables the framework to support text-based interaction. We have demonstrated the remarkable capabilities of SAM-Track on DAVIS-2016 Val (92.0%), DAVIS-2017 Test (79.2%)and its practicability in diverse applications. The project page is available at: https://github.com/z-x-yang/Segment-and-Track-Anything.

As Large Language Model (LLM) agents increasingly execute complex, autonomous software engineering tasks, developers rely on natural language instruction files such as AGENTS.md to express project-specific coding conventions, tooling restrictions, and architectural boundaries. However, because these instructions remain passive text, agents frequently violate documented constraints due to context window saturation or conflicting local context. In autonomous settings without real-time human supervision, such violations rapidly compound into technical debt. To ground autonomous agents in repository constraints, we introduce ContextCov, a framework that transforms passive natural language instructions into executable guardrails. Unlike prompt-only or reflection-only compliance approaches, ContextCov compiles documented constraints into three complementary checks: static AST queries for code patterns, runtime shell shims that intercept prohibited commands, and architectural validators that enforce structural rules. Acting as an automated, continuous reviewer, ContextCov intercepts agent actions and returns immediate, reproducible violation traces, enabling self-correction before non-compliant changes are finalized. We evaluate ContextCov on SWE-bench Lite (12 repositories, 300 tasks). Compared to prompt-only and LLM reflection baselines, ContextCov achieves 88.3% constraint compliance (vs. 67.0% and 50.3%) with 3.4x lower feedback cost, while maintaining functional correctness. The source code and evaluation results are available at https://github.com/reSHARMA/ContextCov.

Proactive AI assistants continuously observe a user's activity and decide whether to provide new guidance or remain silent. They should provide appropriate guidance for the task, determine when to provide the next guidance based on task progress, and adjust the guidance level to the user's expertise and needs. Supporting these capabilities requires training and evaluation data that reflect procedural structure and capture how guidance should adapt to task progress and user needs. However, existing datasets either focus on detection-based proactive understanding or provide procedural guidance at a fixed granularity. Fixed-granularity guidance provides limited information about fine-grained progress and broader procedural context, making it difficult to determine completion and adapt guidance granularity. To address these limitations, we introduce the ProactiveCoach suite, comprising ProactiveCoach-Instruct for training, ProactiveCoachBench for evaluation, and fine-tuned VLMs with an adaptive guidance system. ProactiveCoach-Instruct provides hierarchically structured guidance at the phase, step, and action levels for learning task progress and procedural context. ProactiveCoachBench evaluates whether models provide appropriate guidance at the right time across different guidance levels and adapt when the requested level changes. We fine-tune pretrained VLMs on ProactiveCoach-Instruct and demonstrate its effectiveness across backbones. Compared with fixed-granularity supervision, hierarchical supervision improves overall performance across backbones by up to 9.6%p. We further build an adaptive guidance system by combining our fine-tuned model with a lightweight guidance router. Without additional fine-tuning, our system outperforms the in-context adaptation baseline by 57.1%p across four guidance-level transitions. Our project page is available at https://jinsuby.github.io/ProactiveCoach/.

Multi-Object Tracking (MOT) has been a long-standing challenge in video understanding. A natural and intuitive approach is to split this task into two parts: object detection and association. Most mainstream methods employ meticulously crafted heuristic techniques to maintain trajectory information and compute cost matrices for object matching. Although these methods can achieve notable tracking performance, they often require a series of elaborate handcrafted modifications while facing complicated scenarios. We believe that manually assumed priors limit the method's adaptability and flexibility in learning optimal tracking capabilities from domain-specific data. Therefore, we introduce a new perspective that treats Multiple Object Tracking as an in-context ID Prediction task, transforming the aforementioned object association into an end-to-end trainable task. Based on this, we propose a simple yet effective method termed MOTIP. Given a set of trajectories carried with ID information, MOTIP directly decodes the ID labels for current detections to accomplish the association process. Without using tailored or sophisticated architectures, our method achieves state-of-the-art results across multiple benchmarks by solely leveraging object-level features as tracking cues. The simplicity and impressive results of MOTIP leave substantial room for future advancements, thereby making it a promising baseline for subsequent research. Our code and checkpoints are released at https://github.com/MCG-NJU/MOTIP.

Despite recent advances in image-to-video generation, better controllability and local animation are less explored. Most existing image-to-video methods are not locally aware and tend to move the entire scene. However, human artists may need to control the movement of different objects or regions. Additionally, current I2V methods require users not only to describe the target motion but also to provide redundant detailed descriptions of frame contents. These two issues hinder the practical utilization of current I2V tools. In this paper, we propose a practical framework, named Follow-Your-Click, to achieve image animation with a simple user click (for specifying what to move) and a short motion prompt (for specifying how to move). Technically, we propose the first-frame masking strategy, which significantly improves the video generation quality, and a motion-augmented module equipped with a short motion prompt dataset to improve the short prompt following abilities of our model. To further control the motion speed, we propose flow-based motion magnitude control to control the speed of target movement more precisely. Our framework has simpler yet precise user control and better generation performance than previous methods. Extensive experiments compared with 7 baselines, including both commercial tools and research methods on 8 metrics, suggest the superiority of our approach. Project Page: https://follow-your-click.github.io/

Computer Science education fundamentally depends on intensive laboratory hours to foster true programming mastery and logical reasoning. However, the widespread adoption of Generative Artificial Intelligence (AI) has made it virtually impossible to distinguish authentic student effort from instant AI code synthesis by evaluating final submissions alone. To preserve pedagogical integrity, educators must enforce authentic coding discipline, guiding students through unassisted, iterative development cycles. While centralized environments like JupyterHub provide instructors with a platform to host and monitor the learning process step-by-step, they introduce severe operational vulnerabilities; because Jupyter environments inherently allow arbitrary shell command execution, they expose the underlying shared host to unauthorized system manipulation and lateral movement. This paper presents VISMATIC, a secure, low-cost framework designed to resolve this tension between process-oriented monitoring and infrastructure security. By pairing robust environment isolation with explicit user-interaction tracking at the API level, VISMATIC captures authentic programming behaviors without exposing the underlying host system. Evaluation from a pilot student cohort demonstrates that our macro-level behavioral metrics successfully flag statistical anomalies indicative of automated or off-platform workflows while preserving student anonymity, offering a scalable blueprint for safeguarding educational discipline in the AI era.

Browser-using agents (BUAs) are an emerging class of AI agents that interact with web browsers in human-like ways, including clicking, scrolling, filling forms, and navigating across pages. While these agents help automate repetitive online tasks, they are vulnerable to prompt injection attacks that trick an agent into performing undesired actions, such as leaking private information or issuing unintended state-changing requests. We propose ceLLMate, a browser-level sandboxing framework that restricts the agent's ambient authority and reduces the blast radius of prompt injections. We address the semantic gap challenge that is fundamental to BUAs -- writing and enforcing security policies for low-level UI tools like clicks and keystrokes is brittle and error-prone. Our core insight is to perform sandboxing at the HTTP layer because all side-effecting UI operations will result in network communication to the website's backend. We implement ceLLMate as an agent-agnostic browser extension and demonstrate how it enables sandboxing policies that block prompt injection attacks in the WASP benchmark with 7.25--15% latency overhead.

Modern software infrastructure increasingly relies on LLM agents for development and maintenance, such as Claude Code and Gemini-cli. However, these AI agents differ fundamentally from traditional deterministic software, posing a significant challenge to conventional monitoring and debugging. This creates a critical semantic gap: existing tools observe either an agent's high-level intent (via LLM prompts) or its low-level actions (e.g., system calls), but cannot correlate these two views. This blindness makes it difficult to distinguish between benign operations, malicious attacks, and costly failures. We introduce AgentSight, an AgentOps observability framework that bridges this semantic gap using a hybrid approach. Our approach, boundary tracing, monitors agents from outside their application code at stable system interfaces using eBPF. AgentSight intercepts TLS-encrypted LLM traffic to extract semantic intent, monitors kernel events to observe system-wide effects, and causally correlates these two streams across process boundaries using a real-time engine and secondary LLM analysis. This instrumentation-free technique is framework-agnostic, resilient to rapid API changes, and incurs less than 3% performance overhead. Our evaluation shows AgentSight detects prompt injection attacks, identifies resource-wasting reasoning loops, and reveals hidden coordination bottlenecks in multi-agent systems. AgentSight is released as an open-source project at https://github.com/agent-sight/agentsight.

Software reverse engineering is an essential task in software engineering and security, but it can be a challenging process, especially for adversarial artifacts. To address this challenge, we present STraceBERT, a novel approach that utilizes a Java dynamic analysis tool to record calls to core Java libraries, and pretrain a BERT-style model on the recorded application traces for effective method source code retrieval from a candidate set. Our experiments demonstrate the effectiveness of STraceBERT in retrieving the source code compared to existing approaches. Our proposed approach offers a promising solution to the problem of code retrieval in software reverse engineering and opens up new avenues for further research in this area.

An agent can complete a task while exhibiting undesirable behavior during execution. Developers need tests for the specific behaviors encountered in deployment, beyond fixed benchmark suites. We present TraceDance, an agent system that constructs targeted benchmarks from deployment traces for user-specified undesirable behaviors. For efficient construction, Anchor-and-Confirm combines programmable retrieval with candidate-level confirmation by a Flash large language model (LLM), while the Anchor Synthesis Loop generates and revises specifications for custom behaviors. The benchmarks use decision-point continuation to evaluate an LLM's next turn at a recorded decision point with a behavior-specific rubric, without a reference answer or environment replay. Experiments in coding and general tool use draw on 252,557 sessions and produce 107 benchmarks with 4,125 instances, fulfilling 95.3% of build-target requests. Both human annotators confirm the requested behavior in 84% of sampled instances, and the automated grader's agreement with human pass/fail judgments is comparable to that between the annotators. Nine frontier LLMs achieve a mean pass rate of only 26.7%, showing that they still struggle to respond appropriately at the evaluated decision points. Analysis across behavior-specific benchmarks further reveals weaknesses in how current LLMs behave as agents. By turning deployment problems into targeted benchmarks, TraceDance could serve as a key component of the recursive self-improvement (RSI) loop.

Tracking Any Point (TAP) in a video is a challenging computer vision problem with many demonstrated applications in robotics, video editing, and 3D reconstruction. Existing methods for TAP rely heavily on complex tracking-specific inductive biases and heuristics, limiting their generality and potential for scaling. To address these challenges, we present TAPNext, a new approach that casts TAP as sequential masked token decoding. Our model is causal, tracks in a purely online fashion, and removes tracking-specific inductive biases. This enables TAPNext to run with minimal latency, and removes the temporal windowing required by many existing state of art trackers. Despite its simplicity, TAPNext achieves a new state-of-the-art tracking performance among both online and offline trackers. Finally, we present evidence that many widely used tracking heuristics emerge naturally in TAPNext through end-to-end training.

Generative AI coding agents are entering the open-source supply chain, yet their diverse and often invisible traces leave their prevalence poorly understood. We introduce a multi-layered detection framework that integrates configuration-file scanning, commit-message analysis, author-identity matching, and bot-signature lookup across World of Code (180M+ Git repositories), classifying agent traces into four behavioral types. No single method captures more than a fraction of activity: multi-method detection identifies 850,157 Claude Code commits in one snapshot, of which bot-account lookup_the signal most adoption studies rely on_recovers only 28,154 (3.3%), a 30x relative-recall gap, so single-signal prevalence estimates are biased low by at least this factor. Every detection pattern is hand-validated (495 labels) with per-cell precision and Wilson confidence intervals. Across snapshots from December 2024 to April 2026, commit-attributed agents generate over 320,000 commits per month; Claude Code leads (886,122 commits across 17,295 projects) and dominates silent, configuration-file-only adoption (21,078 projects). Compared against an independent pull-request census (AIDev), the two channels capture nearly disjoint agent populations_a PR census misses 79% of commit-detected Claude Code adopters and essentially all Codex adopters_and different kinds of work: PR-deployed cloud agents (Codex, Cursor) surface as feature work, while commit-deployed in-editor agents (Claude Code, OpenHands, Aider) surface as maintenance. The observed work profile follows deployment and detection mode rather than the tool itself, so no single channel is representative.

Tracking tumor lesions across serial CT scans is essential for oncological response assessment. Existing automated methods face a fundamental trade-off: end-to-end trackers achieve high automation but offer no opportunity to correct silent tracking failures, while decoupled registration-segmentation pipelines permit user verification yet discard the lesion's prior appearance, limiting accuracy in ambiguous cases. In this work, we propose a Verified Tracking paradigm: a clinician verifies a registration-proposed prompt, which the model leverages alongside the baseline lesion appearance to resolve segmentation ambiguities. We present a unified framework combining early spatial prompt fusion with latent temporal difference weighting for longitudinally-informed segmentation. To address data scarcity, we leverage large-scale synthetic pretraining, proving essential for exploiting longitudinal context, improving performance by up to 4.5 Dice points over training from scratch. Our approach secured first place in the MICCAI autoPET IV challenge. We further curate and release PanTrack, a new longitudinal pancreatic cancer benchmark, to assess out-of-distribution generalization. Experiments show that our model outperforms prior work in both fully automatic and the proposed verified tracking setting offering a clinically safe middle ground between automation and control. Code, model and dataset will be released at https://github.com/MIC-DKFZ/LongiSeg

User interface (UI) development requires translating design mockups into functional code, a process that remains repetitive and labor-intensive. While recent Vision-Language Models (VLMs) automate UI-to-Code generation, they generate only static HTML/CSS/JavaScript layouts lacking interactivity. To address this, we propose WebVIA, the first agentic framework for interactive UI-to-Code generation and validation. The framework comprises three components: 1) an exploration agent to capture multi-state UI screenshots; 2) a UI2Code model that generates executable interactive code; 3) a validation module that verifies the interactivity. Experiments demonstrate that WebVIA-Agent achieves more stable and accurate UI exploration than general-purpose agents (e.g., Gemini-2.5-Pro). In addition, our fine-tuned WebVIA-UI2Code models exhibit substantial improvements in generating executable and interactive HTML/CSS/JavaScript code, outperforming their base counterparts across both interactive and static UI2Code benchmarks. Our code and models are available at https://zheny2751-dotcom.github.io/webvia.github.io/{https://webvia.github.io}.

The emergence of Large Language Models (LLMs) has catalyzed a paradigm shift in programming, giving rise to "vibe coding", where users can build complete projects and even control computers using natural language instructions. This paradigm has driven automated webpage development, but it introduces a new requirement about how to automatically verify whether the web functionalities are reliably implemented. Existing works struggle to adapt, relying on static visual similarity or predefined checklists that constrain their utility in open-ended environments. Furthermore, they overlook a vital aspect of software quality, namely latent logical constraints. To address these gaps, we introduce WebTestBench, a benchmark for evaluating end-to-end automated web testing. WebTestBench encompasses comprehensive dimensions across diverse web application categories. We decompose the testing process into two cascaded sub-tasks, checklist generation and defect detection, and propose WebTester, a baseline framework for this task. Evaluating popular LLMs with WebTester reveals severe challenges, including insufficient test completeness, detection bottlenecks, and long-horizon interaction unreliability. These findings expose a substantial gap between current computer-use agent capabilities and industrial-grade deployment demands. We hope that WebTestBench provides valuable insights and guidance for advancing end-to-end automated web testing. Our dataset and code are available at https://github.com/friedrichor/WebTestBench.

A coding agent can earn a passing grade by fixing its code, or by deleting the test that exposes the bug. Detecting such reward hacking requires recognizing attempted shortcuts, including those that fail. We release 173,561 annotated multi-turn coding trajectories from Qwen3-8B and show that supervising shortcut behavior independently of exploit success substantially improves detection. We introduce HACKTRACE, a behavior-supervised monitor that reads the internal states the agent already computes while generating code. Reusing these states enables monitoring before a turn is complete, without additional language-model tokens or passes. Combining this evidence with static features of the final files achieves a mean per-problem AUC of 0.997 with 8 ms of monitoring overhead, improving both accuracy and latency over monitors that run the model again on an honesty question and answer. The same generation states also provide an inexpensive monitoring signal for reinforcement learning. With strong GRPO penalties, HACKTRACE reduces the cheating share of passing solutions from 82-91% to 1-5%, while retaining honest, correct solutions and maintaining high detection accuracy as the policy evolves. Our results show that both the supervision target and the source of monitoring evidence matter for turning accurate detection into a useful training signal.

AIs are increasingly being deployed with greater autonomy and capabilities, which increases the risk that a misaligned AI may be able to cause catastrophic harm. Untrusted monitoring -- using one untrusted model to oversee another -- is one approach to reducing risk. Justifying the safety of an untrusted monitoring deployment is challenging because developers cannot safely deploy a misaligned model to test their protocol directly. In this paper, we develop upon existing methods for rigorously demonstrating safety based on pre-deployment testing. We relax assumptions that previous AI control research made about the collusion strategies a misaligned AI might use to subvert untrusted monitoring. We develop a taxonomy covering passive self-recognition, causal collusion (hiding pre-shared signals), acausal collusion (hiding signals via Schelling points), and combined strategies. We create a safety case sketch to clearly present our argument, explicitly state our assumptions, and highlight unsolved challenges. We identify conditions under which passive self-recognition could be a more effective collusion strategy than those studied previously. Our work builds towards more robust evaluations of untrusted monitoring.

We present JAttack, a framework that enables template-based testing for compilers. Using JAttack, a developer writes a template program that describes a set of programs to be generated and given as test inputs to a compiler. Such a framework enables developers to incorporate their domain knowledge on testing compilers, giving a basic program structure that allows for exploring complex programs that can trigger sophisticated compiler optimizations. A developer writes a template program in the host language (Java) that contains holes to be filled by JAttack. Each hole, written using a domain-specific language, constructs a node within an extended abstract syntax tree (eAST). An eAST node defines the search space for the hole, i.e., a set of expressions and values. JAttack generates programs by executing templates and filling each hole by randomly choosing expressions and values (available within the search space defined by the hole). Additionally, we introduce several optimizations to reduce JAttack's generation cost. While JAttack could be used to test various compiler features, we demonstrate its capabilities in helping test just-in-time (JIT) Java compilers, whose optimizations occur at runtime after a sufficient number of executions. Using JAttack, we have found six critical bugs that were confirmed by Oracle developers. Four of them were previously unknown, including two unknown CVEs (Common Vulnerabilities and Exposures). JAttack shows the power of combining developers' domain knowledge (via templates) with random testing to detect bugs in JIT compilers.

In the realm of web agent research, achieving both generalization and accuracy remains a challenging problem. Due to high variance in website structure, existing approaches often fail. Moreover, existing fine-tuning and in-context learning techniques fail to generalize across multiple websites. We introduce Wilbur, an approach that uses a differentiable ranking model and a novel instruction synthesis technique to optimally populate a black-box large language model's prompt with task demonstrations from previous runs. To maximize end-to-end success rates, we also propose an intelligent backtracking mechanism that learns and recovers from its mistakes. Finally, we show that our ranking model can be trained on data from a generative auto-curriculum which samples representative goals from an LLM, runs the agent, and automatically evaluates it, with no manual annotation. Wilbur achieves state-of-the-art results on the WebVoyager benchmark, beating text-only models by 8% overall, and up to 36% on certain websites. On the same benchmark, Wilbur is within 5% of a strong multi-modal model despite only receiving textual inputs, and further analysis reveals a substantial number of failures are due to engineering challenges of operating the web.

This paper explores a pragmatic approach to multiple object tracking where the main focus is to associate objects efficiently for online and realtime applications. To this end, detection quality is identified as a key factor influencing tracking performance, where changing the detector can improve tracking by up to 18.9%. Despite only using a rudimentary combination of familiar techniques such as the Kalman Filter and Hungarian algorithm for the tracking components, this approach achieves an accuracy comparable to state-of-the-art online trackers. Furthermore, due to the simplicity of our tracking method, the tracker updates at a rate of 260 Hz which is over 20x faster than other state-of-the-art trackers.

Tracking dense, homogeneous targets like schooling fish remains a major challenge for multiple object tracking due to extreme inter-individual homogeneity, severe physical clustering, and rapid non-rigid deformations. While heavy-backbone separated detection and embedding trackers like SU-T push accuracy boundaries using complex Re-Identification networks, their computational overhead prohibits edge deployment. Furthermore, these modules often fail when appearance features degrade under severe occlusions. To overcome this, we propose Tracking Identities with Dual-branch Elasticity (TIDE). Bypassing expensive appearance cues, TIDE utilizes the Adaptive Geometric Correspondence IoU, an association mechanism leveraging spatial and structural consistency to robustly handle complex morphological variations. Crucially, TIDE introduces system-level deployment elasticity, decoupling the algorithmic pipeline from strict hardware constraints. Evaluations on the MFT-Edge benchmark demonstrate that our Lightweight L-branch achieves a competitive HOTA of 28.43 using merely 20.47G FLOPs. This represents a 38.7-fold computational reduction compared to upper bounds like SU-T, directly facilitating real-time edge deployment. Concurrently, our Scalable S-branch establishes a 29.98 HOTA, successfully bridging the gap between high-precision cloud analysis and efficient edge tracking. The dataset and codes are released at https://vranlee.github.io/TIDE/.

GUI agents accumulate high-resolution screenshots as the trajectory unfolds, increasing inference latency and memory usage. Training-free visual token pruning can reduce this cost, but cache reuse introduces a fundamental constraint. Once tokens are discarded, the corresponding visual evidence cannot be recovered without re-encoding. Pruning therefore becomes an irreversible admission decision that must remain useful for unknown future targets while preserving coverage of operable regions under tight budgets. To address these challenges, we propose \method{}, a training-free framework for \textbf{Trajectory-robust Admission and Coverage-aware Evidence ordering}. Specifically, we combine a query-independent layout-derived interaction prior with instruction relevance and feature novelty to rank visual evidence according to both potential future utility and diversity. Then, we reserve part of the budget for native visual tokens distributed across the screen, repairing missing spatial coverage without breaking the ordering. Together, these mechanisms produce a nested token order, allowing retained visual evidence to shrink monotonically across budgets while remaining reusable throughout the trajectory. Finally, our monotone KV contraction incrementally contracts retired frames into compact session state, avoiding repeated visual encoding or pruning. Extensive experiments across six GUI benchmarks and diverse models verify the effectiveness of our proposed under tight budgets. The source code will be released.

Existing visual tracking methods typically take an image patch as the reference of the target to perform tracking. However, a single image patch cannot provide a complete and precise concept of the target object as images are limited in their ability to abstract and can be ambiguous, which makes it difficult to track targets with drastic variations. In this paper, we propose the CiteTracker to enhance target modeling and inference in visual tracking by connecting images and text. Specifically, we develop a text generation module to convert the target image patch into a descriptive text containing its class and attribute information, providing a comprehensive reference point for the target. In addition, a dynamic description module is designed to adapt to target variations for more effective target representation. We then associate the target description and the search image using an attention-based correlation module to generate the correlated features for target state reference. Extensive experiments on five diverse datasets are conducted to evaluate the proposed algorithm and the favorable performance against the state-of-the-art methods demonstrates the effectiveness of the proposed tracking method.

Software supply chain attacks targeting the npm ecosystem have become increasingly sophisticated, leveraging obfuscation and complex logic to evade traditional detection mechanisms. Recently, large language models (LLMs) have attracted significant attention for malicious code detection due to their strong capabilities in semantic code understanding. However, the practical deployment of LLMs in this domain is severely constrained by limited context windows and high computational costs. Naive approaches, such as token-based code splitting, often fragment semantic context, leading to degraded detection performance. To overcome these challenges, this paper introduces a novel LLM-based framework for malicious npm package detection that leverages code slicing techniques. A specialized taint-based slicing method tailored to the JavaScript ecosystem is proposed to recover malicious data flows. By isolating security-relevant logic from benign boilerplate code, the approach reduces the input code volume by over 99\% while preserving critical malicious behaviors. The framework is evaluated on a curated dataset comprising over 7000 malicious and benign npm packages. Experimental results using the DeepSeek-Coder-6.7B model demonstrate that the proposed approach achieves a detection accuracy of 87.04\%, significantly outperforming a full-package baseline based on naive token splitting (75.41\%). These results indicate that semantically optimized input representations via code slicing not only mitigate the LLM context window bottleneck but also enhance reasoning precision for security analysis, providing an effective defense against evolving open-source software supply chain threats.

This paper introduces MCTrack, a new 3D multi-object tracking method that achieves state-of-the-art (SOTA) performance across KITTI, nuScenes, and Waymo datasets. Addressing the gap in existing tracking paradigms, which often perform well on specific datasets but lack generalizability, MCTrack offers a unified solution. Additionally, we have standardized the format of perceptual results across various datasets, termed BaseVersion, facilitating researchers in the field of multi-object tracking (MOT) to concentrate on the core algorithmic development without the undue burden of data preprocessing. Finally, recognizing the limitations of current evaluation metrics, we propose a novel set that assesses motion information output, such as velocity and acceleration, crucial for downstream tasks. The source codes of the proposed method are available at this link: https://github.com/megvii-research/MCTrack}{https://github.com/megvii-research/MCTrack

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

Behavioral Co-Versioning remains absent from mainstream practice: while developers routinely version source code with Git, they rarely persist and query how run-time behavior evolves across revisions. This paper argues that this mismatch contributes to a blind spot in software evolution analysis and CI, where rich execution information is discarded and typically reduced to pass/fail outcomes -- despite partial test oracles, flakiness, and silent output or performance drift. We propose Behavioral Co-Versioning, a paradigm that couples the Git history with a Behavioral Archive: an append-only, queryable store of selected run-time observations (e.g., method I/O and performance signals) collected during test runs and keyed by commit and test context. This enables semantic diffing, behavior-aware regression localization, and retrospective auditing by querying historical executions, complementing proactive, signal-specific monitoring tools. We first outline a minimal data model and change diagnostics based on code/test/behavior fingerprints, and then demonstrate feasibility with a laptop-scale prototype that replays historical commits of a Python project, archives run-time observations in a local Parquet-backed store, and detects behavioral changes not apparent from textual diffs.

Verifying the success of computer use agent (CUA) trajectories is a critical challenge: without reliable verification, neither evaluation nor training signal can be trusted. In this paper, we present lessons learned from building a best-in-class verifier for web tasks we call the Universal Verifier. We design the Universal Verifier around four key principles: 1) constructing rubrics with meaningful, non-overlapping criteria to reduce noise; 2) separating process and outcome rewards that yield complementary signals, capturing cases where an agent follows the right steps but gets blocked or succeeds through an unexpected path; 3) distinguishing between controllable and uncontrollable failures scored via a cascading-error-free strategy for finer-grained failure understanding; and 4) a divide-and-conquer context management scheme that attends to all screenshots in a trajectory, improving reliability on longer task horizons. We validate these findings on CUAVerifierBench, a new set of CUA trajectories with both process and outcome human labels, showing that our Universal Verifier agrees with humans as often as humans agree with each other. We report a reduction in false positive rates to near zero compared to baselines like WebVoyager (geq 45\%) and WebJudge (geq 22\%). We emphasize that these gains stem from the cumulative effect of the design choices above. We also find that an auto-research agent achieves 70\% of expert quality in 5\% of the time, but fails to discover all strategies required to replicate the Universal Verifier. We open-source our Universal Verifier system along with CUAVerifierBench; available at https://github.com/microsoft/fara.

Predictive code completion greatly accelerates how quickly developers work. In spreadsheets, despite being much more common, such auto-completion features are virtually non-existent. To address this gap, we introduce a benchmark for systems that observe a sequence of user actions in a spreadsheet and predict future actions. Two challenges are (1) the absence of edit histories in public spreadsheet corpora and (2) the complex space of spreadsheet actions (spatial, temporal, composite). To address (1), we manually curate 52 sequences of 12K actions that recreate spreadsheets from public corpora, seeded by parametrized heuristics and LLM refinement. To address (2), we propose an online evaluation that expects a prediction after each user action, accepts or rejects that prediction, updates the future actions upon acceptance, and repeats this until the target spreadsheet is obtained. We use multiple baseline predictors (including zero-shot LLMs, fine-tuned SLMs, and classical models) and analyze different properties that our benchmark teaches us, including but not limited to: properties of saved actions and false positives, efficiency, effect of user profiles, effect of triggers, and effect of context.

While recent foundational video generators produce visually rich output, they still struggle with appearance drift, where objects gradually degrade or change inconsistently across frames, breaking visual coherence. We hypothesize that this is because there is no explicit supervision in terms of spatial tracking at the feature level. We propose Track4Gen, a spatially aware video generator that combines video diffusion loss with point tracking across frames, providing enhanced spatial supervision on the diffusion features. Track4Gen merges the video generation and point tracking tasks into a single network by making minimal changes to existing video generation architectures. Using Stable Video Diffusion as a backbone, Track4Gen demonstrates that it is possible to unify video generation and point tracking, which are typically handled as separate tasks. Our extensive evaluations show that Track4Gen effectively reduces appearance drift, resulting in temporally stable and visually coherent video generation. Project page: hyeonho99.github.io/track4gen

Online multi-object tracking has been recently dominated by tracking-by-detection (TbD) methods, where recent advances rely on increasingly sophisticated heuristics for tracklet representation, feature fusion, and multi-stage matching. The key strength of TbD lies in its modular design, enabling the integration of specialized off-the-shelf models like motion predictors and re-identification. However, the extensive usage of human-crafted rules for temporal associations makes these methods inherently limited in their ability to capture the complex interplay between various tracking cues. In this work, we introduce CAMEL, a novel association module for Context-Aware Multi-Cue ExpLoitation, that learns resilient association strategies directly from data, breaking free from hand-crafted heuristics while maintaining TbD's valuable modularity. At its core, CAMEL employs two transformer-based modules and relies on a novel association-centric training scheme to effectively model the complex interactions between tracked targets and their various association cues. Unlike end-to-end detection-by-tracking approaches, our method remains lightweight and fast to train while being able to leverage external off-the-shelf models. Our proposed online tracking pipeline, CAMELTrack, achieves state-of-the-art performance on multiple tracking benchmarks. Our code is available at https://github.com/TrackingLaboratory/CAMELTrack.

This paper aims for high-performance offline LiDAR-based 3D object detection. We first observe that experienced human annotators annotate objects from a track-centric perspective. They first label the objects with clear shapes in a track, and then leverage the temporal coherence to infer the annotations of obscure objects. Drawing inspiration from this, we propose a high-performance offline detector in a track-centric perspective instead of the conventional object-centric perspective. Our method features a bidirectional tracking module and a track-centric learning module. Such a design allows our detector to infer and refine a complete track once the object is detected at a certain moment. We refer to this characteristic as "onCe detecTed, neveR Lost" and name the proposed system CTRL. Extensive experiments demonstrate the remarkable performance of our method, surpassing the human-level annotating accuracy and the previous state-of-the-art methods in the highly competitive Waymo Open Dataset without model ensemble. The code will be made publicly available at https://github.com/tusen-ai/SST.

We present the first empirical study of AI-generated pull requests that are 'silent,' meaning no comments or discussions accompany them. This absence of any comments or discussions associated with such silent AI pull requests (SPRs) poses a unique challenge in understanding the rationale for their acceptance or rejection. Hence, we quantitatively study 4,762 SPRs of five AI agents made to popular Python repositories drawn from the AIDev public dataset. We examine SPRs impact on code complexity, other quality issues, and security vulnerabilities, especially to determine whether these insights can hint at the rationale for acceptance or rejection of SPRs.

Autonomous web agents promise to automate everyday browsing tasks, but inherit one of the web's oldest attack surfaces. Cross-Site Scripting proved that mixing trusted and untrusted content is dangerous, even on benign pages. Agents resurface this risk by interpreting natural language as instructions, allowing third-party and user-generated content to hijack the agent via prompt injection. The core challenge is that deriving a task-specific security policy requires reasoning over page structure that is entangled with the attacker's content. We present Prismata, a defense enforcing contextual least privilege for web agents, constraining both what the agent sees and what it can do. Prismata's dynamic trust derivation produces permission labels for page content, with structural confinement guarantees, inspired by classical integrity models, that bound any labeling errors so that labels can only decrease in privilege and mislabelings are bounded. Prismata's mechanical confinement enforces these labels by redacting content and restricting agent capabilities. Importantly, these mechanisms require no developer annotations, so Prismata supports the long tail of websites. Across recent published web agent attacks, including adaptive variants, Prismata substantially reduces attack success while preserving benign task utility.

The growing demand for intelligent environments unleashes an extraordinary cycle of privacy-aware applications that makes individuals' life more comfortable and safe. Examples of these applications include pedestrian tracking systems in large areas. Although the ubiquity of camera-based systems, they are not a preferable solution due to the vulnerability of leaking the privacy of pedestrians. In this paper, we introduce a novel privacy-preserving system for pedestrian tracking in smart environments using multiple distributed LiDARs of non-overlapping views. The system is designed to leverage LiDAR devices to track pedestrians in partially covered areas due to practical constraints, e.g., occlusion or cost. Therefore, the system uses the point cloud captured by different LiDARs to extract discriminative features that are used to train a metric learning model for pedestrian matching purposes. To boost the system's robustness, we leverage a probabilistic approach to model and adapt the dynamic mobility patterns of individuals and thus connect their sub-trajectories. We deployed the system in a large-scale testbed with 70 colorless LiDARs and conducted three different experiments. The evaluation result at the entrance hall confirms the system's ability to accurately track the pedestrians with a 0.98 F-measure even with zero-covered areas. This result highlights the promise of the proposed system as the next generation of privacy-preserving tracking means in smart environments.

Large Language Models (LLMs) have revolutionized various domains but remain vulnerable to prompt injection attacks, where malicious inputs manipulate the model into ignoring original instructions and executing designated action. In this paper, we investigate the underlying mechanisms of these attacks by analyzing the attention patterns within LLMs. We introduce the concept of the distraction effect, where specific attention heads, termed important heads, shift focus from the original instruction to the injected instruction. Building on this discovery, we propose Attention Tracker, a training-free detection method that tracks attention patterns on instruction to detect prompt injection attacks without the need for additional LLM inference. Our method generalizes effectively across diverse models, datasets, and attack types, showing an AUROC improvement of up to 10.0% over existing methods, and performs well even on small LLMs. We demonstrate the robustness of our approach through extensive evaluations and provide insights into safeguarding LLM-integrated systems from prompt injection vulnerabilities.

With the emergence of remote code execution (RCE) vulnerabilities in ubiquitous libraries and advanced social engineering techniques, threat actors have started conducting widespread fileless cryptojacking attacks. These attacks have become effective with stealthy techniques based on PowerShell-based exploitation in Windows OS environments. Even if attacks are detected and malicious scripts removed, processes may remain operational on victim endpoints, creating a significant challenge for detection mechanisms. In this paper, we conducted an experimental study with a collected dataset on detecting PowerShell-based fileless cryptojacking scripts. The results showed that Abstract Syntax Tree (AST)-based fine-tuned CodeBERT achieved a high recall rate, proving the importance of the use of AST integration and fine-tuned pre-trained models for programming language.

Production LLM coding agents drift over long sessions: they forget user-specified constraints, slip into mistakes the user already flagged, and confabulate prior agreements. White-box approaches such as persona vectors require model weights and so cannot be applied to closed APIs (Claude, GPT-4) that most users actually interact with. We present Nautilus Compass, a black-box persona drift detector and agent memory layer for production coding agents. The method operates entirely at the prompt-text layer: cosine similarity between user prompts and behavioral anchor texts, aggregated by a weighted top-k mean using BGE-m3 embeddings. Compass is, to our knowledge, the only public agent memory layer (among Mem0, Letta, Cognee, Zep, MemOS, smrti verified May 2026) that does not call an LLM at index time to extract facts or build a graph; raw conversation text is embedded directly. The system ships as a Claude Code plugin, an MCP 2024-11-05 A2A server (Cursor, Cline, Hermes), a CLI, and a REST API on one daemon, with a Merkle-chained audit log for tamper-evident anchor updates. On a held-out test set built from real Claude Code session traces and labeled by an independent LLM judge, Compass reaches ROC AUC 0.83 for drift detection. The embedded retrieval pipeline scores 56.6% on LongMemEval-S v0.8 and 44.4% on EverMemBench-Dynamic (n=500), topping the four published EverMemBench Table 4 baselines. LongMemEval-S 56.6% is ~30 points below recent white-box leaders (90+%); we treat that as the architectural ceiling of the no-extraction design. End-to-end reproduction cost is $3.50 (~14x cheaper than GPT-4o-judged stacks). A paired cross-vendor behavior A/B accompanies these numbers as preliminary system-level evidence. Code, anchors, frozen test data, and audit-log tooling are MIT-licensed at github.com/chunxiaoxx/nautilus-compass.

In this paper, we propose MOTRv2, a simple yet effective pipeline to bootstrap end-to-end multi-object tracking with a pretrained object detector. Existing end-to-end methods, MOTR and TrackFormer are inferior to their tracking-by-detection counterparts mainly due to their poor detection performance. We aim to improve MOTR by elegantly incorporating an extra object detector. We first adopt the anchor formulation of queries and then use an extra object detector to generate proposals as anchors, providing detection prior to MOTR. The simple modification greatly eases the conflict between joint learning detection and association tasks in MOTR. MOTRv2 keeps the query propogation feature and scales well on large-scale benchmarks. MOTRv2 ranks the 1st place (73.4% HOTA on DanceTrack) in the 1st Multiple People Tracking in Group Dance Challenge. Moreover, MOTRv2 reaches state-of-the-art performance on the BDD100K dataset. We hope this simple and effective pipeline can provide some new insights to the end-to-end MOT community. Code is available at https://github.com/megvii-research/MOTRv2.

Interactive LLM agents are becoming part of daily work, but they do not reliably become easier to work with over time: a correction remembered in one session may still be violated in the next. We study this gap between preference access and preference compliance. In tasks derived from anonymized real-user friction cases, Mem0 memory still leaves 57.5% of applicable preference checks violated. We introduce Test-time Rule Acquisition and Compiled Enforcement (TRACE), a drop-in skill-layer pipeline for coding-agent runtimes that mines user corrections, rewrites them as atomic rules, and compiles them into runtime checks that must pass before an agent completes future tasks. Unlike runtime checks written ahead of time by developers, TRACE skills come from the user's own chat corrections. We evaluate TRACE with simulated user-in-the-loop experiments on ClawArena coding-agent tasks and MemoryArena-derived memory-intensive tasks. On ClawArena, TRACE reduces held-out preference violation from 100.0% to 37.6% on in-distribution tasks and from 100.0% to 2.0% on out-of-distribution tasks. On MemoryArena-derived tasks, TRACE reduces in-distribution violation from 100.0% to 60.5% while matching or exceeding the strongest memory baseline on task pass. These results suggest that compiling corrections into runtime enforcement can address a repeated-friction failure mode that memory alone does not reliably solve, reducing the need for users to restate the same correction across future sessions. Experiment code is available at https://github.com/YujunZhou/TRACE_exp, and the deployable skill is available at https://github.com/YujunZhou/tellonce.

Large language models (LLMs) and their applications, such as agents, are highly vulnerable to prompt injection attacks. State-of-the-art prompt injection detection methods have the following limitations: (1) their effectiveness degrades significantly as context length increases, and (2) they lack explicit rules that define what constitutes prompt injection, causing detection decisions to be implicit, opaque, and difficult to reason about. In this work, we propose AgentWatcher to address the above two limitations. To address the first limitation, AgentWatcher attributes the LLM's output (e.g., the action of an agent) to a small set of causally influential context segments. By focusing detection on a relatively short text, AgentWatcher can be scalable to long contexts. To address the second limitation, we define a set of rules specifying what does and does not constitute a prompt injection, and use a monitor LLM to reason over these rules based on the attributed text, making the detection decisions more explainable. We conduct a comprehensive evaluation on tool-use agent benchmarks and long-context understanding datasets. The experimental results demonstrate that AgentWatcher can effectively detect prompt injection and maintain utility without attacks. The code is available at https://github.com/wang-yanting/AgentWatcher.

We introduce LiteWebAgent, an open-source suite for VLM-based web agent applications. Our framework addresses a critical gap in the web agent ecosystem with a production-ready solution that combines minimal serverless backend configuration, intuitive user and browser interfaces, and extensible research capabilities in agent planning, memory, and tree search. For the core LiteWebAgent agent framework, we implemented a simple yet effective baseline using recursive function calling, providing with decoupled action generation and action grounding. In addition, we integrate advanced research components such as agent planning, agent workflow memory, and tree search in a modular and extensible manner. We then integrate the LiteWebAgent agent framework with frontend and backend as deployed systems in two formats: (1) a production Vercel-based web application, which provides users with an agent-controlled remote browser, (2) a Chrome extension leveraging LiteWebAgent's API to control an existing Chrome browser via CDP (Chrome DevTools Protocol). The LiteWebAgent framework is available at https://github.com/PathOnAI/LiteWebAgent, with deployed frontend at https://lite-web-agent.vercel.app/.

Program verifiers play a central role in training coding agents, including selecting trajectories for supervised fine-tuning (SFT) and providing rewards for reinforcement learning (RL). Standard execution-based verification requires running unit tests inside per-repository environments such as Docker images, incurring substantial environment setup costs. We propose Dockerless, an environment-free agentic patch verifier that evaluates generated code patches without executing them. Rather than simply matching candidate patches to references, Dockerless judges patch correctness using evidence gathered through agentic repository exploration. On a verifier evaluation benchmark, Dockerless outperforms the strongest open-source verifier by 14.3 AUC points. Using Dockerless as both the SFT trajectory filter and the RL reward enables a fully environment-free post-training pipeline. The resulting model reaches 62.0%, 50.0%, and 35.2% resolve rate on SWE-bench Verified, Multilingual, and Pro, respectively. It surpasses the Qwen3.5-9B baseline by 2.4, 8.7, and 2.9 points, matching environment-based post-training.

Autonomous LLM agents can pursue hidden malicious objectives through sequences of individually benign actions, making sabotage difficult to detect using standard trajectory-level monitoring. Existing approaches either evaluate complete trajectories in a single pass or partition them into independently scored windows, limiting their ability to connect evidence across temporally distant actions. We propose TRACE, a monitoring framework for long-horizon LLM agent trajectories. TRACE operates through a TIJ (Triage-Inspect-Judge) loop that identifies high-signal regions, performs targeted inspection while maintaining accumulated evidence across reasoning steps, and synthesizes a trajectory-level verdict. We evaluate TRACE on ten task domains from SHADE-Arena against state-of-the-art baselines. TRACE achieves an aggregate F1 of 0.713 and recall of 0.844, with the largest gains on tasks requiring long-range evidence linking.

Models for long-term point tracking are typically trained on large synthetic datasets. The performance of these models degrades in real-world videos due to different characteristics and the absence of dense ground-truth annotations. Self-training on unlabeled videos has been explored as a practical solution, but the quality of pseudo-labels strongly depends on the reliability of teacher models, which vary across frames and scenes. In this paper, we address the problem of real-world fine-tuning and introduce verifier, a meta-model that learns to assess the reliability of tracker predictions and guide pseudo-label generation. Given candidate trajectories from multiple pretrained trackers, the verifier evaluates them per frame and selects the most trustworthy predictions, resulting in high-quality pseudo-label trajectories. When applied for fine-tuning, verifier-guided pseudo-labeling substantially improves the quality of supervision and enables data-efficient adaptation to unlabeled videos. Extensive experiments on four real-world benchmarks demonstrate that our approach achieves state-of-the-art results while requiring less data than prior self-training methods. Project page: https://kuis-ai.github.io/track_on_r

Autonomous web agents such as OpenClaw are rapidly moving into high-impact real-world workflows, but their security robustness under live network threats remains insufficiently evaluated. Existing benchmarks mainly focus on static sandbox settings and content-level prompt attacks, which leaves a practical gap for network-layer security testing. In this paper, we present ClawTrap, a MITM-based red-teaming framework for real-world OpenClaw security evaluation. ClawTrap supports diverse and customizable attack forms, including Static HTML Replacement, Iframe Popup Injection, and Dynamic Content Modification, and provides a reproducible pipeline for rule-driven interception, transformation, and auditing. This design lays the foundation for future research to construct richer, customizable MITM attacks and to perform systematic security testing across agent frameworks and model backbones. Our empirical study shows clear model stratification: weaker models are more likely to trust tampered observations and produce unsafe outputs, while stronger models demonstrate better anomaly attribution and safer fallback strategies. These findings indicate that reliable OpenClaw security evaluation should explicitly incorporate dynamic real-world MITM conditions rather than relying only on static sandbox protocols.

Open-vocabulary Multiple Object Tracking (MOT) aims to generalize trackers to novel categories not in the training set. Currently, the best-performing methods are mainly based on pure appearance matching. Due to the complexity of motion patterns in the large-vocabulary scenarios and unstable classification of the novel objects, the motion and semantics cues are either ignored or applied based on heuristics in the final matching steps by existing methods. In this paper, we present a unified framework SLAck that jointly considers semantics, location, and appearance priors in the early steps of association and learns how to integrate all valuable information through a lightweight spatial and temporal object graph. Our method eliminates complex post-processing heuristics for fusing different cues and boosts the association performance significantly for large-scale open-vocabulary tracking. Without bells and whistles, we outperform previous state-of-the-art methods for novel classes tracking on the open-vocabulary MOT and TAO TETA benchmarks. Our code is available at https://github.com/siyuanliii/SLAck{github.com/siyuanliii/SLAck}.

Runtime guardrails are essential for reliable large language model (LLM) deployment, yet existing approaches typically rely on independent, external models that introduce additional inference cost, delayed safety signals, and a capacity mismatch with increasingly capable base models. To address these issues, we introduce SingProbe, a lightweight intrinsic runtime guard that directly reuses hidden states produced during LLM inference and operates alongside autoregressive decoding. Within a unified framework, SingProbe continuously predicts query intent, response safety, and hallucination risk at the token level with negligible additional guardrail inference overhead, offering a "free-lunch" solution. We further introduce SingStreamBench, a benchmark designed to assess whether streaming guardrails remain inactive on benign prefixes while promptly detecting emerging unsafe content. Extensive experiments show that SingProbe achieves competitive or superior performance compared with substantially larger standalone guardrails and specialized hallucination detectors, with only approx2M parameters and <0.5% extra overhead. Beyond passive detection, we also show that SingProbe scores can anticipate future generation risk and guide constrained safe decoding. We further extend this paradigm to medical generation through SingProbe-Med, which selectively activates risk-directed decoding interventions only when clinically relevant risks emerge. Together, these results demonstrate that internal model representations provide an effective and efficient interface for generation-time monitoring and control.