Daily Papers

Large Language Models (LLMs) owe much of their success to next-token prediction (NTP), but their autoregressive (AR) structure requires slow, sequential token generation. To overcome this bottleneck, we introduce diffusion-augmented LLMs, a new class of models that defines an AR model distribution while using diffusion to draw multiple tokens in parallel from that distribution. We decouple the parameters of these models into two sets: AR weights, trained using the standard NTP objective, and lightweight diffusion weights, trained to generate multiple tokens simultaneously. The diffusion weights are learned through a simple Diffusion Distillation phase that adds negligible overhead to existing LLM training pipelines. We also introduce Ψ-Spec, a family of samplers that enables lossless acceleration and inference-time scaling at a fixed context length. Unlike speculative decoding, our method requires no separate draft model. Unlike diffusion LLMs (d-LLMs), it accelerates generation without sacrificing the quality of the underlying AR model. The resulting models, called Uno, can be trained from scratch or built by augmenting existing open-weight AR LLMs. Uno achieves higher throughput than leading speculative-decoding methods at every evaluated batch size and delivers up to 3times speedups over the base AR model, including at the largest batch size supported by the device. Notably, our 8B Uno model outperforms the leading open d-LLM, the 26B DiffusionGemma, and the proprietary Mercury 2 across all evaluated benchmarks in agentic tool use, coding, and long-context reasoning. We release code and checkpoints at: https://s-sahoo.github.io/uno/

Striking an optimal balance between minimal drafting latency and high speculation accuracy to enhance the inference speed of Large Language Models remains a significant challenge in speculative decoding. In this paper, we introduce Falcon, an innovative semi-autoregressive speculative decoding framework fashioned to augment both the drafter's parallelism and output quality. Falcon incorporates the Coupled Sequential Glancing Distillation technique, which fortifies inter-token dependencies within the same block, leading to increased speculation accuracy. We offer a comprehensive theoretical analysis to illuminate the underlying mechanisms. Additionally, we introduce a Custom-Designed Decoding Tree, which permits the drafter to generate multiple tokens in a single forward pass and accommodates multiple forward passes as needed, thereby boosting the number of drafted tokens and significantly improving the overall acceptance rate. Comprehensive evaluations on benchmark datasets such as MT-Bench, HumanEval, and GSM8K demonstrate Falcon's superior acceleration capabilities. The framework achieves a lossless speedup ratio ranging from 2.91x to 3.51x when tested on the Vicuna and LLaMA2-Chat model series. These results outstrip existing speculative decoding methods for LLMs, including Eagle, Medusa, Lookahead, SPS, and PLD, while maintaining a compact drafter architecture equivalent to merely two Transformer layers.

Diffusion Large Language Models (dLLMs) deliver strong long-context processing capability in a non-autoregressive decoding paradigm. However, the considerable computational cost of bidirectional full attention limits the inference efficiency. Although sparse attention is promising, existing methods remain ineffective. This stems from the need to estimate attention importance for tokens yet to be decoded, while the unmasked token positions are unknown during diffusion. In this paper, we present Focus-dLLM, a novel training-free attention sparsification framework tailored for accurate and efficient long-context dLLM inference. Based on the finding that token confidence strongly correlates across adjacent steps, we first design a past confidence-guided indicator to predict unmasked regions. Built upon this, we propose a sink-aware pruning strategy to accurately estimate and remove redundant attention computation, while preserving highly influential attention sinks. To further reduce overhead, this strategy reuses identified sink locations across layers, leveraging the observed cross-layer consistency. Experimental results show that our method offers more than 29times lossless speedup under 32K context length. The code is publicly available at: https://github.com/Longxmas/Focus-dLLM

Diffusion Transformers (DiTs) have demonstrated exceptional performance in high-fidelity image and video generation. To reduce their substantial computational costs, feature caching techniques have been proposed to accelerate inference by reusing hidden representations from previous timesteps. However, current methods often struggle to maintain generation quality at high acceleration ratios, where prediction errors increase sharply due to the inherent instability of long-step forecasting. In this work, we adopt an ordinary differential equation (ODE) perspective on the hidden-feature sequence, modeling layer representations along the trajectory as a feature-ODE. We attribute the degradation of existing caching strategies to their inability to robustly integrate historical features under large skipping intervals. To address this, we propose FoCa (Forecast-then-Calibrate), which treats feature caching as a feature-ODE solving problem. Extensive experiments on image synthesis, video generation, and super-resolution tasks demonstrate the effectiveness of FoCa, especially under aggressive acceleration. Without additional training, FoCa achieves near-lossless speedups of 5.50 times on FLUX, 6.45 times on HunyuanVideo, 3.17 times on Inf-DiT, and maintains high quality with a 4.53 times speedup on DiT.

Speculative decoding accelerates large language model inference by drafting multiple candidate tokens and verifying them in a single forward pass. Candidates are organized as a tree: deeper trees accept more tokens per step, but adding depth requires sacrificing breadth (fallback options) under a fixed verification budget. Existing training-free methods draft from a single token source and shape their trees without distinguishing candidate quality across origins. We observe that two common training-free token sources - n-gram matches copied from the input context, and statistical predictions from prior forward passes - differ dramatically in acceptance rate (~6x median gap, range 2-18x across five models and five benchmarks). We prove that when such a quality gap exists, the optimal tree is anisotropic (asymmetric): reliable tokens should form a deep chain while unreliable tokens spread as wide branches, breaking through the depth limit of balanced trees. We realize this structure in GOOSE, a training-free framework that builds an adaptive spine tree - a deep chain of high-acceptance context-matched tokens with wide branches of low-acceptance alternatives at each node. We prove that the number of tokens accepted per step is at least as large as that of either source used alone. On five LLMs (7B-33B) and five benchmarks, GOOSE achieves 1.9-4.3x lossless speedup, outperforming balanced-tree baselines by 12-33% under the same budget.

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of 1.81times over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

Speculative decoding losslessly accelerates autoregressive language models by verifying multiple draft tokens in parallel. Diffusion-based drafters further reduce proposal latency by predicting an entire token block in parallel, but their position-wise distributions are marginal rather than conditioned on tokens selected along each draft path. Existing recurrent correction incorporates causal information along a single draft chain, whereas diffusion-based tree construction broadens candidate coverage without carrying this correction along individual branches. We introduce DARTree, a training-free speculative decoding method that extends a pretrained AR correction head from chains to trees. DARTree first constructs a fixed-width candidate tree by expanding and scoring all nodes at each depth in a single batch, and then only applies best-first pruning to select the verification tree, decoupling AR-head inference from sequential heap operations. Across seven math, code, and chat benchmarks, DARTree achieves the highest average acceptance length and speedup in all four model--temperature configurations, accepting up to 12.97 tokens per verification round, 98.6\% more than DFlash and 27.9\% more than Domino in the same setting, and reaching up to 9.73times lossless speedup over locally measured autoregressive decoding.

Lossless compression techniques are crucial in an era of rapidly growing data. Traditional universal compressors like gzip offer low computational overhead, high speed, and broad applicability across data distributions. However, they often lead to worse compression rates than modern neural compressors, which leverage large-scale training data to model data distributions more effectively. Despite their advantages, neural compressors struggle to generalize to unseen data. To address this limitation, we propose a novel framework that performs Test-Time Steering via a Weighted Product of Experts (wPoE). At inference, our method adaptively combines a universal compression model with a pretrained neural language model, ensuring the compression rate is at least as good as that of the best individual model. Extensive experiments demonstrate that our approach improves the performance of text compression without requiring fine-tuning. Furthermore, it seamlessly integrates with any autoregressive language model, providing a practical solution for enhancing text compression across diverse data distributions.

Model quantization has become essential for efficient large language model deployment, yet existing approaches present clear trade-offs: methods such as GPTQ and AWQ achieve practical compression but are lossy, while lossless techniques preserve fidelity but lack inference acceleration. This paper explores the middle ground of statistically-lossless compression, examining three complementary aspects of what losslessness means for quantized LLMs. First, task-lossless compression preserves zero-shot benchmark accuracy within natural sampling variance and is achievable at aggressive bitwidths. Second, we formalize the stricter notion of distribution-lossless compression, requiring the quantized model's next-token distribution to be practically indistinguishable from the original, and propose the Expected Acceptance Rate (EAR), the maximum token-agreement probability under optimal coupling, as a directly interpretable fidelity metric. For example, EAR >= 0.99 means 99% agreement. Third, we prove a gamma-squared variance law showing that symmetric quantization inflates noise variance by gamma^2 relative to asymmetric quantization, making asymmetric quantization a prerequisite for distribution-lossless fidelity but not for task-level preservation. Through SLQ, a layer-wise non-uniform method with asymmetric quantization and wide bitwidth search, we obtain task-lossless compression at well below 4 bits per parameter, as low as 3.3 bits depending on the model, distribution-lossless compression at 5-6 bits per parameter on average, and inference speedups of 1.7-3.7x compared to FP16 using optimized kernels. Source code is available at [https://github.com/IST-DASLab/SLQ](https://github.com/IST-DASLab/SLQ).

Lossless model compression holds tremendous promise for alleviating the memory and bandwidth bottlenecks in bit-exact Large Language Model (LLM) serving. However, existing approaches often result in substantial inference slowdowns due to fundamental design mismatches with GPU architectures: at the kernel level, variable-length bitstreams produced by traditional entropy codecs break SIMT parallelism; at the system level, decoupled pipelines lead to redundant memory traffic. We present ZipServ, a lossless compression framework co-designed for efficient LLM inference. ZipServ introduces Tensor-Core-Aware Triple Bitmap Encoding (TCA-TBE), a novel fixed-length format that enables constant-time, parallel decoding, together with a fused decompression-GEMM (ZipGEMM) kernel that decompresses weights on-the-fly directly into Tensor Core registers. This "load-compressed, compute-decompressed" design eliminates intermediate buffers and maximizes compute intensity. Experiments show that ZipServ reduces the model size by up to 30%, achieves up to 2.21x kernel-level speedup over NVIDIA's cuBLAS, and expedites end-to-end inference by an average of 1.22x over vLLM. ZipServ is the first lossless compression system that provides both storage savings and substantial acceleration for LLM inference on GPUs.

Existing work on prompt compression for Large Language Models (LLM) focuses on lossy methods that try to maximize the retention of semantic information that is relevant to downstream tasks while significantly reducing the sequence length. In this paper, we introduce a task-agnostic lossless compression technique similar to LZ77 that makes it possible to reduce the input token sequence length on average by 27\% and 18\% for the two evaluation tasks explored here. Given that we use transformer-based LLMs, this equates to 47\% and 33\% less encoding computation, respectively, due to the quadratic nature of attention. The token sequence transformation is trivial to reverse and highlights that no semantic information is lost in the process. We evaluate our proposed approach on two tasks that require strict preservation of semantics/syntax and demonstrate that existing lossy compression methods perform poorly in this setting. We find that our lossless compression technique produces only a small gap in performance compared to using the uncompressed input and posit that larger models and an expanded computing budget would likely erase the gap entirely.

Auto-regressive decoding makes the inference of Large Language Models (LLMs) time-consuming. We propose a simple framework, EAGLE (Extrapolation Algorithm for Greater Language-model Efficiency), for lossless acceleration. Unlike traditional speculative sampling methods, EAGLE operates the drafting process auto-regressively at the more regular (second-top-layer) feature level and addresses the sampling uncertainty issues in the next-feature prediction problems by integrating tokens from one time step ahead. The acceleration provided by EAGLE is lossless: it involves no fine-tuning of the target LLM, and the generated text maintains the same distribution as that of vanilla auto-regressive decoding. As of the submission of this paper, EAGLE is the fastest known framework within the speculative sampling family. On MT-bench, EAGLE is 3x faster than vanilla decoding, 2x faster than Lookahead, and 1.6x faster than Medusa. Using gpt-fast, EAGLE attains on average 160 tokens/s with LLaMA2-Chat 13B on a single RTX 3090 GPU, compared to 24 tokens/s of Huggingface's implementations.

Test-time search lets small video diffusion models rival larger ones, but costs 2-10x more. All candidates are fully denoised, although most are discarded. Training-free caching makes each rollout 2-3x faster at near-lossless quality. Composition is safe only if lossy caching preserves verifier rankings. We present the first study of whether caching corrupts candidate ranking in video test-time search. On Wan2.1-T2V-1.3B with an adaptive caching wrapper (~2x per-candidate speedup), ImageReward scores seed-matched cached and full rollouts. Median per-prompt Spearman rank correlation is 0.905, with 72% top-1 agreement on the VBench suite. VBench-2.0 replicates this result on a harder suite. Recomputing the cached winner at full compute retains 90-94% of the full-search gain. Errors cluster among near-tied candidates, making corruption self-limiting. This finding leads to CachedSearch. It explores every candidate with aggressive caching, then re-generates only the winner at full compute. At N=8, it captures 94.7% of best-of-N's gain at 63% of the cost. Capture rises with width. At matched budget, it searches twice as wide for 38% more gain. The result holds from 1.3B-14B across six models and four families: Wan, LTX, CogVideoX, and Hunyuan. Wan2.1-14B matches the 1.3B model's fidelity. Mid-trajectory pruning multiplies the exploration saving to 3.11x at 88.6% capture. Ports to other model families require recalibrating a single parameter, showing that fidelity tracks architecture rather than parameter count. CachedSearch is training-free, verifier-agnostic, and orthogonal to the search algorithm, making it a plug-in multiplier for test-time scaling.

Lossless data compression remains central to computer science, with direct impact on storage, communication bandwidth, computational cost, and energy consumption. It is also closely related to Algorithmic Information Theory, where compressibility provides an operational measure of structure and non-randomness. This paper presents the 2026 Algorithmic Information Theory Data Compression Challenge, a benchmark for evaluating general-purpose lossless compressors under realistic constraints. Submissions were encouraged to use arithmetic or range coding, limited to at most 8 GB of memory, and required to include a decompressor no larger than 1 MB. The benchmark comprised sixteen heterogeneous files, split into public training and hidden testing datasets. In total, 117 valid submitted compressors were evaluated alongside established reference compressors using compression ratio, compression and decompression time, Weissman score, and Pareto-frontier analysis. The results show that performance depends strongly on the optimization criterion: fast compressors achieved the best speed-oriented scores, whereas modelling-intensive compressors produced smaller outputs at higher computational cost. A Normalized Compression Distance analysis further revealed clusters of related submissions and distinguished incremental variants from more independent implementations. Selected submissions were described for their methodological novelty or competitive performance and further tested on four large external datasets, where several achieved competitive or superior results relative to established compressors. Overall, the challenge confirms the importance of probabilistic modelling, hidden testing, and external datasets for assessing compression performance and generalization. Benchmark resources, leaderboard data, binaries, and selected source code are publicly available at https://aitdcc.github.io.

Data pruning aims to obtain lossless performances with less overall cost. A common approach is to filter out samples that make less contribution to the training. This could lead to gradient expectation bias compared to the original data. To solve this problem, we propose InfoBatch, a novel framework aiming to achieve lossless training acceleration by unbiased dynamic data pruning. Specifically, InfoBatch randomly prunes a portion of less informative samples based on the loss distribution and rescales the gradients of the remaining samples to approximate the original gradient. As a plug-and-play and architecture-agnostic framework, InfoBatch consistently obtains lossless training results on classification, semantic segmentation, vision pertaining, and instruction fine-tuning tasks. On CIFAR10/100, ImageNet-1K, and ADE20K, InfoBatch losslessly saves 40\% overall cost. For pertaining MAE and diffusion model, InfoBatch can respectively save 24.8\% and 27\% cost. For LLaMA instruction fine-tuning, InfoBatch is also able to save 20\% cost and is compatible with coreset selection methods. The code is publicly available at https://github.com/henryqin1997/InfoBatch{github.com/NUS-HPC-AI-Lab/InfoBatch}.

With the growth of model sizes and the scale of their deployment, their sheer size burdens the infrastructure requiring more network and more storage to accommodate these. While there is a vast model compression literature deleting parts of the model weights for faster inference, we investigate a more traditional type of compression - one that represents the model in a compact form and is coupled with a decompression algorithm that returns it to its original form and size - namely lossless compression. We present ZipNN a lossless compression tailored to neural networks. Somewhat surprisingly, we show that specific lossless compression can gain significant network and storage reduction on popular models, often saving 33% and at times reducing over 50% of the model size. We investigate the source of model compressibility and introduce specialized compression variants tailored for models that further increase the effectiveness of compression. On popular models (e.g. Llama 3) ZipNN shows space savings that are over 17% better than vanilla compression while also improving compression and decompression speeds by 62%. We estimate that these methods could save over an ExaByte per month of network traffic downloaded from a large model hub like Hugging Face.

The rapid scaling of Large Language Models presents significant challenges for their deployment and inference, particularly on resource-constrained specialized AI hardware accelerators such as Huawei's Ascend NPUs, where weight data transfer has become a critical performance bottleneck. While lossless compression can preserve model accuracy and reduce data volume, existing lossless compression algorithms exhibit extremely low throughput when ported to the Ascend NPU architecture. In this paper, we propose ENEC, a novel lossless compression method specifically customized for AI model weights and optimized for Ascend Neural Processing Units. ENEC adopts a block-based fixed-length encoding scheme and incorporates a series of NPU-specific optimizations: bit-width quantization with hierarchical halving bit-packing, vectorized branch-free integer transformation, and dependency-decoupled intra-segment scan for efficient prefix-sum computation. Experimental results demonstrate that ENEC outperforms existing state-of-the-art NPU compressors in both compression ratio and throughput. Compared to leading GPU solutions, ENEC achieves a 3.43X higher throughput than DietGPU and a 1.12X better compression ratio than nvCOMP. By reducing weight transmission overhead, ENEC significantly improves end-to-end inference performance, achieving up to a 6.3X speedup. On Ascend NPUs, ENEC is the first open-source lossless compression algorithm for model weights that achieves performance comparable to state-of-the-art GPU compressors, offering an effective solution for deploying large-scale AI models.

Despite extensive progress on image generation, common deep generative model architectures are not easily applied to lossless compression. For example, VAEs suffer from a compression cost overhead due to their latent variables. This overhead can only be partially eliminated with elaborate schemes such as bits-back coding, often resulting in poor single-sample compression rates. To overcome such problems, we establish a new class of tractable lossless compression models that permit efficient encoding and decoding: Probabilistic Circuits (PCs). These are a class of neural networks involving |p| computational units that support efficient marginalization over arbitrary subsets of the D feature dimensions, enabling efficient arithmetic coding. We derive efficient encoding and decoding schemes that both have time complexity O (log(D) cdot |p|), where a naive scheme would have linear costs in D and |p|, making the approach highly scalable. Empirically, our PC-based (de)compression algorithm runs 5-40 times faster than neural compression algorithms that achieve similar bitrates. By scaling up the traditional PC structure learning pipeline, we achieve state-of-the-art results on image datasets such as MNIST. Furthermore, PCs can be naturally integrated with existing neural compression algorithms to improve the performance of these base models on natural image datasets. Our results highlight the potential impact that non-standard learning architectures may have on neural data compression.

Low precision (LP) datatypes such as MXFP4 can accelerate matrix multiplications (GEMMs) and reduce training costs. However, directly using MXFP4 instead of BF16 during training significantly degrades model quality. In this work, we present the first near-lossless training recipe that uses MXFP4 GEMMs, which are 2times faster than FP8 on supported hardware. Our key insight is to compute unbiased gradient estimates with stochastic rounding (SR), resulting in more accurate model updates. However, directly applying SR to MXFP4 can result in high variance from block-level outliers, harming convergence. To overcome this, we use the random Hadamard tranform to theoretically bound the variance of SR. We train GPT models up to 6.7B parameters and find that our method induces minimal degradation over mixed-precision BF16 training. Our recipe computes >1/2 the training FLOPs in MXFP4, enabling an estimated speedup of >1.3times over FP8 and >1.7times over BF16 during backpropagation.

Deep neural networks have delivered remarkable performance and have been widely used in various visual tasks. However, their huge size causes significant inconvenience for transmission and storage. Many previous studies have explored model size compression. However, these studies often approach various lossy and lossless compression methods in isolation, leading to challenges in achieving high compression ratios efficiently. This work proposes a post-training model size compression method that combines lossy and lossless compression in a unified way. We first propose a unified parametric weight transformation, which ensures different lossy compression methods can be performed jointly in a post-training manner. Then, a dedicated differentiable counter is introduced to guide the optimization of lossy compression to arrive at a more suitable point for later lossless compression. Additionally, our method can easily control a desired global compression ratio and allocate adaptive ratios for different layers. Finally, our method can achieve a stable 10times compression ratio without sacrificing accuracy and a 20times compression ratio with minor accuracy loss in a short time. Our code is available at https://github.com/ModelTC/L2_Compression .

We quantify the upper bound on the size of the implicit neural representation (INR) model from a digital perspective. The upper bound of the model size increases exponentially as the required bit-precision increases. To this end, we present a bit-plane decomposition method that makes INR predict bit-planes, producing the same effect as reducing the upper bound of the model size. We validate our hypothesis that reducing the upper bound leads to faster convergence with constant model size. Our method achieves lossless representation in 2D image and audio fitting, even for high bit-depth signals, such as 16-bit, which was previously unachievable. We pioneered the presence of bit bias, which INR prioritizes as the most significant bit (MSB). We expand the application of the INR task to bit depth expansion, lossless image compression, and extreme network quantization. Our source code is available at https://github.com/WooKyoungHan/LosslessINR

With large language models (LLMs) widely deployed in long content generation recently, there has emerged an increasing demand for efficient long-sequence inference support. However, key-value (KV) cache, which is stored to avoid re-computation, has emerged as a critical bottleneck by growing linearly in size with the sequence length. Due to the auto-regressive nature of LLMs, the entire KV cache will be loaded for every generated token, resulting in low utilization of computational cores and high latency. While various compression methods for KV cache have been proposed to alleviate this issue, they suffer from degradation in generation quality. We introduce TriForce, a hierarchical speculative decoding system that is scalable to long sequence generation. This approach leverages the original model weights and dynamic sparse KV cache via retrieval as a draft model, which serves as an intermediate layer in the hierarchy and is further speculated by a smaller model to reduce its drafting latency. TriForce not only facilitates impressive speedups for Llama2-7B-128K, achieving up to 2.31times on an A100 GPU but also showcases scalability in handling even longer contexts. For the offloading setting on two RTX 4090 GPUs, TriForce achieves 0.108s/tokenx2014only half as slow as the auto-regressive baseline on an A100, which attains 7.78times on our optimized offloading system. Additionally, TriForce performs 4.86times than DeepSpeed-Zero-Inference on a single RTX 4090 GPU. TriForce's robustness is highlighted by its consistently outstanding performance across various temperatures. The code is available at https://github.com/Infini-AI-Lab/TriForce.

We study lossless acceleration for seq2seq generation with a novel decoding algorithm -- Aggressive Decoding. Unlike the previous efforts (e.g., non-autoregressive decoding) speeding up seq2seq generation at the cost of quality loss, our approach aims to yield the identical (or better) generation compared with autoregressive decoding but in a significant speedup, achieved by innovative cooperation of aggressive decoding and verification that are both efficient due to parallel computing. We propose two Aggressive Decoding paradigms for 2 kinds of seq2seq tasks: 1) For the seq2seq tasks whose inputs and outputs are highly similar (e.g., Grammatical Error Correction), we propose Input-guided Aggressive Decoding (IAD) that aggressively copies from the input sentence as drafted decoded tokens to verify in parallel; 2) For other general seq2seq tasks (e.g., Machine Translation), we propose Generalized Aggressive Decoding (GAD) that first employs an additional non-autoregressive decoding model for aggressive decoding and then verifies in parallel in the autoregressive manner. We test Aggressive Decoding on the most popular 6-layer Transformer model on GPU in multiple seq2seq tasks: 1) For IAD, we show that it can introduce a 7x-9x speedup for the Transformer in Grammatical Error Correction and Text Simplification tasks with the identical results as greedy decoding; 2) For GAD, we observe a 3x-5x speedup with the identical or even better quality in two important seq2seq tasks: Machine Translation and Abstractive Summarization. Moreover, Aggressive Decoding can benefit even more from stronger computing devices that are better at parallel computing. Given the lossless quality as well as significant and promising speedup, we believe Aggressive Decoding may potentially evolve into a de facto standard for efficient and lossless seq2seq generation in the near future.

We present StateSMix, a fully self-contained lossless compressor that couples an online-trained Mamba-style State Space Model (SSM) with sparse n-gram context mixing and arithmetic coding. The model is initialised from scratch and trained token-by-token on the file being compressed, requiring no pre-trained weights, no GPU, and no external dependencies. The SSM (DM=32, NL=2, approximately 120K active parameters per file) provides a continuously-updated probability estimate over BPE tokens, while nine sparse n-gram hash tables (bigram through 32-gram, 16M slots each) add exact local and long-range pattern memorisation via a softmax-invariant logit-bias mechanism that updates only non-zero-count tokens. An entropy-adaptive scaling mechanism modulates the n-gram contribution based on the SSM's predictive confidence, preventing over-correction when the neural model is already well-calibrated. On the standard enwik8 benchmark, StateSMix achieves 2.123 bpb on 1 MB, 2.149 bpb on 3 MB, and 2.162 bpb on 10 MB, beating xz -9e (LZMA2) by 8.7%, 5.4%, and 0.7% respectively. Ablation experiments establish the SSM as the dominant compression engine: it alone accounts for a 46.6% size reduction over a frequency-count baseline and beats xz without any n-gram component, while n-gram tables provide a complementary 4.1% gain through exact context memorisation. OpenMP parallelisation of the training loop yields 1.9x speedup on 4 cores. The system is implemented in pure C with AVX2 SIMD and processes approximately 2,000 tokens per second on commodity x86-64 hardware.

Long context inference scenarios have become increasingly important for large language models, yet they introduce significant computational latency. While prior research has optimized long-sequence inference through operators, model architectures, and system frameworks, tokenization remains an overlooked bottleneck. Existing parallel tokenization methods accelerate processing through text segmentation and multi-process tokenization, but they suffer from inconsistent results due to boundary artifacts that occur after merging. To address this, we propose LoPT, a novel Lossless Parallel Tokenization framework that ensures output identical to standard sequential tokenization. Our approach employs character-position-based matching and dynamic chunk length adjustment to align and merge tokenized segments accurately. Extensive experiments across diverse long-text datasets demonstrate that LoPT achieves significant speedup while guaranteeing lossless tokenization. We also provide theoretical proof of consistency and comprehensive analytical studies to validate the robustness of our method.

The immense model sizes of large language models (LLMs) challenge deployment on memory-limited consumer GPUs. Although model compression and parameter offloading are common strategies to address memory limitations, compression can degrade quality, and offloading maintains quality but suffers from slow inference. Speculative decoding presents a promising avenue to accelerate parameter offloading, utilizing a fast draft model to propose multiple draft tokens, which are then verified by the target LLM in parallel with a single forward pass. This method reduces the time-consuming data transfers in forward passes that involve offloaded weight transfers. Existing methods often rely on pretrained weights of the same family, but require additional training to align with custom-trained models. Moreover, approaches that involve draft model training usually yield only modest speedups. This limitation arises from insufficient alignment with the target model, preventing higher token acceptance lengths. To address these challenges and achieve greater speedups, we propose SubSpec, a plug-and-play method to accelerate parameter offloading that is lossless and training-free. SubSpec constructs a highly aligned draft model by generating low-bit quantized substitute layers from offloaded target LLM portions. Additionally, our method shares the remaining GPU-resident layers and the KV-Cache, further reducing memory overhead and enhance alignment. SubSpec achieves a high average acceptance length, delivering 9.1x speedup for Qwen2.5 7B on MT-Bench (8GB VRAM limit) and an average of 12.5x speedup for Qwen2.5 32B on popular generation benchmarks (24GB VRAM limit).

Training and serving Large Language Models (LLMs) require partitioning data across multiple accelerators, where collective operations are frequently bottlenecked by network bandwidth. Lossless compression using Huffman codes is an effective way to alleviate the issue, however, its three-stage design requiring on-the-fly frequency analysis, codebook generation and transmission of codebook along with data introduces computational, latency and data overheads which are prohibitive for latency-sensitive scenarios such as die-to-die communication. This paper proposes a single-stage Huffman encoder that eliminates these overheads by using fixed codebooks derived from the average probability distribution of previous data batches. Through our analysis of the Gemma 2B model, we demonstrate that tensors exhibit high statistical similarity across layers and shards. Using this approach we achieve compression within 0.5% of per-shard Huffman coding and within 1% of the ideal Shannon compressibility, enabling efficient on-the-fly compression.

We present a novel inference scheme, self-speculative decoding, for accelerating Large Language Models (LLMs) without the need for an auxiliary model. This approach is characterized by a two-stage process: drafting and verification. The drafting stage generates draft tokens at a slightly lower quality but more quickly, which is achieved by selectively skipping certain intermediate layers during drafting Subsequently, the verification stage employs the original LLM to validate those draft output tokens in one forward pass. This process ensures the final output remains identical to that produced by the unaltered LLM, thereby maintaining output quality. The proposed method requires no additional neural network training and no extra memory footprint, making it a plug-and-play and cost-effective solution for inference acceleration. Benchmarks with LLaMA-2 and its fine-tuned models demonstrated a speedup up to 1.73times.

Generating ultra-long sequences with large language models (LLMs) has become increasingly crucial but remains a highly time-intensive task, particularly for sequences up to 100K tokens. While traditional speculative decoding methods exist, simply extending their generation limits fails to accelerate the process and can be detrimental. Through an in-depth analysis, we identify three major challenges hindering efficient generation: frequent model reloading, dynamic key-value (KV) management and repetitive generation. To address these issues, we introduce TOKENSWIFT, a novel framework designed to substantially accelerate the generation process of ultra-long sequences while maintaining the target model's inherent quality. Experimental results demonstrate that TOKENSWIFT achieves over 3 times speedup across models of varying scales (1.5B, 7B, 8B, 14B) and architectures (MHA, GQA). This acceleration translates to hours of time savings for ultra-long sequence generation, establishing TOKENSWIFT as a scalable and effective solution at unprecedented lengths. Code can be found at https://github.com/bigai-nlco/TokenSwift.

As Large Language Models (LLMs) can now process extremely long contexts, efficient inference over these extended inputs has become increasingly important, especially for emerging applications like LLM agents that highly depend on this capability. Speculative decoding (SD) offers a promising lossless acceleration technique compared to lossy alternatives such as quantization and model cascades. However, most state-of-the-art SD methods are trained on short texts (typically fewer than 4k tokens), making them unsuitable for long-context scenarios. Specifically, adapting these methods to long contexts presents three key challenges: (1) the excessive memory demands posed by draft models due to large Key-Value (KV) cache; (2) performance degradation resulting from the mismatch between short-context training and long-context inference; and (3) inefficiencies in tree attention mechanisms when managing long token sequences. This work introduces LongSpec, a framework that addresses these challenges through three core innovations: a memory-efficient draft model with a constant-sized KV cache; novel position indices that mitigate the training-inference mismatch; and an attention aggregation strategy that combines fast prefix computation with standard tree attention to enable efficient decoding. Experimental results confirm the effectiveness of LongSpec, achieving up to a 3.26x speedup over strong Flash Attention baselines across five long-context understanding datasets, as well as a 2.25x reduction in wall-clock time on the AIME24 long reasoning task with the QwQ model, demonstrating significant latency improvements for long-context applications. The code is available at https://github.com/sail-sg/LongSpec.

Speculative decoding has demonstrated its effectiveness in accelerating the inference of large language models while maintaining a consistent sampling distribution. However, the conventional approach of training a separate draft model to achieve a satisfactory token acceptance rate can be costly. Drawing inspiration from early exiting, we propose a novel self-speculative decoding framework Kangaroo, which uses a fixed shallow sub-network as a self-draft model, with the remaining layers serving as the larger target model. We train a lightweight and efficient adapter module on top of the sub-network to bridge the gap between the sub-network and the full model's representation ability. It is noteworthy that the inference latency of the self-draft model may no longer be negligible compared to the large model, necessitating strategies to increase the token acceptance rate while minimizing the drafting steps of the small model. To address this challenge, we introduce an additional early exiting mechanism for generating draft tokens. Specifically, we halt the small model's subsequent prediction during the drafting phase once the confidence level for the current token falls below a certain threshold. Extensive experiments on the Spec-Bench demonstrate the effectiveness of Kangaroo. Under single-sequence verification, Kangaroo achieves speedups up to 1.68times on Spec-Bench, outperforming Medusa-1 with 88.7\% fewer additional parameters (67M compared to 591M). The code for Kangaroo is available at https://github.com/Equationliu/Kangaroo.

Document understanding and GUI interaction are among the highest-value applications of Vision-Language Models (VLMs), yet they impose exceptionally heavy computational burden: fine-grained text and small UI elements demand high-resolution inputs that produce tens of thousands of visual tokens. We observe that this cost is largely wasteful -- across document and GUI benchmarks, only 22--71\% of image patches are pixel-unique, the rest being exact duplicates of another patch in the same image. We propose PixelPrune, which exploits this pixel-level redundancy through predictive-coding-based compression, pruning redundant patches before the Vision Transformer (ViT) encoder. Because it operates in pixel space prior to any neural computation, PixelPrune accelerates both the ViT encoder and the downstream LLM, covering the full inference pipeline. The method is training-free, requires no learnable parameters, and supports pixel-lossless compression (τ{=}0) as well as controlled lossy compression (τ{>}0). Experiments across three model scales and document and GUI benchmarks show that PixelPrune maintains competitive task accuracy while delivering up to 4.2times inference speedup and 1.9times training acceleration. Code is available at https://github.com/OPPO-Mente-Lab/PixelPrune.

Denoising generative models deliver high-fidelity generation but remain bottlenecked by inference latency due to the many iterative denoiser calls required during sampling. Training-free acceleration methods reduce latency by either sparsifying the model architecture or shortening the sampling trajectory. Current training-free acceleration methods are more complex than necessary: higher-order predictors amplify error under aggressive speedups, and architectural modifications hinder deployment. Beyond 2x acceleration, step skipping creates structural scarcity -- at most one fresh evaluation per local window -- leaving the computed output and its backward difference as the only causally grounded information. Based on this, we propose ZEUS, an acceleration method that predicts reduced denoiser evaluations using a second-order predictor, and stabilizes aggressive consecutive skipping with an interleaved scheme that avoids back-to-back extrapolations. ZEUS adds essentially zero overhead, no feature caches, and no architectural modifications, and it is compatible with different backbones, prediction objectives, and solver choices. Across image and video generation, ZEUS consistently improves the speed-fidelity performance over recent training-free baselines, achieving up to 3.2x end-to-end speedup while maintaining perceptual quality. Our code is available at: https://github.com/Ting-Justin-Jiang/ZEUS.

Accelerating inference in Large Language Models (LLMs) is critical for real-time interactions, as they have been widely incorporated into real-world services. Speculative decoding, a fully algorithmic solution, has gained attention for improving inference speed by drafting and verifying tokens, thereby generating multiple tokens in a single forward pass. However, current drafting strategies usually require significant fine-tuning or have inconsistent performance across tasks. To address these challenges, we propose Hierarchy Drafting (HD), a novel lossless drafting approach that organizes various token sources into multiple databases in a hierarchical framework based on temporal locality. In the drafting step, HD sequentially accesses multiple databases to obtain draft tokens from the highest to the lowest locality, ensuring consistent acceleration across diverse tasks and minimizing drafting latency. Our experiments on Spec-Bench using LLMs with 7B and 13B parameters demonstrate that HD outperforms existing database drafting methods, achieving robust inference speedups across model sizes, tasks, and temperatures.

Diffusion-based Large Language Models(DLLMs) enable parallel generation via Semi-Autoregressive (SAR) decoding in text generation. However, current methods suffer from severe operator-level redundancy: they recompute the entire sequence during denoising steps, ignoring that the prefix and masked suffix remain invariant within a block. We propose LaCache, a training-free acceleration framework that alleviates this redundancy through lossless caching and mixed precision. Specifically, LaCache employs Lossless State Memoization (LSM) by caching three types of intermediate results: (i) EmbedCache for embedding outputs, (ii) RoPECache for token-wise pre-attention states, and (iii) FACache for the online softmax statistics within FlashAttention. These caches allow the model to skip redundant computation on unchanged tokens without altering the output. To further alleviate memory-bandwidth bottlenecks, LaCache inegrates a per-group FP8 quantization strategy for FFN layers, tailored to step-dependent activation distributions across the diffusion process. Experiments demonstrate that LaCache alone achieves approximately 1.3X end-to-end speedup over vanilla DLLM. When combined with existing acceleration methods, LaCache reaches up to 40.2X end-to-end speedup while maintaining comparable task accuracy.

Large Language Models (LLMs) rely on attention mechanisms whose time complexity grows quadratically with input sequence length, creating significant computational bottlenecks during the prefilling stage. Existing static sparse attention methods typically degrade accuracy, while dynamic sparsity methods introduce additional computational overhead due to runtime sparse index estimation. To address these limitations, we propose TriangleMix, a novel training-free static attention pattern. TriangleMix employs dense attention in shallow layers and switches to a triangle-shaped sparse pattern in deeper layers. Extensive experiments demonstrate that TriangleMix reduces attention overhead by 3.7x to 15.3x in deep layers, and decreases overall Time-to-First-Token (TTFT) by 12% to 32% for sequence lengths ranging from 32K to 128K, without sacrificing model accuracy. Moreover, TriangleMix can be seamlessly integrated with dynamic sparsity methods to achieve further speedup, e.g. accelerating MInference by 19% at 128K, highlighting its potential to enhance LLM inference efficiency.

Recent advances in 1-bit Large Language Models (LLMs), such as BitNet and BitNet b1.58, present a promising approach to enhancing the efficiency of LLMs in terms of speed and energy consumption. These developments also enable local LLM deployment across a broad range of devices. In this work, we introduce bitnet.cpp, a tailored software stack designed to unlock the full potential of 1-bit LLMs. Specifically, we develop a set of kernels to support fast and lossless inference of ternary BitNet b1.58 LLMs on CPUs. Extensive experiments demonstrate that bitnet.cpp achieves significant speedups, ranging from 2.37x to 6.17x on x86 CPUs and from 1.37x to 5.07x on ARM CPUs, across various model sizes. The code is available at https://github.com/microsoft/BitNet.

Recent advances in large language model (LLM) pretraining have led to high-quality LLMs with impressive abilities. By compressing such LLMs via quantization to 3-4 bits per parameter, they can fit into memory-limited devices such as laptops and mobile phones, enabling personalized use. However, quantization down to 3-4 bits per parameter usually leads to moderate-to-high accuracy losses, especially for smaller models in the 1-10B parameter range, which are well-suited for edge deployments. To address this accuracy issue, we introduce the Sparse-Quantized Representation (SpQR), a new compressed format and quantization technique which enables for the first time near-lossless compression of LLMs across model scales, while reaching similar compression levels to previous methods. SpQR works by identifying and isolating outlier weights, which cause particularly-large quantization errors, and storing them in higher precision, while compressing all other weights to 3-4 bits, and achieves relative accuracy losses of less than 1% in perplexity for highly-accurate LLaMA and Falcon LLMs. This makes it possible to run 33B parameter LLM on a single 24 GB consumer GPU without any performance degradation at 15% speedup thus making powerful LLMs available to consumer without any downsides. SpQR comes with efficient algorithms for both encoding weights into its format, as well as decoding them efficiently at runtime. Specifically, we provide an efficient GPU inference algorithm for SpQR which yields faster inference than 16-bit baselines at similar accuracy, while enabling memory compression gains of more than 4x.

Large language models (LLMs) commonly employ autoregressive generation during inference, leading to high memory bandwidth demand and consequently extended latency. To mitigate this inefficiency, we present Bi-directional Tuning for lossless Acceleration (BiTA), an innovative method expediting LLMs via streamlined semi-autoregressive generation and draft verification. Inspired by the concept of prompt tuning, we enhance LLMs with a parameter-efficient design called bi-directional tuning for the capability in semi-autoregressive generation. Employing efficient tree-based decoding, the models perform draft candidate generation and verification in parallel, ensuring outputs identical to their autoregressive counterparts under greedy sampling. BiTA serves as a lightweight plug-in module, seamlessly boosting the inference efficiency of existing LLMs without requiring additional assistance models or incurring significant extra memory costs. Applying the proposed BiTA, LLaMA-2-70B-Chat achieves a 2.7times speedup on the MT-Bench benchmark. Extensive experiments confirm our method surpasses state-of-the-art acceleration techniques.

Large language models (LLMs) have demonstrated remarkable capabilities across various tasks. However, their widespread application is hindered by the resource-intensive decoding process. To address this challenge, current approaches have incorporated additional decoding heads to enable parallel prediction of multiple subsequent tokens, thereby achieving inference acceleration. Nevertheless, the accuracy of these decoding heads falls short of the auto-regressive decoding approach. In light of these limitations, we propose Chimera, a novel framework specifically designed for speculative sampling. Within this framework, we introduce a lightweight draft model that effectively utilizes previously generated tokens to predict subsequent words. To ensure both accuracy and efficiency, we present two strategies within the lightweight draft model. Firstly, we focus on capturing short-range dependencies at the bottom layer. Secondly, we leverage the readily available representations from the original LLM.Through empirical evaluation on the Vicuna and LlaMA-2 series, Chimera demonstrates impressive results, achieving an average latency speedup ratio of 2.7x compared to the vanilla auto-regressive decoding approach. This highlights the potential of our proposed framework in significantly improving the efficiency of large language models during the decoding process.

Quantized training of Large Language Models (LLMs) remains an open challenge, as maintaining accuracy while performing all matrix multiplications in low precision has proven difficult. This is particularly the case when fine-tuning pre-trained models, which often already have large weight and activation outlier values that render quantized optimization difficult. We present HALO, a novel quantization-aware training approach for Transformers that enables accurate and efficient low-precision training by combining 1) strategic placement of Hadamard rotations in both forward and backward passes, to mitigate outliers during the low-precision computation, 2) FSDP integration for low-precision communication, and 3) high-performance kernel support. Our approach ensures that all large matrix multiplications during the forward and backward passes are executed in lower precision. Applied to LLAMA-family models, HALO achieves near-full-precision-equivalent results during fine-tuning on various tasks, while delivering up to 1.31x end-to-end speedup for full fine-tuning on RTX 4090 GPUs. Our method supports both standard and parameter-efficient fine-tuning (PEFT) methods, both backed by efficient kernel implementations. Our results demonstrate the first practical approach to fully quantized LLM fine-tuning that maintains accuracy in FP8 precision, while delivering performance benefits.

Due to the auto-regressive nature of current video large language models (Video-LLMs), the inference latency increases as the input sequence length grows, posing challenges for the efficient processing of video sequences that are usually very long. We observe that during decoding, the attention scores of most tokens in Video-LLMs tend to be sparse and concentrated, with only certain tokens requiring comprehensive full attention. Based on this insight, we introduce Sparse-to-Dense (StD), a novel decoding strategy that integrates two distinct modules: one leveraging sparse top-K attention and the other employing dense full attention. These modules collaborate to accelerate Video-LLMs without loss. The fast (sparse) model speculatively decodes multiple tokens, while the slow (dense) model verifies them in parallel. StD is a tuning-free, plug-and-play solution that achieves up to a 1.94times walltime speedup in video processing. It maintains model performance while enabling a seamless transition from a standard Video-LLM to a sparse Video-LLM with minimal code modifications.

Accelerating the inference of large language models (LLMs) is a critical challenge in generative AI. Speculative decoding (SD) methods offer substantial efficiency gains by generating multiple tokens using a single target forward pass. However, existing SD approaches require the drafter and target models to share the same vocabulary, thus limiting the pool of possible drafters, often necessitating the training of a drafter from scratch. We present three new SD methods that remove this shared-vocabulary constraint. All three methods preserve the target distribution (i.e., they are lossless) and work with off-the-shelf models without requiring additional training or modifications. Empirically, on summarization, programming, and long-context tasks, our algorithms achieve significant speedups over standard autoregressive decoding. By enabling any off-the-shelf model to serve as drafter and requiring no retraining, this work substantially broadens the applicability of the SD framework in practice.

Communication has emerged as a critical bottleneck in the distributed training of large language models (LLMs). While numerous approaches have been proposed to reduce communication overhead, the potential of lossless compression has remained largely underexplored since compression and decompression typically consume larger overheads than the benefits of reduced communication traffic. We observe that the communication data, including activations, gradients and parameters, during training often follows a near-Gaussian distribution, which is a key feature for data compression. Thus, we introduce ZipCCL, a lossless compressed communication library of collectives for LLM training. ZipCCL is equipped with our novel techniques: (1) theoretically grounded exponent coding that exploits the Gaussian distribution of LLM tensors to accelerate compression without expensive online statistics, (2) GPU-optimized compression and decompression kernels that carefully design memory access patterns and pipeline using communication-aware data layout, and (3) adaptive communication strategies that dynamically switch collective operations based on workload patterns and system characteristics. Evaluated on a 64-GPU cluster using both mixture-of-experts and dense transformer models, ZipCCL reduces communication time by up to 1.35times and achieves end-to-end training speedups of up to 1.18times without any impact on model quality.

The key-value (KV) cache has become the dominant memory cost of transformer inference: it grows with batch size, context length, and depth, and at long context it, rather than the model weights, sets the throughput ceiling. Existing reductions fall into two families. Low-rank methods factor two-dimensional slices of the cache, either per-head matrices or cross-layer feature blocks, and quantization methods lower the bit-width of every entry. Neither exploits the fact that the cache at a layer is naturally a third-order tensor whose three axes, the heads, the tokens, and the features, carry very different amounts of redundancy. We take this tensor view directly. Our method, JoLT (Joint Lagrangian Tucker), applies a partial Tucker decomposition that compresses only the token and feature axes while leaving the head and layer axes intact, then restores the energy that truncation discards with a rotated low-bit residual: a random orthogonal rotation followed by low-bit quantization. A single Lagrangian dual allocates the Tucker ranks and the residual bit-widths together, per layer group and separately for keys and values, under one byte budget. The result is a near-lossless 2-3x compression. Perplexity stays near-lossless on both a grouped-query-attention model (Mistral-7B-v0.3) and a multi-head-attention model (LLaMA-2-13B), and GSM8K accuracy and needle-in-a-haystack retrieval hold at the uncompressed baseline at 2x on both architectures and through 3x on the GQA model. At 2x, JoLT reconstructs the cache to relative Frobenius error 0.009 (K) and 0.006 (V) on both architectures. A randomized-SVD variant, FlashJoLT, delivers a 5-13x compression-time speedup at 1024-token context and matched quality.

Diffusion Large Language Models (DLLMs) have emerged as a new paradigm of language modeling beyond autoregressive next-token prediction. Thanks to their bidirectional attention mechanism, DLLMs are more capable of capturing the connection of context, and thus show unique advantages in challenges like the famous "reversal curse" or learning under data-constrained scenarios. In addition, taking advantage of their inherent modeling foundations, DLLMs have the great potential of efficient inference with parallel decoding algorithms, which enable multi-token prediction per step. However, the high generation quality often requires the number of decoding steps equal to the sequence length, which performs a one-token-per-step decoding, and existing parallel decoding algorithms, which yield suboptimal decoding paths, bring inference speedup at the cost of non-negligible performance degradation. To overcome this challenge, we introduce Free Draft-and-Verification (FreeDave), a novel fast decoding algorithm tailored for DLLMs that achieves lossless parallel decoding without any model modification or extra modules. Specifically, we propose an algorithm of parallel-decoded candidate generation and verification, which is theoretically guaranteed to use the fewest model forward calls to reproduce the same sequence generated by static decoding when enough computation and memory budget is provided. By extensive evaluations on math reasoning and code generation benchmarks across different DLLMs, FreeDave is proven to boost the inference throughput up to 3.78times without performance degradation.

Diffusion Large Language Models (dLLMs) offer fast, parallel token generation, but their standalone use is plagued by an inherent efficiency-quality tradeoff. We show that, if carefully applied, the attributes of dLLMs can actually be a strength for drafters in speculative decoding with autoregressive (AR) verifiers. Our core insight is that dLLM's speed from parallel decoding drastically lowers the risk of costly rejections, providing a practical mechanism to effectively realize the (elusive) lengthy drafts that lead to large speedups with speculative decoding. We present FailFast, a dLLM-based speculative decoding framework that realizes this approach by dynamically adapting its speculation length. It "fails fast" by spending minimal compute in hard-to-speculate regions to shrink speculation latency and "wins big" by aggressively extending draft lengths in easier regions to reduce verification latency (in many cases, speculating and accepting 70 tokens at a time!). Without any fine-tuning, FailFast delivers lossless acceleration of AR LLMs and achieves up to 4.9times speedup over vanilla decoding, 1.7times over the best naive dLLM drafter, and 1.4times over EAGLE-3 across diverse models and workloads. We open-source FailFast at https://github.com/ruipeterpan/failfast.

While diffusion models have achieved great success in the field of video generation, this progress is accompanied by a rapidly escalating computational burden. Among the existing acceleration methods, Feature Caching is popular due to its training-free property and considerable speedup performance, but it inevitably faces semantic and detail drop with further compression. Another widely adopted method, training-aware step-distillation, though successful in image generation, also faces drastic degradation in video generation with a few steps. Furthermore, the quality loss becomes more severe when simply applying training-free feature caching to the step-distilled models, due to the sparser sampling steps. This paper novelly introduces a distillation-compatible learnable feature caching mechanism for the first time. We employ a lightweight learnable neural predictor instead of traditional training-free heuristics for diffusion models, enabling a more accurate capture of the high-dimensional feature evolution process. Furthermore, we explore the challenges of highly compressed distillation on large-scale video models and propose a conservative Restricted MeanFlow approach to achieve more stable and lossless distillation. By undertaking these initiatives, we further push the acceleration boundaries to 11.8times while preserving generation quality. Extensive experiments demonstrate the effectiveness of our method. The code will be made publicly available soon.

Post-training compression is currently divided into two contrasting regimes. On the one hand, fast, data-free, and model-agnostic methods (e.g., NF4 or HQQ) offer maximum accessibility but suffer from functional collapse at extreme bit-rates below 4 bits. On the other hand, techniques leveraging calibration data or extensive recovery training achieve superior fidelity but impose high computational constraints and face uncertain robustness under data distribution shifts. We introduce EntQuant, a framework that unites the advantages of these distinct paradigms. By matching the performance of data-dependent methods with the speed and universality of data-free techniques, EntQuant enables practical utility in the extreme compression regime. Our method decouples numerical precision from storage cost via entropy coding, compressing a 70B parameter model in less than 10 minutes. We demonstrate that EntQuant does not only achieve state-of-the-art results on standard evaluation sets and models, but also retains functional performance on more complex benchmarks with instruction-tuned models, all at modest inference overhead.

The ability to handle long texts is one of the most important capabilities of Large Language Models (LLMs), but as the text length increases, the consumption of resources also increases dramatically. At present, reducing resource consumption by compressing the KV cache is a common approach. Although there are many existing compression methods, they share a common drawback: the compression is not lossless. That is, information is inevitably lost during the compression process. If the compression rate is high, the probability of losing important information increases dramatically. We propose a new method, Lossless Compressed Memory Attention (LoMA), which allows for lossless compression of information into special memory token KV pairs according to a set compression ratio. Our experiments have achieved remarkable results, demonstrating that LoMA can be efficiently trained and has very effective performance.

Large Language Models (LLMs) have grown rapidly in size, creating significant challenges for efficient deployment on resource-constrained hardware. In this paper, we introduce Dynamic-Length Float (DFloat11), a lossless compression framework that reduces LLM size by 30% while preserving outputs that are bit-for-bit identical to the original model. DFloat11 is motivated by the low entropy in the BFloat16 weight representation of LLMs, which reveals significant inefficiency in existing storage format. By applying entropy coding, DFloat11 assigns dynamic-length encodings to weights based on frequency, achieving near information-optimal compression without any loss of precision. To facilitate efficient inference with dynamic-length encodings, we develop a custom GPU kernel for fast online decompression. Our design incorporates the following: (i) decomposition of memory-intensive lookup tables (LUTs) into compact LUTs that fit in GPU SRAM, (ii) a two-phase kernel for coordinating thread read/write positions using lightweight auxiliary variables, and (iii) transformer-block-level decompression to minimize latency. Experiments on recent models, including Llama-3.1, Qwen-2.5, and Gemma-3, validates our hypothesis that DFloat11 achieves around 30% model size reduction while preserving bit-for-bit exact outputs. Compared to a potential alternative of offloading parts of an uncompressed model to the CPU to meet memory constraints, DFloat11 achieves 1.9-38.8x higher throughput in token generation. With a fixed GPU memory budget, DFloat11 enables 5.3-13.17x longer context lengths than uncompressed models. Notably, our method enables lossless inference of Llama-3.1-405B, an 810GB model, on a single node equipped with 8x80GB GPUs. Our code and models are available at https://github.com/LeanModels/DFloat11.

Diffusion models have achieved remarkable success in image and video generation, yet the high computational cost of iterative sampling remains a critical bottleneck for practical deployment. Feature caching has emerged as a promising acceleration paradigm by reusing or predicting intermediate features across timesteps. However, existing training-free methods apply uniform prediction strategies that cannot adapt to the heterogeneous feature dynamics, causing significant quality degradation under high acceleration ratios. We propose LinCa, a feature caching framework based on learnable invertible networks. LinCa decomposes cached features into sub-components with distinct continuity properties via a lightweight invertible network and applies differentiated prediction orders matched to each component. The strict invertibility guarantees lossless reconstruction back to the original feature space, forming a unified Decompose-Predict-Reconstruct pipeline. By training separate predictors for different models and timestep segments, LinCa adapts to heterogeneous feature dynamics. Experiments on FLUX, Qwen-Image, and HunyuanVideo demonstrate that LinCa, with less than 0.2% additional parameters, significantly outperforms existing methods and maintains near-lossless quality at 5-7x speedup. Code: https://github.com/QHR69/LinCa

With the growth of model sizes and scale of their deployment, their sheer size burdens the infrastructure requiring more network and more storage to accommodate these. While there is a vast literature about reducing model sizes, we investigate a more traditional type of compression -- one that compresses the model to a smaller form and is coupled with a decompression algorithm that returns it to its original size -- namely lossless compression. Somewhat surprisingly, we show that such lossless compression can gain significant network and storage reduction on popular models, at times reducing over 50% of the model size. We investigate the source of model compressibility, introduce compression variants tailored for models and categorize models to compressibility groups. We also introduce a tunable lossy compression technique that can further reduce size even on the less compressible models with little to no effect on the model accuracy. We estimate that these methods could save over an ExaByte per month of network traffic downloaded from a large model hub like HuggingFace.

In this paper, we present \textit{FasterCache}, a novel training-free strategy designed to accelerate the inference of video diffusion models with high-quality generation. By analyzing existing cache-based methods, we observe that directly reusing adjacent-step features degrades video quality due to the loss of subtle variations. We further perform a pioneering investigation of the acceleration potential of classifier-free guidance (CFG) and reveal significant redundancy between conditional and unconditional features within the same timestep. Capitalizing on these observations, we introduce FasterCache to substantially accelerate diffusion-based video generation. Our key contributions include a dynamic feature reuse strategy that preserves both feature distinction and temporal continuity, and CFG-Cache which optimizes the reuse of conditional and unconditional outputs to further enhance inference speed without compromising video quality. We empirically evaluate FasterCache on recent video diffusion models. Experimental results show that FasterCache can significantly accelerate video generation (\eg 1.67times speedup on Vchitect-2.0) while keeping video quality comparable to the baseline, and consistently outperform existing methods in both inference speed and video quality.

Training-free acceleration has emerged as an advanced research area in video generation based on diffusion models. The redundancy of latents in diffusion model inference provides a natural entry point for acceleration. In this paper, we decompose the inference process into the encoding, denoising, and decoding stages, and observe that cache-based acceleration methods often lead to substantial memory surges in the latter two stages. To address this problem, we analyze the characteristics of inference across different stages and propose stage-specific strategies for reducing memory consumption: 1) Asynchronous Cache Swapping. 2) Feature chunk. 3) Slicing latents to decode. At the same time, we ensure that the time overhead introduced by these three strategies remains lower than the acceleration gains themselves. Compared with the baseline, our approach achieves faster inference speed and lower memory usage, while maintaining quality degradation within an acceptable range. The Code is available at https://github.com/NKUShaw/LightCache .

Video Diffusion Transformers (DiTs) have demonstrated significant potential for generating high-fidelity videos but are computationally intensive. Existing acceleration methods include distillation, which requires costly retraining, and feature caching, which is highly sensitive to network architecture. Recent token reduction methods are training-free and architecture-agnostic, offering greater flexibility and wider applicability. However, they enforce the same sequence length across different components, constraining their acceleration potential. We observe that intra-sequence redundancy in video DiTs varies across features, blocks, and denoising timesteps. Building on this observation, we propose Asymmetric Reduction and Restoration (AsymRnR), a training-free approach to accelerate video DiTs. It offers a flexible and adaptive strategy that reduces the number of tokens based on their redundancy to enhance both acceleration and generation quality. We further propose matching cache to facilitate faster processing. Integrated into state-of-the-art video DiTs, AsymRnR achieves a superior speedup without compromising the quality.

Zero Redundancy Optimizer (ZeRO) has been used to train a wide range of large language models on massive GPUs clusters due to its ease of use, efficiency, and good scalability. However, when training on low-bandwidth clusters, or at scale which forces batch size per GPU to be small, ZeRO's effective throughput is limited because of high communication volume from gathering weights in forward pass, backward pass, and averaging gradients. This paper introduces three communication volume reduction techniques, which we collectively refer to as ZeRO++, targeting each of the communication collectives in ZeRO. First is block-quantization based all-gather. Second is data remapping that trades-off communication for more memory. Third is a novel all-to-all based quantized gradient averaging paradigm as replacement of reduce-scatter collective, which preserves accuracy despite communicating low precision data. Collectively, ZeRO++ reduces communication volume of ZeRO by 4x, enabling up to 2.16x better throughput at 384 GPU scale.

The massive volume of data generated by LiDAR sensors in autonomous vehicles creates a bottleneck for real-time processing and vehicle-to-everything (V2X) transmission. Existing lossless compression methods often force a trade-off: industry standard algorithms (e.g., LASzip) lack adaptability, while deep learning approaches suffer from prohibitive computational costs. This paper proposes LiZIP, a lightweight, near-lossless zero-drift compression framework based on neural predictive coding. By utilizing a compact Multi-Layer Perceptron (MLP) to predict point coordinates from local context, LiZIP efficiently encodes only the sparse residuals. We evaluate LiZIP on the NuScenes and Argoverse datasets, benchmarking against GZip, LASzip, and Google Draco (configured with 24-bit quantization to serve as a high-precision geometric baseline). Results demonstrate that LiZIP consistently achieves superior compression ratios across varying environments. The proposed system achieves a 7.5%-14.8% reduction in file size compared to the industry-standard LASzip and outperforms Google Draco by 8.8%-11.3% across diverse datasets. Furthermore, the system demonstrates generalization capabilities on the unseen Argoverse dataset without retraining. Against the general purpose GZip algorithm, LiZIP achieves a reduction of 38%-48%. This efficiency offers a distinct advantage for bandwidth constrained V2X applications and large scale cloud archival.

Modern data compression methods are slowly reaching their limits after 80 years of research, millions of papers, and wide range of applications. Yet, the extravagant 6G communication speed requirement raises a major open question for revolutionary new ideas of data compression. We have previously shown all understanding or learning are compression, under reasonable assumptions. Large language models (LLMs) understand data better than ever before. Can they help us to compress data? The LLMs may be seen to approximate the uncomputable Solomonoff induction. Therefore, under this new uncomputable paradigm, we present LMCompress. LMCompress shatters all previous lossless compression algorithms, doubling the lossless compression ratios of JPEG-XL for images, FLAC for audios, and H.264 for videos, and quadrupling the compression ratio of bz2 for texts. The better a large model understands the data, the better LMCompress compresses.

Neural network (NN) compression via techniques such as pruning, quantization requires setting compression hyperparameters (e.g., number of channels to be pruned, bitwidths for quantization) for each layer either manually or via neural architecture search (NAS) which can be computationally expensive. We address this problem by providing an end-to-end technique that optimizes for model's Floating Point Operations (FLOPs) or for on-device latency via a novel ell_1{ell_2} latency surrogate. Our algorithm is versatile and can be used with many popular compression methods including pruning, low-rank factorization, and quantization. Crucially, it is fast and runs in almost the same amount of time as single model training; which is a significant training speed-up over standard NAS methods. For BERT compression on GLUE fine-tuning tasks, we achieve 50% reduction in FLOPs with only 1% drop in performance. For compressing MobileNetV3 on ImageNet-1K, we achieve 15% reduction in FLOPs, and 11% reduction in on-device latency without drop in accuracy, while still requiring 3times less training compute than SOTA compression techniques. Finally, for transfer learning on smaller datasets, our technique identifies 1.2times-1.4times cheaper architectures than standard MobileNetV3, EfficientNet suite of architectures at almost the same training cost and accuracy.

While diffusion language models (DLMs) offer a promising alternative to autoregressive models (ARs), existing open-source DLMs suffer from high inference latency. This bottleneck is mainly due to the attention's quadratic complexity with respect to context length in computing all query-key pairs. Intuitively, to reduce this complexity, a natural strategy is to restrict attention to sparse patterns that retain only the most relevant connections. Such approaches are well-established in ARs, where attention follows fixed and clearly defined sparse patterns. However, in DLMs, we observe distinct sparsity behaviors: (1) attention patterns vary across heads, (2) attention patterns in each head remain highly similar across denoising steps, and (3) early denoising steps are critical for generation. These findings render sparse attention methods designed for ARs largely incompatible with DLMs, as they fail to capture head-specific structures and risk degrading generation when applied in early denoising steps. To address these challenges, we propose SparseD, a novel sparse attention method for DLMs. Leveraging the observations, SparseD only requires pre-computing head-specific sparse patterns one time, and reuses them across all steps. This prevents recomputing sparse patterns at each denoising step. Meanwhile, SparseD uses full attention in the early steps, then switches to sparse attention later to maintain generation quality. Together, these establish SparseD as a practical and efficient solution for deploying DLMs in long-context applications. Experimental results demonstrate that SparseD achieves lossless acceleration, delivering up to 1.50times speedup over FlashAttention at a 64k context length with 1,024 denoising steps.

In this paper, the problem of optimal gradient lossless compression in Deep Neural Network (DNN) training is considered. Gradient compression is relevant in many distributed DNN training scenarios, including the recently popular federated learning (FL) scenario in which each remote users are connected to the parameter server (PS) through a noiseless but rate limited channel. In distributed DNN training, if the underlying gradient distribution is available, classical lossless compression approaches can be used to reduce the number of bits required for communicating the gradient entries. Mean field analysis has suggested that gradient updates can be considered as independent random variables, while Laplace approximation can be used to argue that gradient has a distribution approximating the normal (Norm) distribution in some regimes. In this paper we argue that, for some networks of practical interest, the gradient entries can be well modelled as having a generalized normal (GenNorm) distribution. We provide numerical evaluations to validate that the hypothesis GenNorm modelling provides a more accurate prediction of the DNN gradient tail distribution. Additionally, this modeling choice provides concrete improvement in terms of lossless compression of the gradients when applying classical fix-to-variable lossless coding algorithms, such as Huffman coding, to the quantized gradient updates. This latter results indeed provides an effective compression strategy with low memory and computational complexity that has great practical relevance in distributed DNN training scenarios.

The increasing complexity of large language models (LLMs) necessitates efficient training strategies to mitigate the high computational costs associated with distributed training. A significant bottleneck in this process is gradient synchronization across multiple GPUs, particularly in the zero-redundancy parallelism mode. In this paper, we introduce Transformer-Aware Gradient Compression (TAGC), an optimized gradient compression algorithm designed specifically for transformer-based models. TAGC extends the lossless homomorphic compression method by adapting it for sharded models and incorporating transformer-specific optimizations, such as layer-selective compression and dynamic sparsification. Our experimental results demonstrate that TAGC accelerates training by up to 15% compared to the standard Fully Sharded Data Parallel (FSDP) approach, with minimal impact on model quality. We integrate TAGC into the PyTorch FSDP framework, the implementation is publicly available at https://github.com/ipolyakov/TAGC.

LiDAR point clouds are fundamental to various applications, yet the extreme sparsity of high-precision geometric details hinders efficient context modeling, thereby limiting the compression speed and performance of existing methods. To address this challenge, we propose a compact representation for efficient predictive lossless coding. Our framework comprises two lightweight modules. First, the Geometry Re-Densification Module iteratively densifies encoded sparse geometry, extracts features at a dense scale, and then sparsifies the features for predictive coding. This module avoids costly computation on highly sparse details while maintaining a lightweight prediction head. Second, the Cross-scale Feature Propagation Module leverages occupancy cues from multiple resolution levels to guide hierarchical feature propagation, enabling information sharing across scales and reducing redundant feature extraction. Additionally, we introduce an integer-only inference pipeline to enable bit-exact cross-platform consistency, which avoids the entropy-coding collapse observed in existing neural compression methods and further accelerates coding. Experiments demonstrate competitive compression performance at real-time speed. Code will be released upon acceptance. Code is available at https://github.com/pengpeng-yu/FastPCC.

Key-value (KV) caching has become the de-facto to accelerate generation speed for large language models (LLMs) inference. However, the growing cache demand with increasing sequence length has transformed LLM inference to be a memory bound problem, significantly constraining the system throughput. Existing methods rely on dropping unimportant tokens or quantizing all entries uniformly. Such methods, however, often incur high approximation errors to represent the compressed matrices. The autoregressive decoding process further compounds the error of each step, resulting in critical deviation in model generation and deterioration of performance. To tackle this challenge, we propose GEAR, an efficient KV cache compression framework that achieves near-lossless high-ratio compression. GEAR first applies quantization to majority of entries of similar magnitudes to ultra-low precision. It then employs a low rank matrix to approximate the quantization error, and a sparse matrix to remedy individual errors from outlier entries. By adeptly integrating three techniques, GEAR is able to fully exploit their synergistic potentials. Our experiments demonstrate that compared to alternatives, GEAR achieves near-lossless 4-bit KV cache compression with up to 2.38x throughput improvement, while reducing peak-memory size up to 2.29x. Our code is publicly available at https://github.com/HaoKang-Timmy/GEAR.

Training-free token reduction accelerates vision transformers by removing redundant tokens across layers, recovering most of the original accuracy at a fraction of the compute. These methods, however, are designed and evaluated primarily on clean data, and under real-world distribution shift their accuracy gap to the uncompressed model widens with the removal rate. We show that this gap is governed by the reduction schedule, the depth profile of removal, usually left fixed as an implementation detail. Concretely, we introduce a one-parameter late-concentrated power-law schedule that consistently improves out-of-distribution accuracy over flat at no extra inference cost. On ImageNet-C with DeiT-S, the late schedule closes 83% of that gap at a 26% compute reduction (+1.17pp), and 99% of it at a lighter 7% reduction (+0.26pp). The gain cannot be attributed to retaining more tokens or using extra compute: held to flat's compute, the late schedule removes more tokens in total and leaves fewer tokens at the end, yet still wins. Single-layer probes point to a mechanism: earlier reductions perturb features that pass through more remaining layers, front-loading reduction error in depth. The effect is broad, holding across five token-reduction methods (ToMe, EViT, ATS, ATC, PiToMe), nine backbones, all ImageNet-C corruption types, eight further shift suites, and two further modalities, video and vision-language QA. It is also specific to shift, still positive on clean and rising monotonically to ~4x that at the highest severity 5. The schedule keeps its gain under six test-time adaptation methods, and needs no per-input or per-domain tuning.

Unified multimodal models have recently attracted considerable attention for their remarkable abilities in jointly understanding and generating diverse content. However, as contexts integrate increasingly numerous interleaved multimodal tokens, the iterative processes of diffusion denoising and autoregressive decoding impose significant computational overhead. To address this, we propose Hyper-Bagel, a unified acceleration framework designed to simultaneously speed up both multimodal understanding and generation tasks. Our approach uses a divide-and-conquer strategy, employing speculative decoding for next-token prediction and a multi-stage distillation process for diffusion denoising. The framework delivers substantial performance gains, achieving over a 2x speedup in multimodal understanding. For generative tasks, our resulting lossless 6-NFE model yields a 16.67x speedup in text-to-image generation and a 22x speedup in image editing, all while preserving the high-quality output of the original model. We further develop a highly efficient 1-NFE model that enables near real-time interactive editing and generation. By combining advanced adversarial distillation with human feedback learning, this model achieves ultimate cost-effectiveness and responsiveness, making complex multimodal interactions seamless and instantaneous.

Large deep learning models offer significant accuracy gains, but training billions to trillions of parameters is challenging. Existing solutions such as data and model parallelisms exhibit fundamental limitations to fit these models into limited device memory, while obtaining computation, communication and development efficiency. We develop a novel solution, Zero Redundancy Optimizer (ZeRO), to optimize memory, vastly improving training speed while increasing the model size that can be efficiently trained. ZeRO eliminates memory redundancies in data- and model-parallel training while retaining low communication volume and high computational granularity, allowing us to scale the model size proportional to the number of devices with sustained high efficiency. Our analysis on memory requirements and communication volume demonstrates: ZeRO has the potential to scale beyond 1 Trillion parameters using today's hardware. We implement and evaluate ZeRO: it trains large models of over 100B parameter with super-linear speedup on 400 GPUs, achieving throughput of 15 Petaflops. This represents an 8x increase in model size and 10x increase in achievable performance over state-of-the-art. In terms of usability, ZeRO can train large models of up to 13B parameters (e.g., larger than Megatron GPT 8.3B and T5 11B) without requiring model parallelism which is harder for scientists to apply. Last but not the least, researchers have used the system breakthroughs of ZeRO to create the world's largest language model (Turing-NLG, 17B parameters) with record breaking accuracy.

Data used for analytics and machine learning often take the form of tables with categorical entries. We introduce a family of lossless compression algorithms for such data that proceed in four steps: (i) Estimate latent variables associated to rows and columns; (ii) Partition the table in blocks according to the row/column latents; (iii) Apply a sequential (e.g. Lempel-Ziv) coder to each of the blocks; (iv) Append a compressed encoding of the latents. We evaluate it on several benchmark datasets, and study optimal compression in a probabilistic model for that tabular data, whereby latent values are independent and table entries are conditionally independent given the latent values. We prove that the model has a well defined entropy rate and satisfies an asymptotic equipartition property. We also prove that classical compression schemes such as Lempel-Ziv and finite-state encoders do not achieve this rate. On the other hand, the latent estimation strategy outlined above achieves the optimal rate.

A range of recent works addresses the problem of compression of sequence of tokens into a shorter sequence of real-valued vectors to be used as inputs instead of token embeddings or key-value cache. These approaches allow to reduce the amount of compute in existing language models. Despite relying on powerful models as encoders, the maximum attainable lossless compression ratio is typically not higher than x10. This fact is highly intriguing because, in theory, the maximum information capacity of large real-valued vectors is far beyond the presented rates even for 16-bit precision and a modest vector size. In this work, we explore the limits of compression by replacing the encoder with a per-sample optimization procedure. We show that vectors with compression ratios up to x1500 exist, which highlights two orders of magnitude gap between existing and practically attainable solutions. Furthermore, we empirically show that the compression limits are determined not by the length of the input but by the amount of uncertainty to be reduced, namely, the cross-entropy loss on this sequence without any conditioning. The obtained limits highlight the substantial gap between the theoretical capacity of input embeddings and their practical utilization, suggesting significant room for optimization in model design.

We present Nacrith, a lossless compression system that combines a 135M-parameter transformer language model (SmolLM2-135M) with an ensemble of lightweight online predictors and a 32-bit arithmetic coder. Beyond the base LLM-plus-arithmetic-coding paradigm, Nacrith introduces several contributions: (1) a CDF precision upgrade from 2^16 to 2^24 that eliminates ~75% of quantization overhead caused by minimum-probability floors in large vocabularies; (2) a token-level N-gram model for fast local predictions; (3) an adaptive log-space bias head correcting per-document LLM errors via online gradient descent; (4) confidence-based LLM skip for accelerating highly predictable tokens; (5) a hybrid binary format (NC06) extending neural compression to arbitrary binary files--to our knowledge a first among LLM-based compressors; (6) a llama.cpp inference backend achieving ~7x faster single-token decode than PyTorch; (7) parallel multi-GPU compression across up to 8 workers; and (8) native KV cache sliding window reducing per-slide cost by ~37x. The system requires only ~500 MB of GGUF weights and ~1.2 GB VRAM per worker, running on consumer GPUs. On alice29.txt (Canterbury Corpus, 152 KB), Nacrith achieves 0.918 bits per byte (bpb)--outperforming gzip by 3.1x, bzip2 by 2.5x, CMIX v21 by 44%, and ts_zip by 20%, while compressing below the 0th-, 1st-, and 2nd-order byte-level Shannon entropy bounds. On enwik8 (100 MB), Nacrith achieves 0.9389 bpb (11.74%), surpassing ts_zip (~1.11 bpb) by 15% and FineZip (1.024 bpb) by 8% despite using a 60x smaller model with no fine-tuning. An out-of-distribution evaluation on a document published after the model's training cutoff confirms these gains are not memorization artifacts, achieving 0.723 bpb on unseen text.

Efficient real-world deployments of large language models (LLMs) rely on Key-Value (KV) caching for processing and generating long outputs, reducing the need for repetitive computation. For large contexts, Key-Value caches can take up tens of gigabytes of device memory, as they store vector representations for each token and layer. Recent work has shown that the cached vectors can be compressed through quantization, pruning or merging, but these techniques often compromise quality towards higher compression rates. In this work, we aim to improve Key & Value compression by exploiting two observations: 1) the inherent dependencies between keys and values across different layers, and 2) high-compression mechanisms for internal network states. We propose AQUA-KV, an adaptive quantization for Key-Value caches that relies on compact adapters to exploit existing dependencies between Keys and Values, and aims to "optimally" compress the information that cannot be predicted. AQUA-KV significantly improves compression rates, while maintaining high accuracy on state-of-the-art LLM families. On Llama 3.2 LLMs, we achieve near-lossless inference at 2-2.5 bits per value with under 1% relative error in perplexity and LongBench scores. AQUA-KV is one-shot, simple, and efficient: it can be calibrated on a single GPU within 1-6 hours, even for 70B models.

The recently proposed Neural Local Lossless Compression (NeLLoC), which is based on a local autoregressive model, has achieved state-of-the-art (SOTA) out-of-distribution (OOD) generalization performance in the image compression task. In addition to the encouragement of OOD generalization, the local model also allows parallel inference in the decoding stage. In this paper, we propose two parallelization schemes for local autoregressive models. We discuss the practicalities of implementing the schemes and provide experimental evidence of significant gains in compression runtime compared to the previous, non-parallel implementation.

Parallel Speculative Decoding (PSD) accelerates traditional Speculative Decoding (SD) by overlapping draft generation with verification. However, it remains hampered by two fundamental challenges: (1) a theoretical speedup ceiling dictated by the speed ratio between the draft and target models, and (2) high computational waste and pipeline stall due to mid-sequence token rejections of early errors. To address these limitations, we introduce Double (Double Retrieval Speculative Parallelism). By bridging the gap between SD and PSD, our framework resolves the Retrieval Precision-Efficiency Dilemma through a novel synchronous mechanism. Specifically, we enable the draft model to execute iterative retrieval speculations to break the theoretical speedup limits; to alleviate rejections without rollback, the target model performs authoritative retrieval to generate multi-token guidance. Double is entirely training-free and lossless. Extensive experiments demonstrate state-of-the-art speedup of 5.3times on LLaMA3.3-70B and 2.8times on Qwen3-32B, significantly outperforming the advanced method EAGLE-3 that requires extensive model training.

Video generation models have demonstrated remarkable performance, yet their broader adoption remains constrained by slow inference speeds and substantial computational costs, primarily due to the iterative nature of the denoising process. Addressing this bottleneck is essential for democratizing advanced video synthesis technologies and enabling their integration into real-world applications. This work proposes EasyCache, a training-free acceleration framework for video diffusion models. EasyCache introduces a lightweight, runtime-adaptive caching mechanism that dynamically reuses previously computed transformation vectors, avoiding redundant computations during inference. Unlike prior approaches, EasyCache requires no offline profiling, pre-computation, or extensive parameter tuning. We conduct comprehensive studies on various large-scale video generation models, including OpenSora, Wan2.1, and HunyuanVideo. Our method achieves leading acceleration performance, reducing inference time by up to 2.1-3.3times compared to the original baselines while maintaining high visual fidelity with a significant up to 36% PSNR improvement compared to the previous SOTA method. This improvement makes our EasyCache a efficient and highly accessible solution for high-quality video generation in both research and practical applications. The code is available at https://github.com/H-EmbodVis/EasyCache.

Lossy image compression is pervasively conducted to save communication bandwidth, resulting in undesirable compression artifacts. Recently, extensive approaches have been proposed to reduce image compression artifacts at the decoder side; however, they require a series of architecture-identical models to process images with different quality, which are inefficient and resource-consuming. Besides, it is common in practice that compressed images are with unknown quality and it is intractable for existing approaches to select a suitable model for blind quality enhancement. In this paper, we propose a resource-efficient blind quality enhancement (RBQE) approach for compressed images. Specifically, our approach blindly and progressively enhances the quality of compressed images through a dynamic deep neural network (DNN), in which an early-exit strategy is embedded. Then, our approach can automatically decide to terminate or continue enhancement according to the assessed quality of enhanced images. Consequently, slight artifacts can be removed in a simpler and faster process, while the severe artifacts can be further removed in a more elaborate process. Extensive experiments demonstrate that our RBQE approach achieves state-of-the-art performance in terms of both blind quality enhancement and resource efficiency. The code is available at https://github.com/RyanXingQL/RBQE.

Diffusion Transformers (DiT) have revolutionized high-fidelity image and video synthesis, yet their computational demands remain prohibitive for real-time applications. To solve this problem, feature caching has been proposed to accelerate diffusion models by caching the features in the previous timesteps and then reusing them in the following timesteps. However, at timesteps with significant intervals, the feature similarity in diffusion models decreases substantially, leading to a pronounced increase in errors introduced by feature caching, significantly harming the generation quality. To solve this problem, we propose TaylorSeer, which firstly shows that features of diffusion models at future timesteps can be predicted based on their values at previous timesteps. Based on the fact that features change slowly and continuously across timesteps, TaylorSeer employs a differential method to approximate the higher-order derivatives of features and predict features in future timesteps with Taylor series expansion. Extensive experiments demonstrate its significant effectiveness in both image and video synthesis, especially in high acceleration ratios. For instance, it achieves an almost lossless acceleration of 4.99times on FLUX and 5.00times on HunyuanVideo without additional training. On DiT, it achieves 3.41 lower FID compared with previous SOTA at 4.53times acceleration. %Our code is provided in the supplementary materials and will be made publicly available on GitHub. Our codes have been released in Github:https://github.com/Shenyi-Z/TaylorSeer

Large language models (LLMs) have proven to be very superior to conventional methods in various tasks. However, their expensive computations and high memory requirements are prohibitive for deployment. Model quantization is an effective method for reducing this overhead. The problem is that in most previous works, the quantized model was calibrated using few samples from the training data, which might affect the generalization of the quantized LLMs to unknown cases and tasks. Hence in this work, we explore an important question: Can we design a data-independent quantization method for LLMs to guarantee its generalization performance? In this work, we propose EasyQuant, a training-free and data-independent weight-only quantization algorithm for LLMs. Our observation indicates that two factors: outliers in the weight and quantization ranges, are essential for reducing the quantization error. Therefore, in EasyQuant, we leave the outliers (less than 1%) unchanged and optimize the quantization range to reduce the reconstruction error. With these methods, we surprisingly find that EasyQuant achieves comparable performance to the original model. Since EasyQuant does not depend on any training data, the generalization performance of quantized LLMs is safely guaranteed. Moreover, EasyQuant can be implemented in parallel so that the quantized model could be attained in a few minutes even for LLMs over 100B. To our best knowledge, we are the first work that achieves almost lossless quantization performance for LLMs under a data-independent setting and our algorithm runs over 10 times faster than the data-dependent methods.

Diffusion-based Large Language Models (dLLMs) have emerged as a competitive alternative to autoregressive models, offering unique advantages through bidirectional attention and parallel generation paradigms. However, the generation results of current parallel decoding methods deviate from stepwise decoding, introducing potential performance degradation, which limits their practical deployment. To address this problem, we propose Self Speculative Decoding (SSD), a lossless inference acceleration method that leverages the dLLM itself as both speculative decoding drafter and verifier without auxiliary modules. SSD introduces a self-drafting mechanism where the model generates predictions for multiple positions, then verifies them through hierarchical verification trees in a single forward pass. Unlike traditional speculative decoding that requires separate draft models, SSD eliminates model redundancy and memory overhead by exploiting the dLLM's inherent parallel prediction capability for multiple positions. This self-speculative approach allows the model to progressively verify and accept multiple tokens in a single forward pass. Our experiments demonstrate that SSD achieves up to 3.46times speedup while keeping the output identical to stepwise decoding on open source models such as LLaDA and Dream. Code will be made publicly available on GitHub.

Balancing temporal resolution and spatial detail under limited compute budget remains a key challenge for video-based multi-modal large language models (MLLMs). Existing methods typically compress video representations using predefined rules before feeding them into the LLM, resulting in irreversible information loss and often ignoring input instructions. To address this, we propose a novel slow-fast architecture that naturally circumvents this trade-off, enabling the use of more input frames while preserving spatial details. Inspired by how humans first skim a video before focusing on relevant parts, our slow-fast design employs a dual-token strategy: 1) "fast" visual tokens -- a compact set of compressed video features -- are fed into the LLM alongside text embeddings to provide a quick overview; 2) "slow" visual tokens -- uncompressed video features -- are cross-attended by text embeddings through specially designed hybrid decoder layers, enabling instruction-aware extraction of relevant visual details with linear complexity. We conduct systematic exploration to optimize both the overall architecture and key components. Experiments show that our model significantly outperforms self-attention-only baselines, extending the input capacity from 16 to 128 frames with just a 3% increase in computation, and achieving a 16% average performance improvement across five video understanding benchmarks. Our 7B model achieves state-of-the-art performance among models of similar size. Furthermore, our slow-fast architecture is a plug-and-play design that can be integrated into other video MLLMs to improve efficiency and scalability.

There have been numerous attempts to distill quadratic attention-based large language models (LLMs) into sub-quadratic linearized architectures. However, despite extensive research, such distilled models often fail to match the performance of their teacher LLMs on various downstream tasks. We set out the goal of lossless distillation, which we define in terms of tolerance-corrected Win-and-Tie rates between student and teacher on sets of tasks. To this end, we introduce an effective distillation pipeline for xLSTM-based students. We propose an additional merging stage, where individually linearized experts are combined into a single model. We show the effectiveness of this pipeline by distilling base and instruction-tuned models from the Llama, Qwen, and Olmo families. In many settings, our xLSTM-based students recover most of the teacher's performance, and even exceed it on some downstream tasks. Our contributions are an important step towards more energy-efficient and cost-effective replacements for transformer-based LLMs.

Diffusion Transformers (DiTs) have demonstrated remarkable generative capabilities, particularly benefiting from Transformer architectures that enhance visual and artistic fidelity. However, their inherently sequential denoising process results in high inference latency, limiting their deployment in real-time scenarios. Existing training-free acceleration approaches typically reuse intermediate features at fixed timesteps or layers, overlooking the evolving semantic focus across denoising stages and Transformer blocks.To address this, we propose Sortblock, a training-free inference acceleration framework that dynamically caches block-wise features based on their similarity across adjacent timesteps. By ranking the evolution of residuals, Sortblock adaptively determines a recomputation ratio, selectively skipping redundant computations while preserving generation quality. Furthermore, we incorporate a lightweight linear prediction mechanism to reduce accumulated errors in skipped blocks.Extensive experiments across various tasks and DiT architectures demonstrate that Sortblock achieves over 2times inference speedup with minimal degradation in output quality, offering an effective and generalizable solution for accelerating diffusion-based generative models.

Training-free diffusion-based compression methods repurpose the generative priors of a diffusion or a flow model to compress data without retraining them as task-specific codecs. Recent codebook-based approaches such as Turbo-DDCM achieve strong perceptual quality at ultra-low bitrates, but their reliance on dense Gaussian codebooks remains costly in both memory and computation, and scales poorly with the large latent dimensions of modern image and video generators. Their combinatorial bitstream encoding further becomes computationally heavy at this scale. We introduce H-DDCM, a scalable generative compression framework that replaces Gaussian codebooks with implicit randomized Hadamard dictionaries. The fast Walsh-Hadamard transform allows for implicitly synthesizing full-dimensional dictionaries with O(d log d) compute for projection and reconstruction and O(d) memory, without materializing the full-dimensional dictionary. We further introduce an efficient table-free lexicographic coding scheme that makes combinatorial encoding practical at larger dimensions. Beyond images, we adapt the framework to an autoregressive video flow model and develop a streaming compression scheme that periodically re-encodes recently reconstructed frames into a fresh KV-cache prefix, preserving temporal context across segments at no additional transmitted bits. This enables long-form, close to real-time generative video compression on a single GPU. Across image and video benchmarks, H-DDCM achieves competitive rate-distortion-perception performance while substantially reducing the memory and computational overhead of codebook-based training-free generative compression.

We present ROCKET, a training-free model compression method that achieves state-of-the-art performance in comparison with factorization, structured-sparsification and dynamic compression baselines. Operating under a global compression budget, ROCKET comprises two key innovations: First, it formulates layer-wise compression allocation as a multi-choice knapsack problem, selecting the optimal compression level for each layer to minimize total reconstruction error while adhering to a target model size. Second, it introduces a single-step sparse matrix factorization inspired by dictionary learning: using only a small calibration set, it sparsifies weight coefficients based on activation-weights sensitivity and then updates the dictionary in closed form via least squares bypassing iterative optimization, sparse coding, or backpropagation entirely. ROCKET consistently outperforms existing compression approaches across different model architectures at 20-50\% compression rates. Notably, it retains over 90\% of the original model's performance at 30\% compression without any fine-tuning. Moreover, when applying a light fine-tuning phase, recovery is substantially enhanced: for instance, compressing Qwen3-14B to an 8B-parameter model and healing it with just 30 million tokens yields performance nearly on par with the original Qwen3-8B. The code for ROCKET is at github.com/mts-ai/ROCKET/tree/main.

Denoising diffusion models have been a mainstream approach for image generation, however, training these models often suffers from slow convergence. In this paper, we discovered that the slow convergence is partly due to conflicting optimization directions between timesteps. To address this issue, we treat the diffusion training as a multi-task learning problem, and introduce a simple yet effective approach referred to as Min-SNR-gamma. This method adapts loss weights of timesteps based on clamped signal-to-noise ratios, which effectively balances the conflicts among timesteps. Our results demonstrate a significant improvement in converging speed, 3.4times faster than previous weighting strategies. It is also more effective, achieving a new record FID score of 2.06 on the ImageNet 256times256 benchmark using smaller architectures than that employed in previous state-of-the-art. The code is available at https://github.com/TiankaiHang/Min-SNR-Diffusion-Training.

Lossless acceleration schemes, such as speculative decoding, promise significant inference speedups by relying on dynamic token-level alignment between a draft and a target model. However, this guarantee of semantic equivalence masks a severe operational vulnerability: draft-target alignment can be systematically attacked. In this paper, we introduce ADSD, which, to the best of our knowledge, is the first prompt-suffix attack that collapses verifier acceptance by pushing draft probability mass toward tokens the target is unlikely to accept. ADSD uses Soft-Collapse, a verifier-aligned surrogate derived from the asymmetric speculative acceptance rule, together with a target-preservation objective that discourages obvious task corruption. ADSD successfully generates highly effective adversarial suffixes. On the GSM8K dataset, our attack increases the mean sample time by 62.3% while preserving the task quality. We further show that this vulnerability exists across different domains, speculative decoding strategies, and model architectures.

Prevalent lossy image compression schemes can be divided into: 1) explicit image compression (EIC), including traditional standards and neural end-to-end algorithms; 2) implicit image compression (IIC) based on implicit neural representations (INR). The former is encountering impasses of either leveling off bitrate reduction at a cost of tremendous complexity while the latter suffers from excessive smoothing quality as well as lengthy decoder models. In this paper, we propose an innovative paradigm, which we dub Unicorn (Unified Neural Image Compression with One Nnumber Reconstruction). By conceptualizing the images as index-image pairs and learning the inherent distribution of pairs in a subtle neural network model, Unicorn can reconstruct a visually pleasing image from a randomly generated noise with only one index number. The neural model serves as the unified decoder of images while the noises and indexes corresponds to explicit representations. As a proof of concept, we propose an effective and efficient prototype of Unicorn based on latent diffusion models with tailored model designs. Quantitive and qualitative experimental results demonstrate that our prototype achieves significant bitrates reduction compared with EIC and IIC algorithms. More impressively, benefitting from the unified decoder, our compression ratio escalates as the quantity of images increases. We envision that more advanced model designs will endow Unicorn with greater potential in image compression. We will release our codes in https://github.com/uniqzheng/Unicorn-Laduree.

We introduce a state-of-the-art real-time, high-fidelity, audio codec leveraging neural networks. It consists in a streaming encoder-decoder architecture with quantized latent space trained in an end-to-end fashion. We simplify and speed-up the training by using a single multiscale spectrogram adversary that efficiently reduces artifacts and produce high-quality samples. We introduce a novel loss balancer mechanism to stabilize training: the weight of a loss now defines the fraction of the overall gradient it should represent, thus decoupling the choice of this hyper-parameter from the typical scale of the loss. Finally, we study how lightweight Transformer models can be used to further compress the obtained representation by up to 40%, while staying faster than real time. We provide a detailed description of the key design choices of the proposed model including: training objective, architectural changes and a study of various perceptual loss functions. We present an extensive subjective evaluation (MUSHRA tests) together with an ablation study for a range of bandwidths and audio domains, including speech, noisy-reverberant speech, and music. Our approach is superior to the baselines methods across all evaluated settings, considering both 24 kHz monophonic and 48 kHz stereophonic audio. Code and models are available at github.com/facebookresearch/encodec.

Diffusion Transformers offer state-of-the-art fidelity in image and video synthesis, but their iterative sampling process remains a major bottleneck due to the high cost of transformer forward passes at each timestep. To mitigate this, feature caching has emerged as a training-free acceleration technique that reuses or forecasts hidden representations. However, existing methods often apply a uniform caching strategy across all feature dimensions, ignoring their heterogeneous dynamic behaviors. Therefore, we adopt a new perspective by modeling hidden feature evolution as a mixture of ODEs across dimensions, and introduce HyCa, a Hybrid ODE solver inspired caching framework that applies dimension-wise caching strategies. HyCa achieves near-lossless acceleration across diverse domains and models, including 5.55 times speedup on FLUX, 5.56 times speedup on HunyuanVideo, 6.24 times speedup on Qwen-Image and Qwen-Image-Edit without retraining.

Model checkpoints are growing in both number and size, which makes archival, transfer, and deployment increasingly costly. General-purpose compressors can reduce storage requirements but ignore tensor structure, whereas existing tensor-specific compressors rely on fixed and format-specific pipelines. We present Brevis, which formulates lossless tensor compression as program synthesis. We design a typed domain-specific language (DSL) that captures recurring tensor structures, such as repeated regions and floating-point fields, through a set of reversible operators. Given a tensor, Brevis synthesizes a self-contained DSL program that reconstructs it bit-exactly. A checkpoint-specific production prior, learned from a small representative sample of tensors, guides a bounded A* search to synthesize compact programs, which can later be executed directly for bit-exact decompression. On 10 public checkpoints spanning language, audio, and image generation models, Brevis reduces 2.13 TB of checkpoint data to 1.41 TB, a 33.93% storage reduction. It produces archives up to 30.87% smaller than those of four general-purpose compressors, including zstd and gzip, and smaller archives than the tensor-specific compressors ZipNN and DFloat11. Under a practical concurrency configuration, Brevis achieves 3.60 GB/s compression and 6.61 GB/s decompression while preserving every source byte.

Entropy coding is widely used in typical learned image compression (LIC) that converts latents into a compact bitstream. However, entropy coding is typically sequential and becomes the coding latency bottleneck. To overcome it, we present Entropy-Coding Free Learned Image Compression (EF-LIC), a multi-rate framework that generates compact representation by removing statistical and correlation redundancy with low coding latency. First, we introduce unconstrained vector quantization and prove that its index distribution approaches the maximum-entropy bound, yielding minimal statistical redundancy. Second, we propose a context-conditioned autoregressive transform that directly reparameterizes the latents to reduce inter-dependency. Theoretical analysis shows that EF-LIC can remove correlation redundancy as effectively as typical LIC with entropy coding, leading to comparable compression performance. Experiments show EF-LIC achieves up to 67.86% bitrate reduction over MS-ILLM on Kodak with LPIPS. Ablation studies further show EF-LIC matches the compression performance of its entropy-coding based variant while achieving over 3times faster encoding and 5times faster decoding.

Diffusion models have recently gained unprecedented attention in the field of image synthesis due to their remarkable generative capabilities. Notwithstanding their prowess, these models often incur substantial computational costs, primarily attributed to the sequential denoising process and cumbersome model size. Traditional methods for compressing diffusion models typically involve extensive retraining, presenting cost and feasibility challenges. In this paper, we introduce DeepCache, a novel training-free paradigm that accelerates diffusion models from the perspective of model architecture. DeepCache capitalizes on the inherent temporal redundancy observed in the sequential denoising steps of diffusion models, which caches and retrieves features across adjacent denoising stages, thereby curtailing redundant computations. Utilizing the property of the U-Net, we reuse the high-level features while updating the low-level features in a very cheap way. This innovative strategy, in turn, enables a speedup factor of 2.3times for Stable Diffusion v1.5 with only a 0.05 decline in CLIP Score, and 4.1times for LDM-4-G with a slight decrease of 0.22 in FID on ImageNet. Our experiments also demonstrate DeepCache's superiority over existing pruning and distillation methods that necessitate retraining and its compatibility with current sampling techniques. Furthermore, we find that under the same throughput, DeepCache effectively achieves comparable or even marginally improved results with DDIM or PLMS. The code is available at https://github.com/horseee/DeepCache

While Key-Value (KV) cache succeeds in reducing redundant computations in auto-regressive models, it introduces significant memory overhead, limiting its practical deployment in long-sequence scenarios. Existing KV retrieval methods mitigate this by dynamically retaining only a subset of KV entries on the GPU. However, they still suffer from notable efficiency and accuracy bottlenecks due to per-token retrieval and coarse-grained page-level KV management, especially in long-output reasoning scenarios. With the emergence of large reasoning models, efficiently handling such scenarios has become increasingly important. To address this issue, we present two key observations: (1) critical KVs exhibit strong temporal locality during decoding, and (2) these KVs exhibit distinct distribution patterns across the input prompt and generated output. Building on these observations, we propose LouisKV, an efficient KV cache retrieval framework designed for various long-sequence scenarios. Specifically, LouisKV introduces a semantic-aware retrieval strategy leveraging temporal locality to trigger retrieval only at semantic boundaries, drastically reducing computation and data transfer overhead. LouisKV also designs a decoupled, fine-grained management scheme that tailors differentiated strategies for input and output sequences to create retrieval units that better match the model's attention patterns, enabling precise identification of critical KVs. Furthermore, to boost efficiency, LouisKV incorporates several kernel-level optimizations, including custom Triton and CUDA kernels to accelerate the KV clustering and retrieval. Evaluations show that LouisKV achieves up to 4.7times speedup over state-of-the-art KV retrieval methods while maintaining near-lossless accuracy across diverse long-sequence tasks, including long-input short-output, short-input long-output, and long-input long-output scenarios.

Autoregressive large language models (LLMs) deliver strong performance but require inherently sequential decoding, leading to high inference latency and poor GPU utilization. Speculative decoding mitigates this bottleneck by using a fast draft model whose outputs are verified in parallel by the target LLM; however, existing methods still rely on autoregressive drafting, which remains sequential and limits practical speedups. Diffusion LLMs offer a promising alternative by enabling parallel generation, but current diffusion models typically underperform compared with autoregressive models. In this paper, we introduce DFlash, a speculative decoding framework that employs a lightweight block diffusion model for parallel drafting. By generating draft tokens in a single forward pass and conditioning the draft model on context features extracted from the target model, DFlash enables efficient drafting with high-quality outputs and higher acceptance rates. Experiments show that DFlash achieves over 6x lossless acceleration across a range of models and tasks, delivering up to 2.5x higher speedup than the state-of-the-art speculative decoding method EAGLE-3.

We compress KV cache entries by quantizing angles in the Fast Walsh-Hadamard domain, where a random diagonal rotation makes consecutive element pairs approximately uniformly distributed on the unit circle. We extend this angular quantizer with per-layer early-boost, which independently configures K and V codebook sizes at each layer, allocating higher precision to a model-specific subset of critical layers. Across seven models (1B to 7B parameters), per-layer early-boost achieves lossless compression on four models and near-lossless quality on six of seven, at 3.28 to 3.67 angle bits per element. Asymmetric norm quantization (8-bit for keys, 4-bit log-space for values) yields 6.56 total bits per element on Mistral-7B with perplexity degradation of +0.0014 and no calibration data. A layer-group sensitivity analysis reveals model-specific bottleneck patterns, including K-dominated versus V-dominated layers and negative-transfer layers where increased precision degrades quality.

As large language models (LLMs) become increasingly powerful, the sequential nature of autoregressive generation creates a fundamental throughput bottleneck that limits the practical deployment. While Multi-Token Prediction (MTP) has demonstrated remarkable benefits for model training efficiency and performance, its inherent potential for inference acceleration remains largely unexplored. This paper introduces FastMTP, a simple yet effective method that improves multi-step draft quality by aligning MTP training with its inference pattern, significantly enhancing speculative decoding performance. Our approach fine-tunes a single MTP head with position-shared weights on self-distilled data, enabling it to capture dependencies among consecutive future tokens and maintain high acceptance rates across multiple recursive draft steps. By integrating language-aware dynamic vocabulary compression into the MTP head, we further reduce computational overhead in the drafting process. Experimental results across seven diverse benchmarks demonstrate that FastMTP achieves an average of 2.03x speedup compared to standard next token prediction with lossless output quality, outperforming vanilla MTP by 82%. FastMTP requires only lightweight training and seamlessly integrates with existing inference frameworks, offering a practical and rapidly deployable solution for accelerating LLM inference.

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

World Action Models (WAMs) incorporate visual representations from video generation backbones to guide action prediction. Recent efficient WAMs adopt Mixture-of-Transformers (MoT) architectures and compute video representations once for reuse by the action expert. However, intra-expert iteration (\ie, multi-step action denoising) and inter-expert waiting (\ie, sequential execution of the video and action experts) still limit inference efficiency. To this end, we present RealtimeWAM, an extremely efficient WAM variant with one-step action generation and asynchronous inference, addressing these two bottlenecks. To reduce intra-expert iteration, we propose Teacher-Anchored Consistency Distillation (TACD) to address a local-global error gap: low local consistency error alone does not guarantee accurate final actions. TACD supplements local consistency with explicit supervision from the frozen teacher's multi-step rollout endpoint, enabling accurate one-step action generation. Additionally, we propose Cross-Expert Wavefront Pipelining (CEWP) to eliminate unnecessary expert-level waiting. It overlaps the two experts through block-wise sharing of the video KV cache, synchronizing only immediately before the corresponding action attention consumes it. Extensive experiments across diverse benchmarks (\eg, LIBERO, LIBERO-Plus and RoboTwin) and model variants (\eg, Fast-WAM and Faster-WAM) demonstrate the superiority of RealtimeWAM. Notably, RealtimeWAM maintains near-lossless performance (\ie, <1% drop) across these benchmarks while delivering significant end-to-end speedup (\eg, sim25times on H100). Our code and checkpoints are available via this https://github.com/ModelTC/LightX2V/tree/main/examples/realtimewam{link}.

Real-time video generation demands fast decoding as much as fast denoising, yet current latent video diffusion models rely on 3D convolutional decoders that are slow and memory-intensive at high resolutions or for long video. We introduce FlashDecoder, a fast, memory-efficient pure-Transformer video decoder that decodes latents to pixels frame by frame. At each step, the current frame attends only to a fixed-size window of past frames through a rolling KV cache. The fixed temporal window keeps decoding fast and memory bounded regardless of video length, enabling constant-latency streaming. Because frames are processed sequentially, temporal causality is enforced without explicit attention masks, enabling training at resolutions up to 1080p and matching the reconstruction quality of convolutional decoders. On the Wan2.1 and Wan2.2 latent spaces, FlashDecoder matches each convolutional decoder in reconstruction quality (e.g., 41.55dB vs. 41.49dB PSNR at 1080p) while decoding 3.6x-4.7x faster with up to 11x less memory on a single H100 GPU. With architecture-aware inference optimizations, the speedup widens to 12x.

Diffusion Transformers (DiTs) have achieved state-of-the-art video generation quality, but they incur immense computational cost because standard inference applies the same number of denoising steps uniformly to every token in the sequence. It is well known that human vision ignores vast amounts of redundant motion. Why, then, do our densest models treat every spatiotemporal token with equal priority? In this paper, we introduce Heterogeneous Step Allocation (HSA), a training-free inference algorithm that assigns varying step budgets to different spatiotemporal tokens based on their velocity dynamics. To resolve the resulting sequence-length mismatch without sacrificing global context, HSA introduces a KV-cache synchronization mechanism that allows active tokens to attend to the full sequence while entirely bypassing inactive tokens. Furthermore, we derive a cached Euler update that advances the latent states of skipped tokens in a single operation without additional model evaluations. We evaluate HSA on the Wan-2 and LTX-2 models for both text-to-video (T2V) and image-to-video (I2V) generation. Our results demonstrate that HSA significantly outperforms previous state-of-the-art caching methods and the vanilla Flow Matching baseline, especially at aggressive acceleration regimes (e.g., 50% and 25% runtimes). Crucially, HSA achieves a superior quality-runtime Pareto frontier without the need for expensive offline profiling, robustly preserving structural integrity and generation quality even under tight computational budgets. Project page: https://ernestchu.github.io/hsa

Diffusion Transformers have established a new state-of-the-art in image synthesis, but the high computational cost of iterative sampling severely hampers their practical deployment. While existing acceleration methods often focus on the temporal domain, they overlook the substantial spatial redundancy inherent in the generative process, where global structures emerge long before fine-grained details are formed. The uniform computational treatment of all spatial regions represents a critical inefficiency. In this paper, we introduce Just-in-Time (JiT), a novel training-free framework that addresses this challenge by acceleration in the spatial domain. JiT formulates a spatially approximated generative ordinary differential equation (ODE) that drives the full latent state evolution based on computations from a dynamically selected, sparse subset of anchor tokens. To ensure seamless transitions as new tokens are incorporated to expand the dimensions of the latent state, we propose a deterministic micro-flow, a simple and effective finite-time ODE that maintains both structural coherence and statistical correctness. Extensive experiments on the state-of-the-art FLUX.1-dev model demonstrate that JiT achieves up to a 7x speedup with nearly lossless performance, significantly outperforming existing acceleration methods and establishing a new and superior trade-off between inference speed and generation fidelity.

Long-context inference in large language models is bottlenecked by the quadratic cost of full attention. Existing efficient alternatives often rely either on native sparse training or on heuristic token eviction, creating an undesirable trade-off among efficiency, training cost, and accuracy. In this work, we show that full-attention LLMs are already intrinsically sparse and can be transformed into highly sparse models with only minimal adaptation. Our approach is built on three observations: (1) only a small subset of attention heads truly requires full long-context processing; (2) long-range retrieval is governed primarily by a low-dimensional subspace, allowing relevant tokens to be retrieved efficiently with a 16-dimensional indexer; and (3) the useful token budget is strongly query-dependent, making dynamic top-p selection more suitable than fixed top-k sparsification. Based on these insights, we propose RTPurbo, which retains the full KV cache only for retrieval heads and introduces a lightweight token indexer for sparse attention. By exploiting the model's intrinsic sparsity, RTPurbo achieves sparsification with only a few hundred training steps. Experiments on long-context benchmarks and reasoning tasks show that RTPurbo preserves near-lossless accuracy while delivering substantial efficiency gains, including up to a 9.36times prefill speedup at 1M context and about a 2.01times decode speedup. These results suggest that strong sparse inference can be obtained from standard full-attention training without expensive native sparse pretraining.

Looped Transformers have attracted substantial attention as a parameter-efficient approach to increasing computational depth through repeated application of shared Transformer blocks. However, their practical advantages over conventional Transformers remain under debate: each additional loop incurs another Transformer pass and requires caching another set of KV states, causing inference FLOPs and KV-cache memory to grow continuously with loop depth. This overhead becomes particularly severe at large loop counts and long context, preventing the parameter efficiency of Looped Transformers from translating into practical inference efficiency. In this paper, we find that much of the additional computation and storage introduced by looping is redundant. As recurrence proceeds, state changes become increasingly concentrated on a small subset of tokens; attention-output differences are dominated by a sparse and stable subset of key columns; and KV residuals between adjacent loops become progressively more amenable to low-bit quantization. Building on these observations, we introduce FlashLoop, a training-free inference framework that reduces cross-loop redundancy through token-sparse updates, sparse attention, and KV-residual quantization. Across several Looped Transformers models, FlashLoop delivers lossless accuracy while achieving up to 1.64times end-to-end speedup and up to 6times KV-cache memory reduction, substantially improving the practicality of scaling Looped Transformers to greater computational depths and longer context.

Post-training quantization of Large Language Models (LLMs) is challenging. In this work, we introduce Low-rank Quantization Error Reduction (LQER), which combines quantization and low-rank approximation to recover the model capability. LQER leverages an activation-induced scale matrix to drive the singular value distribution of quantization error towards a desirable distribution, which enables nearly-lossless W4A8 quantization on various LLMs and downstream tasks without the need for knowledge distillation, grid search, or gradient-base iterative optimization. Unlike existing methods, the computation pattern of LQER eliminates the need for specialized Scatter and Gather processes to collect high-precision weights from irregular memory locations. Our W4A8 LLMs achieve near-lossless performance on six popular downstream tasks, while using 1.36times fewer hardware resources than the leading state-of-the-art method. We will open-source our framework once the paper is accepted.

Block diffusion LLMs are emerging as a promising next paradigm for language generation, but their use of KV caching makes memory access a dominant bottleneck in long-context settings. While dynamic sparse attention has been actively explored, existing methods designed for autoregressive LLMs rely on approximate importance estimation and perform poorly when adapted to block diffusion. This work identifies a key opportunity unique to block diffusion: attention at the first All-[MASK] denoising step reliably predicts important KV entries and budget requirements, enabling MAGE to perform a single exact attention pass per block and reuse it for training-free sparse denoising. Across long-context benchmarks including LongBench and Needle-in-a-Haystack, MAGE achieves near-lossless accuracy with a fraction of the KV budget while delivering up to 3-4x end-to-end speedup, consistently outperforming AR-oriented sparse attention baselines. A lightweight fine-tuning strategy further strengthens [MASK]-guided patterns with minimal cost, requiring only a few hours of training on a single NVIDIA H100 GPU for both 1.5B and 7B models.

We introduce Orthrus, a simple and efficient dual-architecture framework that unifies the exact generation fidelity of autoregressive Large Language Models (LLMs) with the high-speed parallel token generation of diffusion models. The sequential nature of standard autoregressive decoding represents a fundamental bottleneck for high-throughput inference. While diffusion language models attempt to break this barrier via parallel generation, they suffer from significant performance degradation, high training costs, and a lack of rigorous convergence guarantees. Orthrus resolves this dichotomy natively. Designed to seamlessly integrate into existing Transformers, the framework augments a frozen LLM with a lightweight, trainable module to create a parallel diffusion view alongside the standard autoregressive view. In this unified system, both views attend to the exact same high-fidelity Key-Value (KV) cache; the autoregressive head executes context pre-filling to construct accurate KV representations, while the diffusion head executes parallel generation. By employing an exact consensus mechanism between the two views, Orthrus guarantees lossless inference, delivering up to a 7.8x speedup with only an O(1) memory cache overhead and minimal parameter additions.

Self-attention dominates the computational and memory cost of long-context LLM inference across both prefill and decode phases. To address this challenge, we introduce Sketch&Walk Attention, a training-free sparse attention method that determines sparsity with lightweight sketches and deterministic walk. Sketch&Walk applies Hadamard sketching to get inexpensive approximations of attention scores, then aggregates these estimates across layers via a walk mechanism that captures attention influence beyond direct interactions between tokens. The accumulated walk scores are used to select top-k attention blocks, enabling dynamic sparsity with a single training-free algorithm that applies uniformly to both the prefill and decode phases, together with custom sparse attention kernels. Across a wide range of models and tasks, Sketch&Walk maintains near-lossless accuracy at 20% attention density and can slightly outperform dense attention in some settings, while achieving up to 6x inference speedup.

Transformers yield state-of-the-art results across many tasks. However, their heuristically designed architecture impose huge computational costs during inference. This work aims on challenging the common design philosophy of the Vision Transformer (ViT) model with uniform dimension across all the stacked blocks in a model stage, where we redistribute the parameters both across transformer blocks and between different structures within the block via the first systematic attempt on global structural pruning. Dealing with diverse ViT structural components, we derive a novel Hessian-based structural pruning criteria comparable across all layers and structures, with latency-aware regularization for direct latency reduction. Performing iterative pruning on the DeiT-Base model leads to a new architecture family called NViT (Novel ViT), with a novel parameter redistribution that utilizes parameters more efficiently. On ImageNet-1K, NViT-Base achieves a 2.6x FLOPs reduction, 5.1x parameter reduction, and 1.9x run-time speedup over the DeiT-Base model in a near lossless manner. Smaller NViT variants achieve more than 1% accuracy gain at the same throughput of the DeiT Small/Tiny variants, as well as a lossless 3.3x parameter reduction over the SWIN-Small model. These results outperform prior art by a large margin. Further analysis is provided on the parameter redistribution insight of NViT, where we show the high prunability of ViT models, distinct sensitivity within ViT block, and unique parameter distribution trend across stacked ViT blocks. Our insights provide viability for a simple yet effective parameter redistribution rule towards more efficient ViTs for off-the-shelf performance boost.

Deploying large language models (LLMs) for long-context inference remains challenging due to their substantial memory and computational demands. While techniques such as Key-Value (KV) cache compression are designed to reduce memory usage, they often neglect the structured sparsity inherent in the relationship between hidden states and their corresponding KV cache. In this work, we explore the role of uncertainty as a potential indicator of sparsity within LLMs. We propose UNComp, an uncertainty-aware framework that leverages truncated matrix entropy to identify areas of low information content, thereby revealing sparsity patterns that can be used for adaptive compression. Unlike traditional methods that apply uniform compression, UNComp dynamically adjusts its approach to compression, guided by uncertainty measures that reflect the importance of various model components. Our analysis shows that sparsity patterns, when derived from uncertainty estimates, can be exploited to reveal special long-range dependencies, such as retrieval heads and retrieval layers. This perspective not only enhances our understanding of how compression can be optimized but also provides new insights into the inherent sparsity of LLMs during long-context inference. By focusing on uncertainty to analyze the sparsity pattern in detail, UNComp reduces the KV cache size to 4.74% of the original, achieves a 6% prefill speedup, and improves throughput by 6.4x - not only delivering strong lossless compression performance, but also validating the effectiveness of the underlying theoretical tool. We release the code at https://github.com/menik1126/UNComp.

Diffusion Transformers (DiTs) have revolutionized high-fidelity video generation, yet their O(L^2) attention complexity poses a formidable bottleneck for long-sequence synthesis. While recent sparse-linear attention hybrids aim to mitigate this, their performance severely degrades at extreme sparsity due to the "RoPE Dilemma": standard linear attention fails to preserve the orthogonal relative-position structure of 3D Rotary Position Embeddings (RoPE), neutralizing vital distance awareness. To address this, we propose RoPeSLR, a 3D RoPE-guided Sparse-LowRank attention framework. We establish that under empirically validated assumptions, the DiT attention manifold admits a decoupling into a high-frequency semantic spike set (bounded by O(L^{3/2}) sparsity) and an extreme low-rank (O(d_h log L)) background continuum. Guided by this structural prior, RoPeSLR eschews standard linear attention for a head-wise low-rank parameterization equipped with a learnable 3D Absolute Positional Embedding (PE) injection, seamlessly synthesizing long-range relative distance decay. By guaranteeing sub-quadratic sparsity and sub-linear rank growth, RoPeSLR is exceptionally suited for scaling to ultra-long video inference. Extensive evaluations validate this scalable superiority: at 90\% sparsity, RoPeSLR achieves up to 10times fewer FLOPs on Wan2.1-1.3B and delivers a 2.26times end-to-end inference speedup on the ultra-long 100K+ token sequences of HunyuanVideo-13B, all while maintaining near-lossless generation fidelity (less than 1.3\% average VBench degradation).

Speculative decoding accelerates autoregressive generation in large language models. In each drafting stage, a lightweight draft model proposes tokens that the target model subsequently verifies. With increasingly capable draft models, we find that the target model frequently accepts all tokens produced in a drafting stage. A verification nevertheless follows each drafting stage, resulting in unnecessary target-model forward passes even when drafting could have continued. Adaptive draft length methods decide during decoding how many draft tokens precede a verification, but they raise the speedup only for autoregressive draft models. For a parallel draft model, drafting further requires target-model hidden states for draft tokens that have not been verified. We propose DLoop, a looped form of speculative decoding that adaptively performs multiple drafting stages before verification. DLoop continues drafting while the draft model remains confident and verifies all accumulated draft tokens together. Loop-aware training keeps the draft model reliable in the additional drafting stages by exposing it to its own hidden states for unverified draft tokens. By spending additional draft-model forward passes, DLoop reduces the number of target-model forward passes required for verification. Across diverse speculative decoding methods including EAGLE-3, DFlash, Domino, DSpark, and multi-token prediction modules, DLoop improves the wall-clock speedup by 5 to 41 percent while preserving lossless decoding. Code will be available at https://github.com/naver-ai/DLoop.

Speculative decoding accelerates large language model (LLM) inference by using a lightweight drafter to propose a block of tokens that the target model verifies in one parallel pass. Autoregressive drafters generate this block one token at a time, whereas block diffusion drafters such as DFlash generate it in one pass, making drafting faster. However, these diffusion drafters predict each token independently, ignoring dependencies between tokens in the block. We introduce FlashMap, a continuous flow drafter that conditions a flow map language model on the target model's hidden states and generates the whole block in one forward pass while capturing inter-token dependencies. On Qwen3-8B, FlashMap is faster than a matched DFlash baseline on every benchmark, with 7% higher average speedup and up to 6.1x lossless acceleration.

In visual generation, the quadratic complexity of attention mechanisms results in high memory and computational costs, especially for longer token sequences required in high-resolution image or multi-frame video generation. To address this, prior research has explored techniques such as sparsification and quantization. However, these techniques face significant challenges under low density and reduced bitwidths. Through systematic analysis, we identify that the core difficulty stems from the dispersed and irregular characteristics of visual attention patterns. Therefore, instead of introducing specialized sparsification and quantization design to accommodate such patterns, we propose an alternative strategy: *reorganizing* the attention pattern to alleviate the challenges. Inspired by the local aggregation nature of visual feature extraction, we design a novel **Pattern-Aware token ReOrdering (PARO)** technique, which unifies the diverse attention patterns into a hardware-friendly block-wise pattern. This unification substantially simplifies and enhances both sparsification and quantization. We evaluate the performance-efficiency trade-offs of various design choices and finalize a methodology tailored for the unified pattern. Our approach, **PAROAttention**, achieves video and image generation with lossless metrics, and nearly identical results from full-precision (FP) baselines, while operating at notably lower density (~20%-30%) and bitwidth (**INT8/INT4**), achieving a **1.9x** to **2.7x** end-to-end latency speedup.

Large language models (LLMs) now support context windows of hundreds of thousands to millions of tokens, enabling applications such as long-document summarization, large-scale code synthesis, multi-document question answering and persistent multi-turn dialogue. However, such extended contexts exacerbate the quadratic cost of self-attention, leading to severe latency in autoregressive decoding. Existing sparse attention methods alleviate these costs but rely on heuristic patterns that struggle to recall critical key-value (KV) pairs for each query, resulting in accuracy degradation. We introduce Adamas, a lightweight yet highly accurate sparse attention mechanism designed for long-context inference. Adamas applies the Hadamard transform, bucketization and 2-bit compression to produce compact representations, and leverages Manhattan-distance estimation for efficient top-k selections. Experiments show that Adamas matches the accuracy of full attention with only a 64-token budget, achieves near-lossless performance at 128, and supports up to 8x higher sparsity than prior state-of-the-art (SOTA) methods while delivering up to 4.4x self-attention and 1.5x end-to-end speedups on 32K-length sequences. Remarkably, Adamas attains comparable or even lower perplexity than full attention, underscoring its effectiveness in maintaining accuracy under aggressive sparsity.

Speculative decoding is a powerful way to accelerate autoregressive large language models (LLMs), but directly porting it to vision-language models (VLMs) faces unique systems constraints: the prefill stage is dominated by visual tokens whose count scales with image resolution and video length, inflating both compute and memory, especially the key-value (KV) cache. We study speculative decoding for VLMs and introduce SpecVLM, a practical system that (1) establishes a strong EAGLE-2-style baseline, EagleVLM, delivering 1.5--2.3x end-to-end speedups over full autoregressive inference, and (2) further accelerates VLM inference with an elastic visual compressor that adaptively selects among pruning, pooling, convolution, and resampler primitives to balance FLOPs/parameters and accuracy per input. To avoid costly offline distillation corpora, we propose an online-logit distillation protocol that trains the draft model with on-the-fly teacher logits and penultimate features using a combined cross-entropy and Smooth L1 objective, eliminating storage and preprocessing while remaining compute-efficient. This protocol reveals a training-time scaling effect: longer online training monotonically increases the draft model's average accepted length, improving speculative efficiency. Empirically, SpecVLM achieves additional acceleration, culminating in 2.5--2.9x end-to-end speedups within 5 epochs across LLaVA and MMMU, consistently over resolutions and task difficulties, while preserving the target model's output distribution (lossless decoding). Our code is available at https://github.com/haiduo/SpecVLM.

Existing methods for evaluating large language models face challenges such as data contamination, sensitivity to prompts, and the high cost of benchmark creation. To address this, we propose a lossless data compression based evaluation approach that tests how models' predictive abilities generalize after their training cutoff. Specifically, we collect comprehensive test data spanning 83 months from 2017 to 2023 and split the data into training and testing periods according to models' training data cutoff. We measure: 1) the compression performance on the testing period as a measure of generalization on unseen data; and 2) the performance gap between the training and testing period as a measure of robustness. Our experiments test 14 representative large language models with various sizes on sources including Wikipedia, news articles, code, arXiv papers, and multi-modal data. We find that the compression rate of many models reduces significantly after their cutoff date, but models such as Mistral and Llama-2 demonstrate a good balance between performance and robustness. Results also suggest that models struggle to generalize on news and code data, but work especially well on arXiv papers. We also find the context size and tokenization implementation have a big impact of on the overall compression performance.

In language modeling based music generation, a generated waveform is represented by a sequence of hierarchical token stacks that can be decoded either in an auto-regressive manner or in parallel, depending on the codebook patterns. In particular, flattening the codebooks represents the highest quality decoding strategy, while being notoriously slow. To this end, we propose a novel stack-and-delay style of decoding strategy to improve upon the flat pattern decoding where generation speed is four times faster as opposed to vanilla flat decoding. This brings the inference time close to that of the delay decoding strategy, and allows for faster inference on GPU for small batch sizes. For the same inference efficiency budget as the delay pattern, we show that the proposed approach performs better in objective evaluations, almost closing the gap with the flat pattern in terms of quality. The results are corroborated by subjective evaluations which show that samples generated by the new model are slightly more often preferred to samples generated by the competing model given the same text prompts.

Multi-vector vision-language retrievers enable fine-grained Visual Document Retrieval (VDR) through late interaction, but storing and scoring hundreds of visual patch embeddings per page incurs substantial overhead. Existing training-free methods rely on pruning or merging: pruning degrades sharply under aggressive compression, whereas merging does not explicitly prioritize important regions when forming representatives. We introduce AnchorFold, a training-free focus-then-fold framework for document-side index compression. AnchorFold applies Recursive Attention Propagation over visual self-attention graphs, performing multi-step propagation within each attention head and integrating scores across heads and layers. The focus stage selects the highest-centrality tokens as anchors. The fold stage assigns remaining tokens to their most similar anchors in the normalized retrieval space and summarizes each anchor-centered group through centrality-weighted aggregation. This preserves non-anchor contributions while concentrating capacity on structurally important tokens. Across ViDoRe v1/v2 and REAL-MM-RAG with three diverse retrieval backbones, AnchorFold consistently outperforms all evaluated training-free baselines at γleq 0.20. On ViDoRe v1/v2, it retains 98.3% of full-index NDCG@5 on average at 5times compression, achieving near-lossless compression, and 92.4% at 20times compression.

Neural autoencoders underpin generative models. Practical, large-scale use of neural autoencoders for generative modeling necessitates fast encoding, low latent rates, and a single model across representations. Existing approaches are reconstruction-first: they incur high latent rates, slow encoding, and separate architectures for discrete vs. continuous latents and for different audio channel formats, hindering workflows from preprocessing to inference conditioning. We introduce a generative-first architecture for audio autoencoding that increases temporal downsampling from 2048x to 3360x and supports continuous and discrete representations and common audio channel formats in one model. By balancing compression, quality, and speed, it delivers 10x faster encoding, 1.6x lower rates, and eliminates channel-format-specific variants while maintaining competitive reconstruction quality. This enables applications previously constrained by processing costs: a 60-second mono signal compresses to 788 tokens, making generative modeling more tractable.

The landscape of image generation has been forever changed by open vocabulary diffusion models. However, at their core these models use transformers, which makes generation slow. Better implementations to increase the throughput of these transformers have emerged, but they still evaluate the entire model. In this paper, we instead speed up diffusion models by exploiting natural redundancy in generated images by merging redundant tokens. After making some diffusion-specific improvements to Token Merging (ToMe), our ToMe for Stable Diffusion can reduce the number of tokens in an existing Stable Diffusion model by up to 60% while still producing high quality images without any extra training. In the process, we speed up image generation by up to 2x and reduce memory consumption by up to 5.6x. Furthermore, this speed-up stacks with efficient implementations such as xFormers, minimally impacting quality while being up to 5.4x faster for large images. Code is available at https://github.com/dbolya/tomesd.